車充IC芯片

概述

HC6312是一款輸入耐壓可達30V，并且能夠?qū)崿F(xiàn)精確恒壓以及恒流的降壓型DC-DC轉換器  車充IC芯片
HC6312內置65mΩ Power MOS，可支持2.5A持續輸出電流
HC6312具備高性能的負載響應以及輸入電壓響應能力，同時精確的恒壓和恒流控制環路實現極小的負載調整率和線性調整率，±3%的恒流精度優于市面上絕大多數同類產品
HC6312無需外部補償，可以依靠自身內置穩定環路實現恒流以及恒壓控制，同時具備線纜壓降補償功能
HC6312是一款應用極簡，性能，穩定可靠的恒壓恒流降壓型DC-DC轉換器
?
  特點
- 高性價比車載充電器方案
- 輸入耐壓可達30
- 內置65mΩ Power MOS，可支持2.5A持續輸出電流
- 內置高精度恒流以及恒壓控制環路
- 超高恒流精度 ±5%
- 恒壓精度 ±2%
- 無需外部補償
- 135k Hz固定開關頻率
- 線纜補償壓降
- 短路保護(SCP)，過熱保護（OTP），過壓保護（OVP）以及欠壓保護（UVLO）
- SOP-8L封裝形式

AAP6153A is a step down PWM controller with a driving dual output current to 8A (4A+4A). It is designed to allow for operating a wide supply voltage range from 9V to 40V. The external shutdown function can be controlled by logic level to pull COMP/EN pin down, and then comes into standby mode. The external compensation makes feedback control have good line and load regulation with flexible external design.
The AAP6153A operates in the CC(Constant output Current) mode or CV(Constant output Voltage) mode, and the OCP current value is set by current sensing resisters.
The AAP6153A is suitable for the DC/DC switching power applications when requested the current limit function. The devices are available in MSOP-10L packages and require very few external devices for operation.
AAP6153A FEATURES 
VIN Operate with 9V ~ 40V Supply Voltage
- VOUT Accuracy (VREF =1.0V) ±2.0%
- Dual-Channeling CC/CV Mode Control
- External Current Limit Setting for 2 channel
- Over Temperature Protection
- Internal Soft Start ~ 3ms
- Fixed Frequency 120KHz
- UVLO Protection (min=7V, typ=7.5V, max=8V)
- Duty Cycle Range (0~90%)
- Single Pin to External Compensation and Shutdown Control
- COUT MLCC support.
- Built in Adjustable Line-Compensation
- MSOP-10L Package
AAP6153A APPLICATION