Knick A402N 電導率儀
Knick SE 655 PH電極
Knick 2405 CondI PH計
Knick P42000D3 replace Typ 7555A1 opt 00.100.156.179 Nr 1314315 隔離放大器
Knick OXY 3400-062 溶氧儀
Knick SE604 PH電極
Knick 911 Cond 溶氧儀
Knick P43000D2(±1A;±20mA) 隔離放大器
Knick P42000D3-0019 隔離放大器 流量計Knick A402N 電導率儀
Knick P42000D3 隔離放大器
Knick 911ph PH計
Knick P41156D1(±60mV;±20mA) 隔離放大器
Knick P41100D1-0106 隔離放大器
Knick P41100D1-0105 隔離放大器
Knick 911 pH PH計
Knick P41000D1-0001 隔離放大器
Knick P42000D3-0109 隔離放大器
Knick P41100D1 隔離放大器
Knick P41000D1-0002 隔離放大器
Knick 830 XR 編碼器
Knick P 41000 D1-0002\±30mV/0-10V 隔離放大器
Knick P 41000 D1-0002±30mV/0-10V 隔離放大器
Knick P41059D1 隔離放大器
Knick P41066D1 隔離放大器
Knick P41068D1 隔離放大器
Knick MK-CC 065 電導率儀
Knick P41056D1 隔離放大器
Knick P41078D1 隔離放大器
Knick 830XS1 編碼器
Knick P41000D1-0015 隔離放大器
Knick P27000F1-0219 隔離放大器
Knick P27000H1-S002 隔離放大器
Knick P41058D1 隔離放大器
Knick P27000H1-S001 隔離放大器
SerieS 80 f
High power to size ratio
Light weight
Easy to fit
Screw terminals for easy wirring 流量計Knick A402N 電導率儀
Dual power feature 450-800W
Independent fan circuit to aid climate cooling
Filter Assembly
Fixing - 35 mm DIN Clip
UL approved
THermoSTAT
for din-rAiL
NO/NC
Mechanical Thermostat
UL approved
fAn HeATerS wiTH
eLecTronic THermoSTAT
Heating capacity:
1200W - 1500W - 2000W
Heating element type:
PTC resistor, self regulating
Thermal protection:
Thermal cut out in case of fan failure
Alarm output:
Optional 2 screw terminals for alarm signal
1?
Serie ?0 f
High power to size ratio
Light weight 流量計Knick A402N 電導率儀
Easy to fit
Pre-wired
Independent fan circuit to
aid climate cooling
AnTicondenSATinG HeATerS
Dehumidification- and cabinet heat elements are
used for heating and drying of confined spaces,
where the risk of low temperature is present,
or for equalizing temperature fluctuations to avoid
formation of condensation in electric systems.
preHeATer for converTer SYSTem
Plug and play solution with build in control system
Main Voltage 440V or 690V
Controll supply 230V
Signal contact for safety trip
HYGroSTAT
10-90% RH
UL approved
THermoSTAT
0-60oC
20-80oC
UL approved
STripHeATer
High power
UL approved
nAcelle HeATinG
1?
Nacelle Heaters
The LS-N series of wall mounted fan heaters
represents the wall mounted version of the
new Portable Fan Heater LS-N series.
With the same innovative aesthetics of
rounded, smooth lines, and manufactured
with a robust structure in steel plate, the wall
mounted series consists of five models.
These new wall mounted models are
designed to be hung by means of an easy to
use support system that is incorporated into
the appliance.
They are swivel mounted to allow the air to
be directed both horizontally and vertically,
thus allowing optimum distribution of the air
flow to the areas required.
L&S is a business partner you can rely on. They represent the HAWE counterpart with a combination
of flexibility of a small or medium sized supplier and the professionalism of a big player.
HAWE is requiring a partner open minded for improvements and customized
solutions, still keeping short delivery times and L&S is able to fulfil the obligation.
Andreas Nocker. Key Account Manager, HAWE HyDRAULiK GmbH
“
”
wALL moUnTed fAn HeATerS
LS-N SERIES
The LS-N series af wall mounted fan heaters
represents the wall mounted version of the new
Portable Fan Heater LS-N series
3kW, 5kW
nAceLLe fAn HeATerS
Same size for alle models
Only one power supply cable
No cable for control voltage
Build in safety thermostat
6kW, 9kW
15
GeAr & oilTAnK HeATinG
immerSion HeATerS
Heating of: gearoil, hydraulic oil, glycol and water
Built in with Nippels or Flanges
Replacable Heating Element
Horizintally Mounting
Different Steel Qualities
Different Power and Voltage
Different insert length
Custom designed solutions
immerSion HeATerS
for SmALL oiLTAnKS
Built-in thermostat
Custom designed solutions
SUBmerGed HeATer
For small oiltanks and for retrofit solutions
Easy installation
Built-in thermostat
Custom designed solution
TAnK HeATer
for HYdrAULic oiL
Submerged heater
Compact design
Built-in thermostat
Cost effective
Custom designed solutions
Temperature at 15oC to 50oC
Retrofit solutions
Temperature Sensors
16
pT100 - cABLe SenSorS
2, 3 or 4-wire
Cable due to customer requirement
- Silicon
- PVC
- Steel braided
- Halogen free (option)
- IEC 751
Wherever temperatures are measured Lund
& Sorensen has acquired considerable
experience in temperature measurement
from numerous projects in many different
fields. We supply temperature sensors for
use with media that include air, gas, water
and oil.
You can then benefit from Lund &
Sorensen’s extensive knowledge about
sensors and their use, as well as our
professional assistance in choosing
the best possible design.
Temperature sensors are used in a lot of
different places in the wind turbine,
among other things for measurements in:
- bearings
- hydraulic systems
- gear oil
- control cabinet temperatures
TemperATUre SenSorS
View of possible executions
Class A and B sensors
DIN-head or connecter
17
TemperATUre
SenSorS pT100
With removable connector
2 or 3-wire
Process connection
due to customer requirement
IEC 751
TeMPerATure sensors
We appreciate L&S as a flexible and reliable partner. Several cold climate
projects were developed corporay. From the very first concept to the
final solution and after-sales service - L&S covers it all. As an experienced,
professional and customer-orientated company L&S convinced us
from the beginning. L&S is our first choice for cold climate applications.
Daniel Scharr. Dipl. ing. DEWiND inc.
“
”
cABLe SenSorS
Cable sensors provide flexibility for
measurement of temperature in areas
with normal pressure.
Cable sensors are produced as thermal,
resistance, or NTC-sensors and with or
without attachment solutions.
The choice of type of cable depends
on the environment where the cable
sensor is to be mounted.
18
sensors
preSSUre TrAnSmiTTerS
Used on the turbine for
- hydraulic system
- gearbox
- level measurement
- output 4-20mA
LeveL SwiTcHeS
- with stop ring
Custom design
LeveL SwiTcHeS
Stainless steel execution
Custom design
LeveL SwiTcHeS
- with thermostat
comBined preSSUre
TrAnSmiTTer And pT100
TemperATUre SenSor
Pressure transmitter type 3610 is a pressure
transmitter for measuring the oil level in wind
turbine gear-boxes.
Pressure transmitter type 3610 is a loop pow-
ered, configurable pressure transmitter meas-
uring gauge pressure by means of a ceramic,
capacitive sensor element securing excellent
accuracy and very low temperature drift.
conTAcTLeSS mAGneToSTricTive
LineAr poSiTion TrAnSdUcer
Model RK A
Absolute type transducer
Strokes from 50 to 4000 mm
Working temperature -30...+90?C
Flange for pressure up to 350 bar
or up to 700 bar
19
nAcelle
Where can Lund & Sorensen products be used
in the wind turbine?
conTroL pAneL
nAceLLe HeATer
LoAd reSiSTor
GeAr BoX
BLAde
HUB conTroLLer
HYdrAULic Uni
(Amps)
(`)
MF EF
630 50kA ? WM06N3PMP4.1(S)
POR POR
800 50kA ?WM08N3PMP4.1(S)
1000 50kA ?WM10N3PMP4.1(S)
1250 50kA ?WM12N3PMP4.1(S)
1600 50kA ?WM16N3PMP4.1(S)
2000 50kA ?WM20N3PMP4.1(S)
630 65kA ?WM06S3PMP4.1(S)
800 65kA ?WM08S3PMP4.1(S)
1000 65kA ?WM10S3PMP4.1(S)
1250 65kA ?WM12S3PMP4.1(S)
1600 65kA ?WM16S3PMP4.1(S)
2000 65kA ?WM20S3PMP4.1(S)
2500 65kA ?WM25S3PMP4.1(S)
3200 65kA ?WM30S3PMP4.1(S)
4000 65kA ?WM40S3PMP4.1(S)
Drawout 3 Pole
(Amps)
(`)
MDO EDO
630 50kA WM06N3PMP4.1(S) 142660 179960
800 50kA WM08N3PMP4.1(S) 143190 180480
1000 50kA WM10N3PMP4.1(S) 149420 185900
1250 50kA WM12N3PMP4.1(S) 176680 206720
1600 50kA WM16N3PMP4.1(S) 186200 221930
2000 50kA WM20N3PMP4.1(S) 219700 252640
630 65kA WM06S3PMP4.1(S)
POR POR
800 65kA WM08S3PMP4.1(S)
1000 65kA WM10S3PMP4.1(S)
1250 65kA WM12S3PMP4.1(S)
1600 65kA WM16S3PMP4.1(S)
2000 65kA WM20S3PMP4.1(S) 247030 271910
2500 65kA WM25S3PMP4.1(S) 300240 339050
3200 65kA ?WM30S3PMP4.1(S) 340570 342310
4000 65kA ?WM40S3PMP4.1(S) 442570 475960
Fixed 4 Pole
(Amps)
(`)
MF EF
630 50kA ? WM06N4PMP4.1(S)
POR POR
800 50kA ? WM08N4PMP4.1(S)
1000 50kA ? WM10N4PMP4.1(S)
1250 50kA ? WM12N4PMP4.1(S)
1600 50kA ? WM16N4PMP4.1(S)
2000 50kA ? WM20N4PMP4.1(S)
630 65kA ? WM06S4PMP4.1(S)
800 65kA ? WM08S4PMP4.1(S)
1000 65kA ? WM10S4PMP4.1(S)
1250 65kA ? WM12S4PMP4.1(S)
1600 65kA ? WM16S4PMP4.1(S)
2000 65kA ? WM20S4PMP4.1(S)
2500 65kA ? WM25S4PMP4.1(S)
3200 65kA ? WM30S4PMP4.1(S)
4000 65kA ? WM40S4PMP4.1(S)
Drawout 4 Pole
(Amps)
(`)
MDO EDO
630 50kA WM06N4PMP4.1(S) 177840 218900
800 50kA WM08N4PMP4.1(S) 178370 219420
1000 50kA WM10N4PMP4.1(S) 185880 227550
1250 50kA WM12N4PMP4.1(S) 220860 257020
1600 50kA WM16N4PMP4.1(S) 238920 277120
2000 50kA WM20N4PMP4.1(S) 284370 320240
630 65kA WM06S4PMP4.1(S)
POR POR
800 65kA WM08S4PMP4.1(S)
1000 65kA WM10S4PMP4.1(S)
1250 65kA WM12S4PMP4.1(S)
1600 65kA WM16S4PMP4.1(S)
2000 65kA WM20S4PMP4.1(S) 309940 355860
2500 65kA WM25S4PMP4.1(S) 364050 391520
3200 65kA ? WM30S4PMP4.1(S) 415900 425490
4000 65kA ? WM40S4PMP4.1(S) 540720 569460
Notes :
1) In TP ACB if Earth Fault facility is required, add price of Neutral CTs from item no. 2 on page 10.
