SCZ50-2D伸縮臂吊裝機
（escopic Crane Loader）
[ 產品簡介 Product Introduction ]
SCZ50-2D型伸縮臂吊裝機，底盤采用前輪驅動，后輪轉向，剛性懸掛；傳動采用前后各兩檔液力機械傳動變速箱，全液壓動力轉向，制動為氣推油鉗盤式制動；工作裝置為兩節四邊形伸縮臂和一個可旋轉吊臂組成。該機于進集裝箱石板材的吊裝作業，也可作為一般吊車使用，可廣泛適用于工廠、碼頭、貨場、林場、建材、倉庫、物流等行業，是一種適應性廣和效率高的裝卸機械。
The SCZ50-2D escopic Crane Loader works with front-wheel drive, rear-wheel steering, rigid suspension; adopt total four hydromechanical drive gear-boxes in the back and front as the transmission, hydraulic power steering, caliper disc brake; the working device is composed of two quadrilateral portable escopic arms and a rotary boom. It is specially used for lift on/off the stone slab container and it can also be used as a normal crane. It is widely available for the factory, dock, goods yard, forestry center, building materials industry, warehouse, logistics and so on. It is a handling machinery of wide application and high efficiency.
[ 主要技術參數 Specifications ]
| 額定起重量 Rated Load | 5000kg | |
| 載荷中心距（輪胎前沿距載荷中心） The Distance of Load Center（Tyre-fore to load center） | 3000mm | |
| 主鉤zui大起升高度（主吊鉤距地面） Max.Lifting Height of Main Hook（Main hook to ground） | 6250mm | |
| 主鉤zui大外伸距（水平）（輪胎前沿距主吊鉤） Max.Outspread of Main Hook（Horizontal）（Tyre-fore to main hook） | 2750mm | |
| zui大行駛速度 Max.Traveling Speed | 25km/h | |
| zui小離地間隙 Min.Ground Clearance | 365mm | |
| zui小轉彎半徑 Min.turning Radius | 6800mm | |
| 爬坡度 Grade Ability | ≥20% | |
| 傾翻角度上/下 The Angle of Lean Up/Down | 24°/22.5° | |
| 輪距 Tread | 1825mm | |
| 軸距 Wheel base | 2998mm | |
| 自重 Deadweight | 13000kg | |
| 整機外形尺寸（長×寬×高） Overall Dimension （L×W×H） | 5400mm×2200mm×2800mm | |
| 發動機（一拖東方紅） Engine （Yituo Dongfanghong） | 型號 Type | LR4108G76 |
| 額定功率 Rated power | 74kw | |
| 標定轉速 Rated speed | 2400r/min | |
| 排量 Exhaust | 4.6L | |
| 輪胎 Tyre | 前輪 Front wheel | 15.5-25（16PR） |
| 后輪 Rear wheel | 11.00-20（16PR） | |
注：由于技術改進，該數據可能與產品不符，如有誤則以產品為準。
Note:The content and performance will be revised and the products will be improve without notice.
