ADSS/OPGW余纜架
名稱：余纜架 光纜金具 光纜熱鍍鋅預留架 桿用/塔用
又名：預留架，放線架
材質：Q235 扁鐵：a)50*5mmb) 40*4mm
用途：用于安放光纜接續時的富余光纜，一般設一個接頭盒，都配一個余纜架。余纜架分桿用和塔用兩種，如為桿用，則需要提供使用桿徑。
產品詳情
| 型號 | 固定部分長度L1（ mm） | 總長度（mm） | 重量（kg) | 備注 |
| PYLJ-1 | 400 | 1200 | 6 | 桿用 |
| PYLJ-2 | 400 | 1200 | 6 | 塔用 |
1.產品質量三包，對所有電力金具設備我公司均嚴格按照客戶所提供圖紙及技術要求（技術協議）并嚴格按照GB標準設計、生產和檢驗。
2.原材采購、設備設計、產品生產制造等過程中，嚴格按下列質量標準進行控制，確保每個工序處在質量受控狀態，從而保證產品質量。
中華人民共和國電力行業標準（DL/T763-2001）“架空線路用預絞絲金具技術條件”。
中華人民共和國電力行業標準（DL/758-2001）“接續金具”
中華人民共和國電力行業標準（DL/759-2001）”連接金具”
3.所有出廠產品均嚴格按檢驗程序進行檢驗，保證產品一次交檢合格率99%，成品抽查合格率99%。
4.對所有客戶均提供：技術更新、質量更好、服務更佳的產品.
金具的訂貨除按設計部門提供的金具型號、數量外，由于光纜金具與光纜技術參數配合要求嚴格，也就是說兩者要有很好的相容性，否則可能導致工程失敗。通常金具與纜應作配合性試驗后，才會有較高的可靠性。
ADSS / OPGW cable rack
Name: remaining cable rack, optical cable fittings, cable hot galvanizing, reserved rack pole / tower
Also known as: reserved rack, pay off rack
Material: Q235 flat iron: a) 50 * 5mmb) 40 * 4mm
Purpose: it is used to place the surplus optical cable when the optical cable is connected. Generally, it is equipped with a junction box and a surplus cable rack. There are two kinds of cable supports for poles and towers. If they are used for poles, the diameter of poles shall be provided.
product details
| model | Fixed part length L1（ mm） | Total length（mm） | weight（kg) | remarks |
| PYLJ-1 | 400 | 1200 | 6 | Pole |
| PYLJ-2 | 400 | 1200 | 6 | Tower |
1.Three guarantees of product quality. For all electric power fittings and equipment, our company designs, produces and tests in strict accordance with the drawings and technical requirements (technical agreement) provided by customers and in strict accordance with GB standards.
2. In the process of original procurement, equipment design and product manufacturing, the following quality standards shall be strictly followed to ensure that each process is under quality control, so as to ensure the product quality.
Electric power industry standard of the people's Republic of China (DL / t763-2001) "technical conditions of preformed wire fittings for overhead lines".
Electric power industry standard of the people's Republic of China (DL / 758-2001) "connecting fittings"
Power industry standard of the people's Republic of China (DL / 759-2001) "connecting fittings"
3. All ex factory products shall be inspected in strict accordance with the inspection procedures to ensure that the qualified rate of one-time inspection of products is 99%, and that of finished products is 99%.
4. Provide all customers with products with updated technology, better quality and better service
In addition to the model and quantity of fittings provided by the design department, the hardware fittings of optical cable and the technical parameters of optical cable shall be strictly matched, that is to say, they shall have good compatibility, otherwise the project may fail. Generally, the fitting and cable should be tested for compatibility before they have higher reliability.