2) If Under Voltage Release is required, add price of UVT Coil from item no. 3 on page 10.
3) While ordering an ACB, complete the catalogue by replacing '' with ACB type: MF - Manual Fixed, EF-Electrical Fixed,
MD-Manual Drawout, ED-Electrical Drawout
4) All configured ACBs are non stockable. For further details please contact nearest branch office.
5) ACBs with higher breaking capacities are also available on request.
6) ACB with other protection release are also available please refer item no. 1 page 10
# ACB with Vertical terminal optional with adaptor are available on request.
l Other options of terminals are available on request.
For ACB communication through RS 485 Port, please refer item no. 55 on page 19.
ACB WiNmaster
MRP w.e.f. 10 th June 2013
10
WiNmaster Air Circuit Breaker
Main Accessories For WiNmaster Air Circuit Breakers
(Please specify ACB & type while placing order)
1. Micro Processor- ACB Protection Release
Sl.
No.
Description
(`)
1.1
MicroProcessor Based Micropro 3.1
Release (LSIG, Thermal Memory,
Fault Indication)
WM-MicroPro 3.1
POR
1.2
MicroProcessor Based Micropro 4.1
Release (LSING, Thermal Memory,
ZSI, Communication RS 485 Port,
Current Metering)
WM-MicroPro 4.1
1.3
MicroProcessor Based Micropro 5.1
Release (LSING, Thermal Memory,
ZSI, Communication RS 485 Port,
Current Metering)
WM-MicroPro 5.1
1.4
MicroProcessor Based Micropro
6.1Release (LSING, Earth Leakage
Protection, Over and Under
Protection for Voltage / Frequency,
Voltage unbalance, ACB operation
cycle counter, ACB contact indica-
tion wear)
WM-MicroPro 6.1
1.5
MicroProcessor Based Micropro
7.1Release (all features as 6.1, har-
monic measures and protection)
WM-MicroPro 7.1
2. Single Phase Polyester Resin Cast CTs - In TP ACB, one
additional CT will be required if, Ground Fault Protection is selected.
Sl.
No.
Description Neutral CT
(`)
2.1 630/0.2A WM-CT-06-N
2250
2.2 800/0.2A WM-CT-08-N
2.3 1000/0.2A WM-CT-10-N
2370
2.4 1250/0.2A WM-CT-12-N
2.5 1600/0.2A WM-CT-16-N 2470
2.6 2000/0.2A WM-CT-20-N
3150
2.7 2500/0.2A WM-CT-25-N
2.8 3200/0.2A WM-CT-32-N 3940
2.9 4000/0.2A WM-CT-40-N 5620
3. Under Voltage Trip Device - consisting of UVT Coil & Control
device fitted in the ACB
Sl.
No.
Description
(`)
3.1
Compact UVT Coil Upto
630A-4000A
WM-AUH-V-AB- 5260
Sl.
No.
Description Neutral CT
(`)
4.3
Lifter with variable size Loader (for
all sizes of ACBs)
? Lifter 98540
4.4 Door Interlock DOOR-INT-AB 2270
Sl.
No.
Description
Suitable for ACB frame
size /
630A~4000A
(`)
4.5 OCR (Fault) Alarm Switch WM-ALA-AB
640
4.6
Trip Indication Switch (For manual
tripping only)
WM-TIS-AB
4.7 'Spring Charged' Indication Switch WM-SCIS-AB 845
4.8 Position Indication Switch WM-ALB-AB 2080
4.9 Mechanical Operation Counter WM-ASC-AB
1950
4.1 Key Lock (One lock + One key) WM-AKI-AB
4.11 Castle Key Lock WM-CKI-AB 4500
4.12
Key Interlock (Consisting of 3-Key
Locks with 2 Keys (same No.) fitted
on 3 ACBs)
WM-AKI-1-AB 4000
4.13
Key Interlock (Consisting of 2-Key
Locks with 1 Key (same No.) fitted
on 2 ACBs)
WM-AKI-2-AB 3040
4.14 MAL Insertion Preventor WM-MIP-AB 550
4. Shunt Trip and Closing Coil
Sl.
No.
Description
(`)
4.1 Shunt Trip 630A-4000A WM-AVH-S-AB-
2200
4.2 Closing Coil 630A-4000A WM-AVH-C-AB-
Code for Coils Voltage
Description
AC Control Voltage
DC Control Voltage
110V
220~240V 415~440V 24V 48V 110V 220V
UVT FA MA NA - - FD MD
SHUNT FA MA NA BD ED FD MD
Closing Coil FA MA NA BD ED FD MD
Please specify voltage while ordering
ACB WiNmaster
MRP w.e.f. 10 th June 2013
11
WiNmaster ACB Order Form
List Price w.e.f. 10 th April 2009
11
List Price w.e.f. 23 rd April 2012
11
RELEASES
CUSTOMER NAME ORDER NO. & DATE DELIVERY DATE
Notes : (1) Please refer catalogue / Price-List, for further details of Micropro Release.
(2) Neutral CT is required alongwith Microprocessor Release having Ground -Fault Protection. This has to be mounted on
Earth / Neutral Busbar of Panel.
QTY. (NOS.)
630 A 1000 A 1600 A 2500 A 4000 A
800 A 1250 A 2000 A 3200 A
3 POLE 4 POLE
AMBIENT TEMP.
OF ACB
REQUIRED
NO. OF
POLES
50 0 C
WITHOUT RELEASES
48 WAY AUX. ISOLATING CONTACT ASSLY.
POSITION INDICATION SWITCH
CLOSING COIL ______ V AC / ______ V DC
SHUNT TRIP COIL ______ V AC / ______ V DC
MOTOR 240V AC 220V DC
110V AC 110V DC
OPERATION MOUNTING
FIXED DRAWOUT
MANUAL ELECTRICAL
UNLESS & OTHERWISE SPECIFIED,
ALL SETTINGS OF RELEASES WOULD
BE SET AT MINIMUM VALUES.
POWER SUPPLY & RELAY MODULE
M.PRO 3.1 M.PRO 4.1
MICROPROCESSOR RELEASE
MAIN CT _____________ A, NEUTRAL CT _________ A,
SETTINGS : OVERLOAD ________ A, SHORT CIRCUIT _________ A,
GROUND FAULT _______ A INSTANTANEOUS _________ A,
NEUTRAL _________ A,
ACCESSORIES
SPECIAL REQUIREMENT/
ACCESSORIES (IF ANY)
2 ACBs
3 ACBs
AUX. SW. 4 NO + 4 NC AUX. SW. 6 NO + 6 NC
TRIP IND. SWITCH OCR ALARM SWITCH SPRING CHARGE IND. SWITCH
POSITION IND. SWITCH CASTLE KEYLOCK
KEY LOCK KEY INTERLOCK
UVT ________ V, CLOSE-OPEN CYCLE COUNTER
DOOR INTERLOCK
DC AC
END USER / PANEL BUILDER NAME & PHONE NO.
WINMASTER ACB ORDER FORM
M.PRO 5.1 M.PRO 6.1
COMMUNICATION MODULE
POWER SUPPLY MODULE
BATTERY UNIT
M.PRO 7.1
MRP w.e.f. 10 th June 2013
12
Air Circuit Breaker "AH" Series
(I) ACB with Inligent Release MicroPro 4.1
Features:
n LSING Protection n True RMS Sensing n Zone Selectivity
n LCD Display n Thermal Memory n Fault Indication
n Current Measurement n Communication through RS 485 Port
"AH" Series breakers fitted with standard accessories, tabulated below, are included in the Prices mentioned in the subsequent tables.
