BD-OTU10G 是我公司推出的4路10G速率的業務接入和波長轉換板卡;該板卡接入4路1.25Gbit/s~11.3Gbit/s速率的業務,進行3R再生和波長轉換,輸出標準波長的DWDM或CWDM光信號,以便于接入合波板卡進行傳輸和分波板卡進行解波。該板卡適用于10G及以下速率的業務接入合分波進行傳輸。
功能示意圖
圖 2 BD-OTU10G功能示意圖
產品規格
表 1 產品規格
產品型號 | FT-27-BD-OTU10G |
基本功能 | 支持4路雙向1.25Gbit/s~11.3 Gbit/s業務接入和傳輸 支持8路單向1.25Gbit/s~11.3 Gbit/s業務接入和傳輸 |
接入業務類型 | STM-16/64,OC-48/192 GE, 10GE FC100/200/400/800/1200, FICON, ESCON CPRI 1/2/3/4/5/6/7 |
所占業務槽位 | 占用1槽位, 適用于ISAP161/261/561平臺 |
WDM技術 | 支持DWDM: C Band, 100GHz或50GHz 支持CWDM:1270nm~1610nm |
3R技術 | 支持3R功能:再放大(Re-amplifying), 再定時(Retiming),再整形( Re-shaping) |
網管功能 | 支持端口工作狀態監測:發送光功率、接收光功率、溫度等 支持工作速率自適應 |
接口 | 支持8個可插拔SFP/SFP+光模塊,LC/UPC |
典型功耗 | 20 W |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.