西門子PM240功率模塊6SL3210-1PE22-7UL0

相似圖像SINAMICS 功率模塊 PM240-2 未過濾 帶集成式制動斬波器 380-480V+10/-10% 三相交流 47-63Hz 重過載功率：7.5kW 當 200% 3S，150% 57S， 100% 240S；環境溫度 -10 至 +50°C；功率 輕過載：11kW 當 150% 3S，110% 57S， 100% 240S；環境溫度 -10 至 +40°C 355x 140x 165（高x寬x深）,FSC 防護等級 IP20 不帶控制單元和 操作單元 批準從 CU 固件- 版本 4.6版起已獲得許可

?河南兆陽公司在經營活動中精益求精，具備如下業務優勢：
 SIEMENS 可編程控制器1、SIMATIC S7 系列PLC：S7-200、S7-1500、S7-1200、S7-1500、S7-300、S7-400、ET-200邏輯控制模塊 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
2、SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.3、 HMI  觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
      SIEMENS 交、直流傳動裝置
4、 交流變頻器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.
MIDASTER系列：  MDV
5、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
       SIEMENS 數控 伺服電機
6、SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
      系統及伺服電機，力矩電機，直線電機，伺服驅動等備件銷售。
西門子PLC模塊    西門子變頻器    西門子觸摸屏  西門子電線電纜  西門子數控系統等
?

SINAMICS G120是一種包含各種功能單元的模塊化變頻器系統。基本上包括：

1、控制單元 (CU)

2、電源模塊 (PM)

CU在多種可以選擇的操作模式下對 PM 和連接的電機進行控制和監視。通過控制單元，可與本地控制器以及監視設備進行通訊。電源模塊的功率范圍為 0.37 kW 至 250 kW。

SINAMICS G120優點簡介

1、 具有很多創新功能

具有用于安全相關機器與系統的 Safety Integrated 功能，能夠向輸入電源進行再生反饋以節約電能，采用新的冷卻方式

2、組態和調試更加快速

使用 SIZER 和 STARTER 工具；并使用基本操作員面板 (BOP) 和微型存儲卡進行數據備份

3、 一致的解決方案

通過全集成自動化 (TIA)，取得從 SINAMICS 直至自動化級別的一致性

SINAMICS G120技術數據

380 – 690 V ± 10三相交流，0.37 - 250 kW

SINAMICS G120 –典型用途

SINAMICS G120尤其適合用作整個工業與貿易領域內的通用變頻器，例如，可在汽車、紡織、印刷、化工等領域以及一般高級應用（如輸送應用）中使用。

河南兆陽自動化科技有限公司銷售西門子千萬余產品 盡新老顧客您來詢價訂貨采購，歡迎您來兆陽公司，謝謝您的光臨！ 
連系人  ：邵經理
電   ：191+ 39 98+ 27 30        同微號?

4.額定功率范圍為0.5518.5 kW，結構緊湊，調試快速，操作簡便，易于維護，并具有高度集成的特點。

5.該緊湊型變頻器是同等級變頻器中功率密度較高的產品，可作為一個模塊直接安裝，而不會損失功率，其安裝空間比市場上的常規系統低30，而功率密度則高出40。

針對小型控制柜的應用，Sinamics G120C型變頻器專門進行了優化，方便靠近或直接在機器設備上安裝。這些應用僅需要速度可控的簡單驅動裝置，無需占用太大空間。       

該設備允許用戶通過一個存儲卡插槽，實現參數拷貝，并進行快速調試；用戶也可用一個操作員面板來取代盲蓋板實現簡單調試；還可以借助一個電腦USB接口對該變頻器進行參數設置。

此外，Sinamics G120C型變頻器還包含Sinamics平臺上被用戶廣為接受的控制步驟，無傳感器的矢量操作可實現對感應電機節能運行的控制。設備還支持西門子的Profibus總線系統，通過USS現場總線協議、RTU模式和CAN總線，也可將其直接集成到其他廣泛采用的通訊結構中。

西門子PM240功率模塊6SL3210-1PE22-7UL0?

?概述

PM240?2 Power Modules – 0.55 kW to 250 kW (0.75 hp to 400 hp), IP20 degree of protection

PM240?2 Power Modules, frame sizes FSA to FSG (with Control Unit and Operator Panel)

The PM240?2 Power Modules are based on a new hardware platform. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.

Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM240?2 Power Modules in frame sizes FSA to FSF are available both with and without an integrated line filter class A of compact design for 200 V, 400 V and 690 V line voltages (except PM240?2 frame sizes FSD to FSF: 200 V). The PM240?2 Power Modules in frame size FSG are available with an integrated line filter Category C3 of compact design for 400 V and 690 V line voltages, also with integrated line filter Category C2 for a line voltage of 400 V. In addition, a DC link reactor is integrated in the PM240?2 Power Modules, frame sizes FSD to FSG, and therefore no line reactor is required.

The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.

The PM240?2 Power Module has an integrated braking chopper. In generating mode, the excess energy of the DC link can be dissipated by means of an optional braking resistor.

The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).

Push-through variant

Example: PM240?2 Power Modules, degree of protection IP20, push-through variant, frame sizes FSD to FSF (with Control Unit and Operator Panel)

The push-through variants in the frame sizes FSA to FSF allow the cooling fins of the Power Modules to be pushed through the rear panel of the control cabinet. Push-through variants should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.

Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.

PM250 Power Modules – 7.5 kW to 90 kW (10 hp to 125 hp), IP20 degree of protection

PM250 Power Modules, frame sizes FSC to FSF

PM250 Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking chopper is not required).

The PM250 Power Module features an absolutely unique technology – Efficient Infeed Technology. This feature provides the ability to feed energy back into the supply system in the generator mode (electronic braking) so that the energy is not converted into heat in a braking resistor. This saves space in the control cabinet. The time-consuming process of dimensioning the braking resistor and the expense of the extra wiring are eliminated. Furthermore, heat losses in the control cabinet are reduced.

Further, the innovative circuit design reduces the line harmonics. There is no need to use an optional line reactor at the supply infeed. This saves space and costs for engineering and procurement.

The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).

Frame sizes FSD to FSF of the PM250 Power Modules are available both with as well as without integrated line filter class A.

For frame size FSC of the PM250 Power Module with an integrated line filter class A, an additional base filter of class B is available for achieving class B (see section Line-side components).

The PM250 Power Module is also designed for safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM250 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.

Note:

Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.

集成

All Power Modules have the following connections and interfaces:

• PM?IF interface to connect the Power Module to the Control Unit. The Power Module also supplies power to the Control Unit using an integrated power supply
• Motor connection using screw-type terminals or screw studs
• 2 PE/protective conductor connections
• Shield connection plate

Connection example for PM240?2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter

Connection example for PM240?2 Power Modules, frame sizes FSD to FSG, with or without integrated line filter

Connection example for PM250 Power Modules with or without integrated line filter

Power and DC link components that are optionally available depending on the Power Module used?