Manual Fixed (MF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e
5NO+5NC
- Main CTs for 3 Phase only
- Terminal Type - Horizontal
upto 2500A & Vertical for
3200A/4000A
- Power Supply Module
Electrical Fixed (EF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e. 5NO + 5NC
- Main CTs for 3 Phase only
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical
operation
- Terminal Type - Horizontal upto 2500A &
Vertical for 3200A/4000A
- Power Supply Module
Electrical Drawout (EDO)
- Microprocessor Release
- Auxiliary Switch 7a 7b i.e. 7 NO +7 NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating contacts
- AC/DC Charging Motor
- Closing Coil - Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical operation
- l Terminal Type - Horizontal upto 2500A & Vertical
for 3200A/4000A
- Power Supply Module
Manual Drawout (MDO)
- Microprocessor Release
- Auxiliary Switch 7a
7b i.e. 7NO + 7NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating
contacts
- l Terminal Type - Horizontal upto
2500A & Vertical for 3200A/4000A
- Power Supply Module
LT Air Circuit Breaker fitted with Inligent Release MicroPro 4.1
Fixed 3 Pole
(Amps)
(`)
MF EF
630 45kA ? AH06DCSMP4.1(S) 89050 120290
800 45kA ? AH08DCSMP4.1(S) 91850 129790
800 50kA ? AHA-08N3PMP4.1(S) 97120 135660
1000 50kA ? AHA-10N3PMP4.1(S) 97550 136080
1000 50kA ? AH10DCSMP4.1(S) POR POR
1250 50kA ? AH12DCSMP4.1(S) 125240 162860
1600 50kA ? AH16DCSMP4.1(S) 129010 172260
2000 50kA ? AHA-20N3PMP4.1(S) 144950 189110
2000 50kA ? AH20DCSMP4.1(S) POR POR
2500 50kA ? AH25DCSMP4.1(S) 163050 210400
2000 65kA ? AHA-20S3PMP4.1(S) 160030 207390
3200 65kA ? AH30DCSMP4.1(S) 241900 280940
4000 85kA ? AH40DCSMP4.1(S) 374820 407540
Drawout 3 Pole
(Amps)
(`)
MDO EDO
630 45kA AH06DCSMP4.1(S) 124720 165180
800 45kA AH08DCSMP4.1(S) 128840 166120
800 50kA AHA-08N3PMP4.1(S) 134340 171530
1000 50kA AHA-10N3PMP4.1(S) 139520 174440
1000 50kA AH10DCSMP4.1(S) POR POR
1250 50kA AH12DCSMP4.1(S) 168370 201200
1600 50kA AH16DCSMP4.1(S) 177030 212970
2000 50kA AHA-20N3PMP4.1(S) 208000 243590
2000 50kA AH20DCSMP4.1(S) POR POR
2500 50kA AH25DCSMP4.1(S) 244060 272640
2000 65kA AHA-20S3PMP4.1(S) 232530 270260
3200 65kA ? AHA-30S3PMP4.1(S) 306480 337060
3200 65kA ? AH30DCSMP4.1(S) POR POR
4000 65kA ? AHA-40S3PMP4.1(S) 400250 425220
4000 85kA ? AH40DCSMP4.1(S) 414980 444970
Fixed 4 Pole
(Amps)
(`)
MF EF
630 45kA ? AH06D4CSMP4.1(S) 108760 151130
800 45kA ? AH08D4CSMP4.1(S) 113390 157310
800 50kA ? AHA-08N4PMP4.1(S) 119200 163190
1000 50kA ? AHA-10N4PMP4.1(S) 122440 163610
1000 50kA ? AH10D4CSMP4.1(S) POR POR
1250 50kA ? AH12D4CSMP4.1(S) 155730 194770
1600 50kA ? AH16D4CSMP4.1(S) 161210 202020
2000 50kA ? AHA-20N4PMP4.1(S) 186850 230620
2000 50kA ? AH20D4CSMP4.1(S) POR POR
2500 50kA ? AH25D4CSMP4.1(S) 210010 257140
2000 65kA ? AHA-20S4PMP4.1(S) 206880 250810
3200 65kA ? AH30D4CSMP4.1(S) 298010 339470
4000 85kA ? AH40D4CSMP4.1(S) 442240 504460
Drawout 4 Pole
(Amps)
(`)
MDO EDO
630 45kA AH06D4CSMP4.1(S) 158960 200160
800 45kA AH08D4CSMP4.1(S) 163300 202770
800 50kA AHA-08N4PMP4.1 (S) 168790 208180
1000 50kA AHA-10N4PMP4.1 (S) 173440 212870
1000 50kA AH10D4CSMP4.1(S) POR POR
1250 50kA AH12D4CSMP4.1(S) 207250 243910
1600 50kA AH16D4CSMP4.1(S) 226380 260570
2000 50kA AHA-20N4PMP4.1 (S) 269700 304200
2000 50kA AH20D4CSMP4.1(S) POR POR
2500 50kA AH25D4CSMP4.1(S) 315220 343160
2000 65kA AHA-20S4PMP4.1(S) 302530 338050
3200 65kA ? AHA-30S4PMP4.1(S) 376780 404160
3200 65kA ? AH30D4CSMP4.1(S) POR POR
4000 65kA ? AHA-40S4PMP4.1(S ) 490200 511860
4000 85kA ? AH40D4CSMP4.1(S 508340 535820
Notes :
1) In TP ACB if Earth Fault facility is required, add price of Neutral CTs from item no. 4.1 on page 16.
2) If Under Voltage Release is required, add price of UVT Coil from item no. 7 on page 17.
3) Prices of ACBs 5000 & 6300A available on request.
4) While ordering an ACB, complete the catalogue by replacing '' with ACB type: MF-Manual Fixed, EF-Electrical Fixed, MD- Manual Drawout, ED-Electrical Drawout
5) All configured ACBs are non stockable. For further details please contact nearest branch office.
6) ACBs with higher breaking capacities are also available on request.
7) ACBs with vertical terminal are available in s 6D~16D/08N-20S(AHA) in drawout type only.
l ACB with Vertical terminal optional with adaptor are available on request.
For ACB communication through RS 485 Port, please refer item no. 55 on page 19.
ACB "AH" Series
MRP w.e.f. 10 th June 2013
13
Air Circuit Breaker "AH" Series
(II) ACB with Inligent Release MicroPro 3.1
Features:
n LSIG Protection n True RMS Sensing n Fault Indication
"AH" Series breakers fitted with standard accessories, tabulated below, are included in the Prices mentioned in the subsequent tables.
Manual Fixed (MF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e
5NO+5NC
- Main CTs for 3 Phase only
- Terminal Type - Horizontal
upto 2500A & Vertical for
3200A/4000A
- Power Supply Module
Electrical Fixed (EF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e. 5NO + 5NC
- Main CTs for 3 Phase only
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical
operation
- Terminal Type - Horizontal upto 2500A &
Vertical for 3200A/4000A
- Power Supply Module
Electrical Drawout (EDO)
- Microprocessor Release
- Auxiliary Switch 7a 7b i.e. 7 NO +7 NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating contacts
- AC/DC Charging Motor
- Closing Coil - Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical operation
- l Terminal Type - Horizontal upto 2500A & Vertical
for 3200A/4000A
- Power Supply Module
Manual Drawout (MDO)
- Microprocessor Release
- Auxiliary Switch 7a
7b i.e. 7NO + 7NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating
contacts
- l Terminal Type - Horizontal upto
2500A & Vertical for 3200A/4000A
- Power Supply Module
LT Air Circuit Breaker fitted with Inligent Release MicroPro 3.1
Fixed 3 Pole
(Amps)
(`)
MF EF
630 45kA ?AH-06DCSMP3.1(S) 65050 96290
800 45kA ?AH-08DCSMP3.1(S) 67850 105790
800 50kA ?AHA-08N3PMP3.1(S) 73120 111660
1000 50kA ?AHA-10N3PMP3.1(S) 73550 112080
1000 50kA ?AH-10DCSMP3.1(S) POR POR
1250 50kA ?AH-12DCSMP3.1(S) 101240 138860
1600 50kA ?AH-16DCSMP3.1(S) 105010 148260
2000 50kA ?AHA-20N3PMP3.1(S) 120950 165110
2000 50kA ?AH-20DCSMP3.1(S) POR POR
2500 50kA ?AH-25DCSMP3.1(S) 139050 186400
2000 65kA ?AHA-20S3PMP3.1(S) 136030 183390
3200 65kA ?AH-30DCSMP3.1(S) 217900 256940
4000 85kA ?AH-40DCSMP3.1(S) 350820 383540
Drawout 3 Pole
(Amps)
(`)
MDO EDO
630 45kA AH-06DCSMP3.1(S) 100720 141180
800 45kA AH-08DCSMP3.1(S) 104840 142120
800 50kA AHA-08N3PMP3.1(S) 110340 147530
1000 50kA AHA-10N3PMP3.1(S) 115520 150440
1000 50kA AH-10DCSMP3.1(S) POR POR
1250 50kA AH-12DCSMP3.1(S) 144370 177200
1600 50kA AH-16DCSMP3.1(S) 153030 188970
2000 50kA AHA-20N3PMP3.1(S) 184000 219590
2000 50kA AH20DCSMP3.1(S) POR POR
2500 50kA AH25DCSMP3.1(S) 220060 248640
2000 65kA AHA-20S3PMP3.1(S) 208530 246260
3200 65kA ? AHA-30S3PMP3.1(S) 282480 313060
3200 65kA ?AH30DCSMP3.1(S) POR POR
4000 65kA ? AHA-40S3PMP3.1(S) 376250 401220
4000 85kA ?AH40DCSMP3.1(S) 390980 420970
Fixed 4 Pole
(Amps)
(`)
MF EF
630 45kA ?AH06D4CSMP3.1(S) 84760 127130
800 45kA ?AH08D4CSMP3.1(S) 89390 133310
800 50kA ?AHA-08N4PMP3.1(S) 95200 139190
1000 50kA ?AHA-10N4PMP3.1(S) 98440 139610
1000 50kA ?AH10D4CSMP3.1(S) POR POR
1250 50kA ?AH12D4CSMP3.1(S) 131730 170770
1600 50kA ?AH16D4CSMP3.1(S) 137210 178020
2000 50kA ?AHA-20N4PMP3.1(S) 162850 206620
2000 50kA ?AH20D4CSMP3.1(S) POR POR
2500 50kA ?AH25D4CSMP3.1(S) 186010 233140
2000 65kA ?AHA-20S4PMP3.1(S) 182880 226810
3200 65kA ?AH30D4CSMP3.1(S) 274010 315470
4000 85kA ?AH40D4CSMP3.1(S) 418240 480460
Drawout 4 Pole
(Amps)
(`)
MDO EDO
630 45kA AH06D4CSMP3.1(S) 134960 176160
800 45kA AH08D4CSMP3.1(S) 139300 178770
800 50kA AHA-08N4PMP3.1 (S) 144790 184180
1000 50kA AHA-10N4PMP3.1 (S) 149440 188870
1000 50kA AH10D4CSMP3.1(S) POR POR
1250 50kA AH12D4CSMP3.1(S) 183250 219910
1600 50kA AH16D4CSMP3.1(S) 202300 236570
2000 50kA AHA-20N4PMP3.1 (S) 245700 280200
2000 50kA AH20D4CSMP3.1(S) POR POR
2500 50kA AH25D4CSMP3.1(S) 291220 319160
2000 65kA AHA-20S4PMP3.1(S) 278530 314050
3200 65kA ? AHA-30S4PMP3.1(S) 352780 411950
3200 65kA ?AH30D4CSMP3.1(S) POR POR
4000 65kA ?AHA-40S4PMP3.1(S) 466200 487860
4000 85kA ?AH40D4CSMP3.1(S) 484340 511820
Notes :
1) In TP ACB if Earth Fault facility is required, add price of Neutral CTs from item no. 4.1 on page 16.
2) If Under Voltage Release is required, add price of UVT Coil from item no. 7 on page 17.
3) Prices of ACBs 5000 & 6300A available on request.
4) While ordering an ACB, complete the catalogue by replacing '' with ACB type: MF-Manual Fixed, EF-Electrical Fixed, MD- Manual Drawout, ED-Electrical Drawout
5) All configured ACBs are non stockable. For further details please contact nearest branch office.
6) ACBs with higher breaking capacities are also available on request.
7) ACBs with vertical terminal are available in s 6D~16D/08N-20S(AHA) in drawout type only.
l ACB with Vertical terminal optional with adaptor are available on request.
MRP w.e.f. 10 th June 2013
14
Air Circuit Breaker "AH" Series
(III) ACB with Microprocessor Release μIT-100
n LSIG Protection n True RMS Sensing n Fault Indication
"AH" Series breakers fitted with standard accessories, tabulated below, are included in the Prices mentioned in the subsequent tables.
Manual Fixed (MF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e
5NO+5NC
- Main CTs for 3 Phase only
- Terminal Type - Horizontal
upto 2500A & Vertical for
3200A/4000A
Electrical Fixed (EF)
- Microprocessor Release
- Auxiliary Switch 5a 5b i.e. 5NO + 5NC
- Main CTs for 3 Phase only
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical
operation
- Terminal Type - Horizontal upto 2500A &
Vertical for 3200A/4000A
Electrical Drawout (EDO)
- Microprocessor Release
- Auxiliary Switch 7a 7b i.e. 7 NO +7 NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating contacts
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical operation
- l Terminal Type - Horizontal upto 2500A & Vertical
for 3200A/4000A
Manual Drawout (MDO)
- Microprocessor Release
- Auxiliary Switch 7a
7b i.e. 7NO + 7NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating
contacts
- l Terminal Type - Horizontal upto
2500A & Vertical for 3200A/4000A
LT Air Circuit Breaker fitted with Microprocessor Release type μIT-100 / μIT-G (Includes Rectifier Unit 220V AC / 24V DC type
ARO - 1B in standard supply)
Fixed 3 Pole
(Amps)
(`)
MF EF
630 45kA AH-6D-CS-MP- 69050 100290
800 45kA AH-8D-CS-MP- 71850 109790
800 50kA AHA-08N3PMP 77120 115660
1000 50kA AHA-10N3PMP 77550 116080
1000 50kA AH-10D-CS-MP- POR POR
1250 50kA AH-12D-CS-MP- 105240 142860
1600 50kA AH-16D-CS-MP- 109010 152260
2000 50kA AHA-20N3PMP 124950 169110
2000 50kA AH-20D-CS-MP- POR POR
2500 50kA AH-25D-CS-MP- 143050 190400
2000 65kA AHA-20S3PMP 140030 187390
3200 65kA ? AH-30D-CS-MP- 221900 260940
4000 85kA ? AH-40D-CS-MP- 354820 387540
Drawout 3 Pole
(Amps)
(`)
MDO EDO
630 45kA AH-6D-CS-MP- 104720 145180
800 45kA AH-8D-CS-MP- 108840 146120
800 50kA AHA-08N3PMP 114340 151530
1000 50kA AHA-10N3PMP 119520 154440
1000 50kA AH-10D-CS-MP- POR POR
1250 50kA AH-12D-CS-MP- 148370 181200
1600 50kA AH-16D-CS-MP- 157030 192970
2000 50kA AHA-20N3PMP 188000 223590
2000 50kA AH-20D-CS-MP- POR POR
2500 50kA AH-25D-CS-MP- 224060 252640
2000 65kA ? AHA-20S3PMP 212530 250260
3200 65kA ? AHA-30S3PMP 286480 317060
3200 65kA ? AH-30D-CS-MP- POR POR
4000 65kA ? AHA-40S3PMP 380250 405220
4000 85kA ? AH-40D-CS-MP 394980 424970
Fixed 4 Pole
(Amps)
(`)
MF EF
630 45kA AH-6D-4CS-MP- 88760 131130
800 45kA AH-8D-4CS-MP- 93390 137310
800 50kA AHA-08N4PMP 99200 143190
1000 50kA AHA-10N4PMP 102440 143610
1000 50kA AH-10D-4CS-MP- POR POR
1250 50kA AH-12D-4CS-MP- 135730 174770
1600 50kA AH-16D-4CS-MP- 141210 182020
2000 50kA AHA-20N4PMP 166850 210620
2000 50kA AH-20D-4CS-MP- POR POR
2500 50kA AH-25D4CS-MP- 190010 237140
2000 65kA AHA-20S4CSMP 186880 230810
3200 65kA ? AH-30D-4CS-MP- 278010 319470
4000 85kA ? AH-40D-4CS-MP- 422240 484460
Drawout 4 Pole
(Amps)
(`)
MDO EDO
630 45kA AH-6D-4CS-MP- 138960 180160
800 45kA AH-8D-4CS-MP- 143300 182770
800 50kA AHA-08N4PMP 148790 188180
1000 50kA AHA-10N4PMP 153440 192870
1000 50kA AH-10D-4CS-MP- POR POR
1250 50kA AH-12D-4CS-MP- 187250 223910
1600 50kA AH-16D-4CS-MP- 206380 240570
2000 50kA AHA-20N4PMP 249700 284200
2000 50kA AH-20D-4CS-MP- POR POR
2500 50kA AH-25D-4CS-MP- 295220 323160
2000 65kA AHA-20S4PMP 282530 318050
3200 65kA ? AHA-30S4PMP 356780 384160
3200 65kA ? AH-30D-4CS-MP- POR POR
4000 65kA ? AHA-40S4PMP 470200 491860
4000 85kA ? AH-40D-4CS-MP 488340 515820
Notes :
1) In TP ACB if Earth Fault facility is required, add price of Neutral CTs from item no. 4.2 on page 16
2) If Under Voltage Release is required, add price of UVT Coil from item no. 7 on page 17
3) Prices of ACBs 5000 & 6300A available on request.
4) While ordering an ACB, the complete catalogue by replacing '' with ACB type: MF-Manual Fixed, EF-Electrical Fixed, MD-Manual Drawout, ED-Electrical Drawout
5) All configured ACBs are non stockable. For further details please contact nearest branch office.
6) ACBs with higher breaking capacities are also available on request.
7) ACBs with vertical terminal are available in s 6D~16D/08N-20S(AHA) in drawout type only.
l ACB with Vertical terminal optional with adaptor are available on request.
ACB "AH" Series
MRP w.e.f. 10 th June 2013
15
Air Circuit Breaker "AH" Series
(IV) ACB with Thermal Magnetic Release
"AH" Series breakers fitted with standard accessories, tabulated below, are included in the Prices mentioned in the subsequent tables.
Manual Fixed (MF)
- Thermal Magnetic Release
- Auxiliary Switch 5a 5b i.e
5NO+5NC
- Main CTs for 3 Phase only
- Shunt Trip
- Terminal Type - Horizontal
upto 2500A & Vertical for
3200A/4000A
Electrical Fixed (EF)
- Thermal Magnetic Release
- Auxiliary Switch 5a 5b i.e 5NO+5NC
- Main CTs for 3 Phase only
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for electrical
operation
- Terminal Type - Horizontal upto 2500A &
Vertical for 3200A/4000A
Electrical Drawout (EDO)
- Thermal Magnetic Release
- Auxiliary Switch 5a 5b i.e 5NO+5NC
- Main CTs for 3 Phase only
- Safety Shutter
- 36 way Auxiliary Isolating contacts
- AC/DC Charging Motor
- Closing Coil
- Shunt Trip
- Anti-pumping Relay
- Micro Switches as required for operation
- l Terminal Type - Horizontal upto 2500A & Vertical
for 3200A/4000A
Manual Drawout (MDO)
- Thermal Magnetic Release
- Auxiliary Switch 5a 5b i.e
5NO+5NC
- Main CTs for 3 Phase only
- Shunt Trip
- Safety Shutter
- 24 way Auxiliary Isolating
contacts
- l Terminal Type - Horizontal upto
2500A & Vertical for 3200A/4000A
LT Air Circuit Breaker fitted with Thermal Magnetic Release and Standard Accessories, as applicable.
Fixed 3 Pole
(Amps)
(`)
MF EF
630 45kA AH-6D-CS-TM- 56550 91010
800 45kA AH-8D-CS-TM- 60540 95280
800 50kA AHA-08N3PTM 64630 101040
1000 50kA AHA-10N3PTM 66240 103600
1000 50kA AH-10D-CS-TM- POR POR
1250 50kA AH-12D-CS-TM- 92750 131130
1600 50kA AH-16D-CS-TM- 96410 142650
2000 50kA AHA-20N3PTM 112240 160780
2000 50kA AH-20D-CS-TM- POR POR
2500 50kA AH-25D-CS-TM- 126670 180960
2000 65kA AHA-20S3PTM 125810 180320
3200 65kA ? AH-30D-CS-TM- 210050 252470
4000 85kA ? AH-40D-CS-TM- 325300 367170
Drawout 3 Pole
(Amps)
(`)
MDO EDO
630 45kA AH-6D-CS-TM- 97160 132150
800 45kA AH-8D-CS-TM- 98220 133300
800 50kA AHA-08N3PTM 103740 138720
1000 50kA AHA-10N3PTM 107240 140480
1000 50kA AH-10D-CS-TM- POR POR
1250 50kA AH-12D-CS-TM- 134530 167350
1600 50kA AH-16D-CS-TM- 149480 185900
2000 50kA AHA-20N3PTM 179450 214220
2000 50kA AH-20D-CS-TM- POR POR
2500 50kA AH-25D-CS-TM- 208370 240150
2000 65kA AHA-20S3PTM 201650 239530
3200 65kA ? AHA-30S3PTM 268870 300030
3200 65kA ? AH-30D-CS-TM- POR POR
4000 65kA ? AHA-40S3PTM 359560 391360
4000 85kA ? AH-40D-CS-TM- 373430 410460
Fixed 4 Pole
(Amps)
(`)
MF EF
630 45kA AH-6D-4CS-TM- 77450 114800
800 45kA AH-8D-4CS-TM- 81440 118750
800 50kA AHA-08N4PTM 87350 124620
1000 50kA AHA-10N4PTM 88860 130060
1000 50kA AH-10D-4CS-TM- POR POR
1250 50kA AH-12D-4CS-TM- 121070 166980
1600 50kA AH-16D-4CS-TM- 127320 173600
2000 50kA AHA-20N4PTM 153490 192690
2000 50kA AH-20D-4CS-TM- POR POR
2500 50kA AH-25D-4CS-TM- 176440 216880
2000 65kA AHA-20S4PTM 172020 211080
3200 65kA ? AH-30D-4CS-TM- 262700 304250
4000 85kA ? AH-40D-4CS-TM- 385300 451230
Drawout 4 Pole
(Amps)
(`)
MDO EDO
630 45kA AH-6D-4CS-TM- 126790 168090
800 45kA AH-8D-4CS-TM- 127850 172460
800 50kA AHA-08N4PTM 133270 177770
1000 50kA AHA-10N4PTM 139630 181840
1000 50kA AH-10D-4CS-TM- POR POR
1250 50kA AH-12D-4CS-TM- 170850 213500
1600 50kA AH-16D-4CS-TM- 189540 229630
2000 50kA AHA-20N4PTM 234030 268890
2000 50kA AH-20D-4CS-TM- POR POR
2500 50kA AH-25D-4CS-TM- 281250 311070
2000 65kA AHA-20S4PTM 263210 301390
3200 65kA ? AHA-30S4PTM 338760 333900
3200 65kA ? AH-30D-4CS-TM- POR POR
4000 65kA ? AHA-40S4PTM 437980 467380
4000 85kA ? AH-40D-4CS-TM- 454940 490170
Notes :
1) While ordering an ACB without Over Current Release, Shunt trip & Main CTs, please deduct (`) 4500 for 630-1600A; (`) 6000 for 2000A; (`) 7000 for 2500 -
3200A & (`) 8000 for 4000A from the prices listed above. Shunt trip will be standard in electrical ACB without release as well.
2) In TP ACB if Earth Fault facility is required, add prices of Earth Fault Relay from item no. 2 on page 16
3) If Under Voltage Release is required, add price of UVT Coil from item no. 7 on page 17
4) Prices of ACBs 5000 & 6300A available on request.
5) While ordering an ACB, the complete catalogue by replacing '' with ACB type: MF-Manual Fixed, EF-Electrical Fixed, MD-Manual Drawout, ED-
Electrical Drawout
6) All configured ACBs are non stockable. For further details please contact nearest branch office.
7) ACBs with higher breaking capacities are also available on request.
8) ACBs with vertical terminal are available in s 6D~16D/08N-20S(AHA) in drawout type only.
l ACB with Vertical terminal optional with adaptor are available on request.
ACB "AH" Series
MRP w.e.f. 10 th June 2013
16
Air Circuit Breaker "AH" Series
"AH" Series breakers fitted with standard accessories, tabulated
below, are included in the Prices mentioned in the subsequent tables.
- Themal Magnetic Release
- Auxiliary Switch 1NO
- Main CTs for 3 Phase only
- Shunt Trip only with thermal release
Manual Fixed, 3 Pole with Microprocessor Release
(Amps)
(`) MF
630 ? AH-6B-CS-MP-
POR
800 ? AH-8B-CS-MP-
1000 ? AH-10B-CS-MP-
1250 ? AH-12B-CS-MP-
1600 ? AH-16B-CS-MP-
Manual Fixed, 3 Pole with Thermal Magnetic Release
(Amps)
(`) MF
630 ? AH-6B-CS-TM-
POR
800 ? AH-8B-CS-TM-
1000 ? AH-10B-CS-TM-
1250 ? AH-12B-CS-TM-
1600 ? AH-16B-CS-TM-
1. ACB Protection Release (Micro Processor / Thermal)
Sl.
No.
Description
(`)
1.1
Microprocessor release with L.T.D.,
S.T.D, Instantaneous, Ground Fault
& LED Indication
μIT - 100 28500
1.2
Microprocessor release with L.T.D.,
S.T.D. with LED Indication (for
Generator Protection)
μIT - G 27500
1.3 Thermal magnetic release CS-TOMCR 4500
2. Earth Fault Relay with NCT (For use with Thermal Magnetic
Release)
Sl.
No.
Description
(`)
2.1 For 6D-16D/08N-20S(AHA) EFR1 4620
2.2 For 20D-25D/30S(AHA) EFR2 5150
2.3 For 30D/40S(AHA) EFR3 5940
2.4 For 40D EFR4 6620
3. FRP Laminated Safety Shutter Assembly
Sl.
No.
Description
(`)
3.1
For 6D-16D/08N-20S(AHA) 3 Pole ASH-1 1790
For 6D-16D/08N-20S(AHA) 4 Pole ASH-1 (4P) 2320
3.2
For 20D-25D/30S(AHA) 3 Pole ASH-2 2050
For 20D-25D/30S(AHA) 4 Pole ASH-2 (4P) 2680
3.3
For 30D/40S(AHA) 3 Pole ASH-3 2790
For 30D/40S(AHA) 4 Pole ASH-3 (4P) 3990
3.4
For 40D 3 Pole ASH-4 3420
For 40D 4 Pole ASH-4 (4P) 4470
5. Auxiliary Isolating Contact Assembly (set of one contact block
on ACB side & two blocks on cradle side)
Sl.
No.
Description
Unit
Price (`)
5.1
12
way
6D-16D/08N-20S(AHA), 3P
6D-16D/08N-20S(AHA), 4P
20D-25D/30S(AHA), 3P
20D-25D/30S(AHA), 4P
30D-40D/40S(AHA), 3P
30D-40D/40S(AHA), 4P
AIH-12-1
AIH-12-1(4P)
AIH-12-2
AIH-12-2(4P)
AIH-12-3
AIH-12-3(4P)
3730
5.2
24
way
6D-16D/08N-20S(AHA), 3P
6D-16D/08N-20S(AHA), 4P
20D-25D/30S(AHA), 3P
20D-25D/30S(AHA), 4P
30D-40D/40S(AHA), 3P
30D-40D/40S(AHA), 4P
CS-AIH-24-1
CS-AIH-24-1(4P)
CS-AIH-24-2
CS-AIH-24-2(4P)
CS-AIH-24-3
CS-AIH-24-3(4P)
5590
5.3
36
way
6D-16D/08N-20S(AHA), 3P
6D-16D/08N-20S(AHA), 4P
20D-25D/30S(AHA), 3P
20D-25D/30S(AHA), 4P
30D-40D/40S(AHA), 3P
30D-40D/40S(AHA), 4P
CS-AIH-36-1
CS-AIH-36-1 4P)
CS-AIH-36-2
CS-AIH-36-2 (4P)
CS-AIH-36-3
CS-AIH-36-3 (4P)
7990
6. Auxiliary Switch
Sl.
No.
Description
Unit
Price (`)
6.1
5 way
(2NO+3NC)
6D-16D/08N-20S(AHA) AXH-2A3B-1
1050
20D-40D/30S-40S(AHA) AXH-2A3B-2
5 way
(3NO+2NC)
6D-16D/08N-20S(AHA) AXH-3A2B-1
20D-40D/30S-40S(AHA) AXH-3A2B-2
6.2
10 way
(5NO+5NC)
6D-16D/08N-20S(AHA)
CS-AXH-5A5B-1
1600
20D-40D/30S-40S(AHA) CS-AXH-5A5B-2
6.3
14 way
(7NO+7NC)
6D-16D/08N-20S(AHA) CS-AXH-7A7B-1
2630
20D-40D/30S-40S(AHA)
CS-AXH-7A7B-2
4.1 Single Phase Polyester Resin Cast CTs for D Series ACB for MicroPro
3.1, 4.1 & 5.1 Release - 1 CT per pole is required. In TP ACB, one additional
CT will be required if, Ground Fault Protection is selected.
Sl.
No.
Type
Descrip-
tion
Phase CT Neutral CT
(`)
4.1 6D 630/0.2A WMCT-064 ATBWM-060
2100
4.2 8D/08N(AHA) 800/0.2A WMCT-084 ATBWM-080
4.3 10D/10N(AHA) 1000/0.2A WMCT-104 ATBWM-110
2200 4.4 12D 1250/0.2A WMCT-124 ATBWM-120
4.5 16D 1600/0.2A WMCT-164 ATBWM-160
4.6 20N/20S(AHA) 2000/0.2A AHA-DO-WM-CT-20 ATBWM-220
2950 4.7 20D 2000/0.2A ATBWM-220 ATBWM-220
4.8 25D 2500/0.2A ATBWM-225 ATBWM-225
4.9 30S(AHA) 3200/0.2A AHA-WM-CT-30 ATBWM-332
3680
4.10 30D 3200/0.2A ATBWM-332 ATBWM-332
4.11 40S(AHA) 4000/0.2A AHA-WM-CT-40 ATBWM-440
5260
4.12 40D 4000/0.2A ATBWM-440 ATBWM-440
4.2 Single Phase Polyester Resin Cast CTs for D Series ACB for Thermal
& μIT-100 release- 1 CT per pole is required. In TP ACB, one additional CT will
be required if, Ground Fault Protection is selected.
Sl.
No.
Type Description Phase CT Neutral CT
(`)
4.2.1 6D 250/5A ATB-024 ATB-024
1950
4.2.2 6D 400/5A ATB-044 ATB-040
4.2.3 6D 630/5A ATB-064 ATB-060
4.2.4 8D/08N(AHA) 800/5A ATB-084 ATB-080
4.2.5 10D/10N(AHA) 1000/5A ATB-104 ATB-110 2050
4.2.6 12D 1250/5A ATB-134 ATB-120 1990
4.2.7 16D 1600/5A ATB-164 ATB-160 2320
4.2.8 20N/20S(AHA) 2000/5A ATB-DO-CT-20 ATB-220
2630
4.2.9 20D 2000/5A ATB-220 ATB-220
4.2.10 25D 2500/5A ATB-225 ATB-225 2950
4.2.11 30S(AHA) 3200/5A AHA-CT-30 ATB-332
3420
4.2.12 30D 3200/5A ATB-332 ATB-332
4.2.13 40S(AHA) 4000/5A AHA-CT-40 ATB-440
4890
4.2.14 40D 4000/5A ATB-440 ATB-440
Main Accessories For D-type Air Circuit Breakers
(Please specify ACB & type while placing order)
Note: Specify ACB s.
ACB "AH" Series
Auxiliary Switch with other combination is also available. See item No. 6
MRP w.e.f. 10 th June 2013
17
7. Under Voltage Trip Device (D Series ACB) consisting of UVT
Coil & Control device fitted in the ACB
Sl.
No.
Description
(`)
7.1
Compact UVT Coil
6D-16D/08N-20S(AHA)
CS-AUH-V-A-
3680
7.2 20D-40D/30S-40S(AHA) CS-AUH-V-B-
Sl.
No.
For Air Circuit Breaker
(`)
26
Lifter with variable size
Loader (for all sizes of ACBs)
? LIFTER 99570
27
Door Interlock
(6D-16D/20AHA)
DOOR-INT-1
2100
28
Door Interlock (20D-40D)/
(30AHA-40AHA)
DOOR-INT-2
29
Vertical Connection Copper
Adapter (6D~8D)&800A(AHA)
(2 per pole required)
? CUADPTR-VC (6D~8D) 4000
30
Vertical Connection Copper
Adapter (10D~12D) (2 per
pole required)
? CUADPTR-VC (10 D~12D) 4730
31
Vertical Connection Copper
Adapter (16D & 20AHA) (2
per pole required)
? CUADPTR-VC(16D) 5370
32
Vertical Connection Copper
Adapter (20D~25D) (2 per
pole required)
? CUADPTR-VC (20 D~25D) 10840
8. Shunt Trip and Closing Coil
Sl.
No.
Description
(`)
8.1
Shunt Trip
6D-16D/08N-20S(AHA)
CS-AVH-S-1-
2050
20D-40D/30S-40S(AHA) CS-AVH-S-2-
8.2
Closing Coil
6D-16D/08N-20S(AHA)
CS-AVH-C-1-
2050
20D-40D/30S-40S(AHA) CS-AVH-C-2-
Main Accessories For D-type Air Circuit Breakers
(Please specify ACB & type while placing orders)
Please specify voltage while ordering
Code for Coils Voltage
Description
AC Control Voltage
DC Control Voltage
110V
220~240V 415~440V 24V 48V 110V 220V
UVT FA MA NA - - FD MD
SHUNT FA MA NA BD ED FD MD
Closing Coil FA MA NA BD ED FD MD
Sl.
No.
Description
Suitable for ACB frame size /
6D-16D/
08N-20S(AHA)
(`)
20D-40D/
30S-40S(AHA)
(`)
9 OCR (Fault) Alarm Switch (for ACB with MicroProcessor release only) ALA-1
600
ALA-2
600
10 Trip Indication Switch (For manual and Fault tripping in ACB with TM release only) TIS -1 TIS-2
11 'Spring Charged' Indication Switch SCIS 790 SCIS 790
12 Position Indication Switch ALB-4P-1 1950 ALB-IP-2 1950
13 Mechanical operation counter ASC-1 1810 ASC-2 1810
14 Key Lock (One lock + One key) AK1-1D 1370 AKI-2D 1370
15 Castle Key Lock CKI-1 4200 CKI-2 4200
16 Key Interlock (Consisting of 3-Key Locks with 2 Keys (same No.) fitted on 3 ACBs) AKI-1-1 3730 AKI-1-2 3730
17 Key Interlock (Consisting of 2-Key Locks with 1 Key (same No.) fitted on 2 ACBs) AKI-2-1 2840 AKI-2-2 2840
18 Short Circuit Contact for Shunting Auxiliary Isolating Contacts when ACB withdrawn SCC 330 SCC 330
19
Rectifier Unit 240V AC / 24V DC, used for LED Indication or for function checking of
Microprocessor Release (Can Control Upto 5 no. of ACBs)
CS-ARO-1BMA
1950
CS-ARO-1BMA
1950
20
Rectifier Unit 415V AC / 24V DC, used for LED Indication or for function checking of
Microprocessor Release (Can Control Upto 5 no. of ACBs)
CS-ARO-1BNA CS-ARO-1BNA
21 Mal Insertion Preventor MIP6D-16D 480 MIP20-25D 480
Sl.
No.
Description
Suitable for ACB frame size /
6D-16D/
08N-20S(AHA)
(`)
20C-25C
(`)
21 Making Current Release / Instantaneous Trip CS-MCR-1 6420 CS-MCR-2 7620
22 Mechanical Interlock (Fixed Vertical) MIL-16D-VF
7150
MIL-20D-VF
7150
23 Mechanical Interlock (Fixed Horizontal) MIL-16D-HF MIL-20D-HF
24 Mechanical Interlock (D/o Vertical) MIL-16D-VDO
10100
MIL-20D-VDO
10100
25 Mechanical Interlock (D/o Horizontal) MIL-16D-HDO MIL-20D-HDO
S. No. 22, 23, 24 & 25 will be supplied only factory fitted. These can not be fitted at site thus always order with ACB only.
Accessories - ACB
MRP w.e.f. 10 th June 2013
18
33. Drawout Mould Base (Cradle Side)
For ACB
Qty. Required
Per Pole
(`)
6D-16D/08N-20S(AHA) ? DRMOULD-20S 2
1500
20D ? DRMOULD-20D 2
25D/30S(AHA) ? DRMOULD-25D 2 2120
30D/40S(AHA) ? DRMOULD-30D 1 4680
40D ? DRMOULD-40D 1 5370
36. Main Fixed Contacts (Upper Terminals)
For ACB
Qty. Required
Per Pole
(`)
6D-8D FIXCONT-06D-08D 1 5730
08N-10N(AHA) FIXCONT-08N 1 5890
10D-12D FIXCONT-10D-12D 1 6050
16D FIXCONT-16D 1 6200
20N(AHA)-Fn FIXCONT-20N 1
7790 20N(AHA)-DOn/20S(AHA) FIXCONT-20S 1
20D FIXCONT-20D 1
25D/30S(AHA) FIXCONT-25D 1 10580
30D/40S(AHA) FIXCONT-30D 1 24560
40D FIXCONT-40D 1 30870
37. Lower Terminals with fitting plates
For ACB
Qty. Required
Per Pole
(`)
6D-8D/08N-10N(AHA) LWR-TRNL-8B-8D 1 6200
10D-12D LWR-TRNL-12B-12D 1 6790
16D LWR-TRNL-16B-16D 1 7520
20N(AHA)-Fn LWR-TRNL-20N 1
9470 20N(AHA)-DOn/20S(AHA) LWR-TRNL-20S 1
20D LWR-TRNL-20C-20D 1
25D/30S(AHA) LWR-TRNL-25C-25D 1 9940
30D/40S(AHA) LWR-TRNL-30C-30D 1 18720
40D LWR-TRNL-40C-40D 1 25660
38. Circuit Terminals / Drawout Terminals
For ACB
Qty. Required
Per Pole
(`)
6D-8D/08N-10N(AHA) CKTTML-08N 2 3790
10D-12D CKTTML-12D 2 5620
16D CKTTML-16D 2
9020
20N(AHA)-Fn CKTTML-20N 2
20N(AHA)-DOn/20S(AHA) CKTTML-20S 2
20D CKTTML-20D 2
25D/30S(AHA) CKTTML-25D 2 13250
30D/40S(AHA) CKTTML-30D 2 26230
40D CKTTML-40D 2 33180
39. Main Moving Contacts Assembly
For ACB
Qty. Required
Per Pole
(`)
6D-8D MOVMAIN-06D-08D 1 4200
08N-10N(AHA) MOVMAIN-08N 1 4420
10D-20D MOVMAIN-10D-12D 1 4520
16D MOVMAIN-16D 1 6570
20N(AHA)-Fn MOVMAIN-20N 1 7300
20N(AHA)-DOn/20S(AHA) MOVMAIN-20S 1 8090
20D MOVMAIN-20D 1 8740
25D/30S(AHA) MOVMAIN-25D 1 11460
30D/40S(AHA) MOVMAIN-30D 1 26230
40D MOVMAIN-40D 1 35130
35. Main Isolating Contacts (Jaw Contacts)
For ACB
Qty. Required
Per Pole
(`)
6D-8D/08N(AHA) MIC-08D 2 6200
10D/10N(AHA) MIC-10D 2 6520
12D MIC-12D 2
6940
16D MIC-16D 2
20N(AHA)-Fn MIC-20N 2 8510
20N(AHA)-DOn/20S(AHA) MIC-20S 2
18040
20D MIC-20D 2
25D/30S(AHA) MIC-25D 2 18930
30D/40S(AHA) MIC-30D 2 26760
40D MIC-40D 2 28710
34. Arcing Contacts (Set of 1 no. fixed & 1 no. moving)
For ACB
Qty. Required
Per Pole
(`)
6D-8D/08N(AHA) ARCCONT-08D 1M / 1F 3790
10D/10N(AHA) ARCCONT-10D 1M / 1F
4100
12D ARCCONT-12D 1M / 1F
16D ARCCONT-16D 1M / 1F 4840
20N(AHA)-Fn ARCCONT-20N 1M / 1F
6050 20N(AHA)-DOn/20S(AHA) ARCCONT-20S 1M / 1F
20D ARCCONT-20D 1M / 1F
25D/30S(AHA) ARCCONT-25D 1M / 1F 8390
30D/40S(AHA) ARCCONT-30D 1M / 1F 9470
40D ARCCONT-40D 1M / 1F 12360
Spares For D-type Air Circuit Breakers
(Please specify ACB & type while placing order for spares)
Moving Arcing
Contact
Main Moving
Contact Assembly
Lower
Terminal Assembly
Circuit
(Drawout) Terminals
Drawout
Mould Base
Main Isolating Contacts
(Jaw Contacts)
Fixed Arcing Contact
Main Fixed Contact
(Upper Terminals)
1) Items for Drawout ACB.
2) Horizontal arrangement (as shown)
upto 2500A & vertical for higher .
Note: M - Moving, F - Fixed
nF-Fixed Type, DO-Drawout Type
"" To arrive at total quantity per ACB, multiply by 3 or 4 depending upon
number of poles in the ACB.
Spares - ACB
MRP w.e.f. 10 th June 2013
19
40. Complete Pole Unit (Common for 3 & 4 Pole ACBs)
Sl.
No.
For Air Circuit Breaker
(`)
40.1 Single Pole unit for 6D CONDUNIT-6D 11460
40.2 Single Pole unit for 8D CONDUNIT-8D 12620
40.3 Single Pole unit for 08N-10N(AHA) CONDUNIT-8N 13140
40.4 Single Pole unit for 10D CONDUNIT-10D 13720
40.5 Single Pole unit for 12D CONDUNIT-12D 16140
40.6 Single Pole unit for 16D CONDUNIT-16D 18660
40.7 Single Pole unit for 20N(AHA)-Fn CONDUNIT-20N
20610
40.8
Single Pole unit for
20N(AHA)-DOn/20S(AHA)
CONDUNIT-20S
40.9 Single Pole Unit for 20D CONDUNIT-20D 25180
40.1 Single Pole Unit for 25D/30S(AHA) CONDUNIT-25D 27310
40.11 Single Pole Unit for 30D/40S(AHA) CONDUNIT-30D 54710
40.12 Single Pole Unit for 40D CONDUNIT-40D 65160
Other Spares
Sl.
No.
Description
(`)
43
New Style Micro Switch for
Motor cut off
6D-40D/08N-40S(AHA)
MICROSW 890
44
Anti Pumping Relay
6D-16D/08N-20S(AHA), 3P
6D-16D/08N-20S(AHA), 4P
CS-ANTPUMPRLY-1
CS-ANTPUMPRLY-1(4P)
3050
20D-25D/30S(AHA), 3P
20D-25D/30S(AHA), 4P
CS-ANTPUMPRLY-2
CS-ANTPUMPRLY-2 (4P)
3570
30D-40D/40S(AHA), 3P
30D-40D/40S(AHA), 4P
CS-ANTPUMPRLY-3
CS-ANTPUMPRLY-3(4P)
4100
45
Manual Charging Handle
6D-16D/08N-20S(AHA)
MCLHND-6D-16D 2420
46
Manual Charging Handle
20D-40D/30S-40S(AHA)
MCLHND-20D-40D 2630
47
Drawout Handle
6D-16D/08N-20S(AHA)
DRHND-6D-16D 2000
48
Drawout Handle
20D-40D/30S-40S(AHA)
DRHND-20D-40D 2420
49
Magnet Hold Trigger
6D-16D/08N-20S(AHA), 3P
6D-16D/08N-20S(AHA), 4P
MHT-16D-3P
MHT-16D-4P
2630
3100
50
Magnet Hold Trigger
20D-25D/30S(AHA), 3P
MHT-20D-25D3P 3420
Magnet Hold Trigger
20D-25D/30S(AHA), 4P
MHT-20D-25D4P 3890
51
Magnet Hold Trigger
30D-40D/40S(AHA), 3P
MHT-30D-40D3P 3520
Magnet Hold Trigger
30D-40D/40S(AHA), 4P
MHT-30D-40D4P 4000
52
D/O escopic Rail (L)
6D-16D/08N-20S(AHA)
20D-25D/30S(AHA)
30D-40D/40S(AHA)
DRTLRAIL (L) - 1
DRTLRAIL (L)-2
DRTLRAIL (L)-3
950
53
D/O escopic Rail (R)
6D-16D/08N-20S(AHA)
20D-25D/30S(AHA)
30D-40D/40S(AHA)
DRTLRAIL (R)- 1
DRTLRAIL (R)-2
DRTLRAIL (R)-3
950
54 Auxiliary Isolating Contact Blocks
Description
(`)
Breaker & Cradle Side 12 Way AIH-BC
3680
55 Communication Module
Description
(`)
Communication Module for Micropro 4.1
& 5.1 Release
CSPSCM-MICROPRO
POR
Power Supply Module CSPSM-MICROPRO
Power Supply & Relay Module MicroPro
4.1 & 5.1 Release
CSPSRM-MICROPRO
Battery Module for MicroPro 4.1 & 5.1
Release
CS-MPBU4.1.1
Voltage Code for Antipumping Relay
24/30V 48V 110V 220V 415V
AC -- -- FA MA NA
DC BD ED FD MD -
Spares For D-Type Air Circuit Breakers
(Please specify ACB & type while placing order for spares)
Pole Unit
Arc Chutes
41. Arc Chutes
For ACB
Qty. Required
Per Pole
(`)
6D-16D/08N-20N(AHA) ARCCHT-06D-16D 1 2500
20S(AHA) ARCCHT-20S 1
3240
20D ARCCHT-20D 1
25D/30S(AHA) ARCCHT-25D 1 3790
30D/40S(AHA) ARCCHT-30D 1 8200
40D ARCCHT-40D 1 8790
42. Charging Motors (110V ac/dc) or (220V AC/DC)
For ACB
(`)
6D-16D/08N-20S(AHA) AMH-1 18350
20D-40D/30S-40S(AHA) AMH-2 23930
"" To arrive at total quantity per ACB, multiply by 3 or 4 depending upon
number of poles in the ACB.
Note: "" New developed Microswitch
"" Please specify ACB & type while ordering for spares.
Auxiliary Isolating Contact Blocks has to be order together for Cradle
& Breaker side.
Spares - ACB
nF-Fixed Type, DO-Drawout Type
MRP w.e.f. 10 th June 2013
20
AH / AHA ACB ORDER FORM
List Price w.e.f. 10 th April 2009
19
List Price w.e.f. 23 rd April 2012
19
AH/AHA ACB ORDER FORM
RELEASES
Please fill seperate sheet for each type of ACB. Tick ? the box in front of each appropriate item and fill in the blanks.
CUSTOMER NAME ORDER NO. & DATE DELIVERY DATE
Notes : (1) Please refer catalogue / Price-List, for further details of μIT - 100 / μIT - G Releases.
(2) Neutral CT is required alongwith Microprocessor Release having Ground -Fault Protection. This has to be mounted on
Earth / Neutral Busbar of Panel.
QTY. (NOS.)
630 A 1000 A 1600 A 2500 A 4000 A 6300 A
800 A 1250 A 2000 A 3200 A 5000 A
3 POLE 4 POLE
AMBIENT TEMP.
OF ACB
REQUIRED
NO. OF
POLES
40 0 C 50 0 C
WITHOUT RELEASES
12/24/36 WAY AUX. ISOLATING CONTACT ASSLY.
POSITION INDICATION SWITCH
SHORT CIRCUIT CONTACTS ______ NOS / ACB
CLOSING COIL ______ V AC / ______ V DC
SHUNT TRIP COIL ______ V AC / ______ V DC
MOTOR 240V AC 220V DC
110V AC 110V DC
OPERATION MOUNTING
FIXED DRAWOUT
MANUAL ELECTRICAL
UNLESS & OTHERWISE SPECIFIED,
ALL SETTINGS OF RELEASES WOULD
BE SET AT MINIMUM VALUES.
μIT-100 μIT-G
MICROPROCESSOR
RELEASE
THERMAL MAGNETIC
EARTHFAULT REQD. NOT REQD.
SHUNT TRIP ______ V AC/ ______ V DC
(220V AC SHUNT TRIP IS PROVIDED AS STANDARD)
REQUIRED MAIN CT _________ A
SETTING OF NON-ADJ. MAG. INST. TRIP _________ KA
MAIN CT _____________ A, NEUTRAL CT _________ A,
SETTINGS : OVERLOAD ________ A, SHORT CIRCUIT _________ A,
GROUND FAULT _______ A, INSTANTANEOUS _________ A
ACCESSORIES
SPECIAL REQUIREMENT/
ACCESSORIES (IF ANY)
2 ACBs
3 ACBs
AUX. SW. 3 NO + 2 NC AUX. SW. 5 NO + 5 NC AUX. SW. 7 NO + 7 NC
TRIP IND. SWITCH OCR ALARM SWITCH SPRING CHARGE IND. SWITCH
POSITION IND. SWITCH CASTLE KEYLOCK
KEY LOCK KEY INTERLOCK
UVT. ________ V, CLOSE-OPEN CYCLE COUNTER
MECHANICAL INTERLOCK
DOOR INTERLOCK
HOR. VER.
DC AC
END USER / PANEL BUILDER NAME & PHONE NO.
Pro 4.1 Pro 5.1
POWER SUPPLY & RELAY MODULE
COMMUNICATION MODULE
POWER SUPPLY MODULE
BATTERY UNIT
MRP w.e.f. 10 th June 2013
21
CyLINDRICAL CAPACITOR RECTANGULAR CAPACITOR
Normal Duty
kVar
Rated
Voltage
LP / kVar
(`)
1.0 ? CSPND0001440 440 V 271 271
2.0 ? CSPND0002440 440 V 271 542
3.0 ? CSPND0003440 440 V 271 813
4.0 ? CSPND0004440 440 V 271 1084
5.0 CSPND0005440 440 V 147 735
7.5 CSPND0075440 440 V 147 1103
10.0 CSPND0010440 440 V 147 1470
12.5 CSPND0125440 440 V 147 1838
15.0 CSPND0015440 440 V 147 2205
20.0 CSPND0020440 440 V 147 2940
25.0 CSPND0025440 440 V 147 3675
Normal Duty
kVar
Rated
Voltage
LP / kVar
(`)
1.0 ? CSSND0001440 440 V 276 276
2.0 ? CSSND0002440 440 V 276 552
3.0 ? CSSND0003440 440 V 276 828
4.0 ? CSSND0004440 440 V 276 1104
5.0 CSSND0005440 440 V 179 895
7.5 CSSND0075440 440 V 179 1343
10.0 CSSND0010440 440 V 174 1740
12.5 CSSND0125440 440 V 174 2175
15.0 CSSND0015440 440 V 174 2610
20.0 CSSND0020440 440 V 168 3360
25.0 CSSND0025440 440 V 168 4200
50.0 CSSND0050440 440 V 168 8400
Extra Heavy Duty
kVar
Rated
Voltage
LP / kVar
(`)
1.0 ? CSEHD0001440 440 V 310 310
2.0 ? CSEHD0002440 440 V 310 620
3.0 ? CSEHD0003440 440 V 310 930
4.0 ? CSEHD0004440 440 V 310 1240
5.0 CSEHD0005440 440 V 256 1280
7.5 CSEHD0075440 440 V 256 1920
10.0 CSEHD0010440 440 V 246 2460
12.5 CSEHD0125440 440 V 246 3075
15.0 CSEHD0015440 440 V 246 3690
20.0 CSEHD0020440 440 V 246 4920
25.0 CSEHD0025440 440 V 246 6150
50.0 CSEHD0050440 440 V 246 12300
Super Heavy Duty
kVar
Rated
Voltage
LP / kVar
(`)
1.0 ? CSSHD0001440 440 V 391 391
2.0 ? CSSHD0002440 440 V 391 782
3.0 ? CSSHD0003440 440 V 391 1173
4.0 ? CSSHD0004440 440 V 391 1564
5.0 CSSHD0005440 440 V 342 1710
7.5 CSSHD0075440 440 V 342 2565
10.0 CSSHD0010440 440 V 337 3370
12.5 CSSHD0125440 440 V 337 4213
15.0 CSSHD0015440 440 V 337 5055
20.0 CSSHD0020440 440 V 337 6740
25.0 CSSHD0025440 440 V 337 8425
50.0 CSSHD0050440 440 V 337 16850
Heavy Duty
kVar
Rated
Voltage
LP / kVar
(`)
1.0 ? CSPHD0001440 440 V 285 285
2.0 ? CSPHD0002440 440 V 285 570
3.0 ? CSPHD0003440 440 V 285 855
4.0 ? CSPHD0004440 440 V 285 1140
5.0 CSPHD0005440 440 V 239 1195
7.5 CSPHD0075440 440 V 239 1793
10.0 CSPHD0010440 440 V 239 2390
12.5 CSPHD0125440 440 V 239 2988
15.0 CSPHD0015440 440 V 239 3585
20.0 CSPHD0020440 440 V 239 4780
25.0 CSPHD0025440 440 V 239 5975
? Non Stockable item
Note:
Capacitors are also available in 415/480/525V. For further details please contact
nearest branch office.
Capacitor
World Class Manufacturing Faclities
MRP w.e.f. 10 th June 2013
23
MRP w.e.f. 10 th June 2013
24
MRP w.e.f. 10 th June 2013
25
MRP w.e.f. 10 th June 2013
26
MRP w.e.f. 10 th June 2013
27
Moulded Case Circuit Breakers
(Standard Packing includes insulating phase barrier and Hardware)
l Positive isolation l Trip free mechanism
Range 5A -1200A, 690V
Ics=* Icu
Rated Current (Amps)
2 Pole
MRP
(`)
3 Pole
MRP
(`)
4 Pole
MRP
(`)
14kA 15, 20, 30, 40, 50 CSC1N2 2350 CSC1N3 2650 CSC1N4 3260
18kA
15, 20, 30, 40, 50 CSC1S2 2490 CSC1S3 3320 CSC1S4 4660
60, 75, 100 CSC2N2 2490 CSC2N3 3320 CSC2N4 4660
26kA
100 l CSC4N2
POR
CSC4N3
POR
CSC4N4
POR
125 l CSC4N2 CSC4N3 CSC4N4
150, 175 CSC4N2 6420 CSC4N3 8180 CSC4N4 10350
200 CSC4N2 8490 CSC4N3 9320 CSC4N4 12420
250 CSC4N2 11890 CSC4N3 13460 CSC4N4 17090
37kA
15, 20, 30, 40, 50, 60 CSC3S2 3540 CSC3S3 4425 CSC3S4 5625
75, 100 CSC3S2 3540 CSC3S3 4425 CSC3S4 5625
125 CSC3S2 3620 CSC3S3 4500 CSC3S4 5700
150, 175 - CSC4S3 9210 CSC4S4 11900
200 - CSC4S3 10350 CSC4S4 13970
250 - CSC4S3 13770 CSC4S4 17610
300 n - CSC5N3 21180 CSC5N4 26070
350, 400 n - CSC5N3 28820 CSC5N4 28240
500, 630 - CSC6N3 25050 CSC6N4 32610
700, 800 - CSC6N3 32100 CSC6N4 41410
50kA
15, 20, 30, 40, 50, 60 - CSC3H3 7250 CSC3H4 9730
75, 100 - CSC3H3 7350 CSC3H4 9830
125 - CSC3H3 9320 CSC3H4 12420
150, 175 - CSC4H3 12420 CSC4H4 16560
200 - CSC4H3 15010 CSC4H4 20190
250 - CSC4H3 19160 CSC4H4 24850
300 n - CSC5S3 21720 CSC5S4 28240
350, 400 n - CSC5S3 24440 CSC5S4 31500
65kA
250, 300 n - CSC5H3 23680 CSC5H4 30960
350, 400 n - CSC5H3 24210 CSC5H4 31500
500, 630 - CSC6S3 27440 CSC6S4 35720
700, 800 - CSC6S3 35720 CSC6S4 47620
1000 - l CSC7S3
POR
l CSC7S4
POR
1200 - l CSC8S3
l CSC8S4
85kA
250, 300 n - CSC5L3 26070 CSC5L4 34750
350, 400 n - CSC5L3 29330 CSC5L4 39100
500, 630 - CSC6L3 33130 CSC6L4 43480
700, 800 - CSC6L3 49690 CSC6L4 63160
1000 - l CSC7L3
POR
l CSC7L4
POR
1200 - l CSC8L3
l CSC8L4
Notes :
1. While Ordering, Replace "" by Rated Current required.
2. n Extended Terminals are included
3. For technical details please refer product catalogue
4. lFor availability & price please contact nearest branch office
MCCB
MRP w.e.f. 10 th June 2013
28
Moulded Case Circuit Breakers
Accessories for MCCBs
Suitable for use on New WB MCCBs Shunt Trip
MRP
(`)
Under
Voltage Trip
MRP
(`)
Auxiliary
Switch
MRP
(`)
Alarm
Switch
MRP
(`)
CSC1N2, CSC1S2 n STC-(...V)
1150
UVTC-(...V)
1360
AXWC-T
780
ALWC-T
780
CSC1N3, CSC1S3, CSC1N4, CSC1S4 STC-(...V) UVTC-(...V) AXWC- ALWC-
CSC2N2 n STC-(...V) UVTC-(...V) AXWC-T ALWC-T
CSC2N3, CSC2N4 STC-(...V) UVTC-(...V) AXWC- ALWC-
CSC3S3, CSC3S4, CSC3H3, CSC3H4 STC-(...V) UVTC-(...V) AXWC- ALWC-
CSC4N2 n STC-(...V) UVTC-(...V) AXWC-T ALWC-T
CSC4N3, CSC4N4, CSC4S3, CSC4S4 , CSC4H3, CSC4H4 STC-(...V) UVTC-(...V) AXWC- ALWC-
CSC5N3, CSC5N4, CSC5S3, CSC5S4, CSC5L3, CSC5L4 ST-6A(...V)
1545
UVT-6A(...V)
1880
ASW-6A
1205
ALSW-6A
1205
CSC6N3, CSC6N4, CSC6S3, CSC6S4, CSC6L3, CSC6L4 ST-6A(...V) UVT-6A(...V) ASW-6A ALSW-6A
CSC7S3, CSC7S4, CSC7L3, CSC7L4 ST-7A(...V)
POR
NA - ASW-7A
POR
ALSW-7A
POR
CSC8S3, CSC8S4, CSC8L3, CSC8L4 ST-7A(...V) NA - ASW-7A ALSW-7A
Suitable for use on New WB MCCBs
Direct Rotary
Handle
MRP
(`)
Direct Rotary Handle with
Keylock
MRP
(`)
Extended Rotary
Handle
MRP
(`)
CSC1N3, CSC1S3, CSC1N4, CSC1S4 DHC100
1150
DHCK100
3350
EHC100m
1940
CSC2N3, CSC2N4 DHC100 DHCK100 EHC100m
CSC3S3, CSC3S4, CSC3H3, CSC3H4 DHC125 1205 DHCK125 3450 EHC125 2090
CSC4N2 n DHC250
1410
DHCK250
3650
EHC250
2300
CSC4N3, CSC4N4, CSC4S3, CSC4S4 , CSC4H3, CSC4H4 DHC250 DHCK250 EHC250
CSC5N3, CSC5N4, CSC5S3, CSC5S4, CSC5L3, CSC5L4 N-70S 1650 - - E-70U 2670
CSC6N3, CSC6N4, CSC6S3, CSC6S4, CSC6L3, CSC6L4 N-70M 1770 - - E-80U 2980
CSC7S3, CSC7S4, CSC7L3, CSC7L4 NA - - - NA -
CSC8S3, CSC8S4, CSC8L3, CSC8L4 NA - - - NA -
Notes:
1. Please replace "" with R as MCCB left hand side position & T as MCCB right hand position
2. nLeft Hand Seat is not Available in 2Pole MCCBs.
3. For Frame Size upto 250AF, Shunt Trip available in 12VAC/DC, 24VAC/DC, 48VAC/DC, 60VAC/DC, 100-130VAC/DC, 200-250VAC/DC & 380-450VAC, 440-500VAC (Replace STC-
(...V) by required voltage)
4. For Frame Size above than 250AF, Shunt Trip available in 24-48VAC/DC, 100-220VAC/DC, 110AC/DC, 220VAC/DC, 380~500VAC (Replace ST-6A (...V) by required voltage)
5. For Frame Size upto 250AF, Under Voltage Trip available in 24VAC/DC, 48VAC/DC, 100~110VAC/DC, 200~220VAC/DC & 380-400VAC, 440~480VAC (Replace UVTC-(...V) by
required voltage)
6. For Frame Size above than 250AF, Under Voltage Trip available in 110VAC/DC, 220VAC/DC, 415VAC (Replace UVT-6A (...V) by required voltage)
7. Combination Switch with one Aux Switch+ One Alram Switch available upto 250AF. Order the same as follows:
- Replace AXWC-T +ALWC-T with XLC-T (Combination Switch): MRP Rs. 1700
- Replace AXWC-R +ALWC-R with XLC-R (Combination Switch): MRP Rs. 1700
8. Rotary Handle for Horizontal (Left & Right ) Mounting also available on request
9. Rotary Handle for 50AF & 100AF, 2Pole is not available
10. m LExtended Rotary Handele (Metalic) is also available. For price please see table at page 31.
MCCB
MRP w.e.f. 10 th June 2013
29
Moulded Case Circuit Breakers
Plug-in devices For Rapid replacement of MCCB without opening terminal
connection. The MCCB can be racked out by unscrewing top & bottom fixing
screws.
MCCB Plug in Base
MRP (`)
CSC1/CSC2 PB-A3-FR
POR
CSC3 PB-C3-FR
CSC4 PB-D3-FR
CSC5 PB-I3-FR
CSC6 PB-J3-FR
Earth Fault Relay (with NCT) Suitable for 3 Phase 4 wire distribution network
(Amps)
Earth Fault Relay
Setting Range
MRP (`)
40A 4~40A EFR125-AF-40
4170
100A 10~100A EFR125-AF-100
125A 12.5~125A EFR125-AF-125
4550
200A 20~200A EFR250-AF-200
250A 25~250A EFR250-AF-250
4970
400A 40~400A EFR400-AF-400
630A 63~630A EFR630-AF-630
5750
800A 80~800A EFR800-AF-800
1000A 100~1000A EFR1250-AF-1000
9500
1250A 125~1250A EFR1250-AF-1250
Earth Fault Relay (Built in CBCT) Suitable for 3Phase 3 wire distribution network
(Amps)
Earth Fault Relay
Setting Range
MRP (`)
32A 3.2~32A EFR-CBCT125-AF-32
4380
40A 4~40A EFR-CBCT125-AF-40
63A 6.3~63A EFR-CBCT125-AF-63
80A 8~80A EFR-CBCT125-AF-80
100A 10~100A EFR-CBCT125-AF-100
125A 12.5~125A EFR-CBCT125-AF-125
4780
200A 20~200A EFR-CBCT250-AF-200
250A 25~250A EFR-CBCT250-AF-250
5220
400A 40~400A EFR-CBCT400-AF-400
630A 63~630A EFR-CBCT630-AF-630
6040
800A 80~800A EFR-CBCT800-AF-800
1000A 100~1000A EFR-CBCT1250-AF-1000
9980
1250A 125~1250A EFR-CBCT1250-AF-1250
Mechanical Interlock (Used to prevent mechanically closing together)
Suitable for use on MCCBs
Applied between two MCCBs
MRP (`)
CSC5N3, CSC5S3, CSC5H3,CSC5L3 MI-43S 3360
CSC5N4, CSC5S4, CSC5H4, CSC5L4 MI-44S 4180
CSC6N3, CSC6S3, CSC6L3 MI-83S 4940
CSC6N4, CSC6S4, CSC6L4 MI-84S 1800
Enclosure for MCCBs upto 250AF (also for 4 Pole)
Suitable for use on MCCBs
MRP (`)
CSC1N3(14kA)/CSC1S3(18kA)/
CSC2N3(18kA)
CS-CNM0100020
1830
CSC4N3(26kA) CS-CNM0100021
Extented terminals for New WiNbreak MCCB
Description
MRP (`) Std Pkg. (No's)
For CSC1/CSC2/CSC3 - 3 Pole CSET1033 120 Set of 3
For CSC1/CSC2/CSC3 - 4 Pole CSET1044 200 Set of 4
For CSC4 - 3 Pole CSET2533 320 Set of 3
For CSC4 - 4 Pole CSET2544 480 Set of 4
For CSC5 - 3 Pole CSET4033 1100 Set of 3
For CSC5 - 4 Pole CSET4044 1450 Set of 4
For CSC6 - 3 Pole CSET8033 2770 Set of 3
For CSC6 - 4 Pole CSET8044 3620 Set of 4
For CSC7 - 3 Pole CSET10033
POR
Set of 3
For CSC7 - 4 Pole CSET10044 Set of 4
For CSC8 - 3 Pole CSET12033 Set of 3
For CSC8 - 4 Pole CSET12044 Set of 4
Terminal Covers
Suitable for use on MCCBs
For Line/Load Side
2Pole
MRP (`) 3Pole MRP (`) 4Pole MRP (`)
CSC1N, CSC1S, CSC2N
TCS12
-
210
TCS13
-
370
TCS14L (for Line)
210
TCS14R(for Lord)
CSC3S,CSC3H
- TCS23
-
520
TCS24L(for Line)
370
TCS24R(for Lord)
CSC4N, CSC4S, CSC4H
TCS33
-
418
TCS33
-
630
TCS34L(for Line)
418
TCS34R(for Lord)
CSC5N, CSC53, CSC5H, CSC5L - - T1-43A 1050 T1-44A 1250
CSC6N, CSC6S, CSC6L - - T1-63A 1250 T1-64A 1570
MCCB
Notes :
Earth Fault Relay Adjustable Setting : 10% - * of In
With each relay, suitable shunt trip of 220V AC only to be ordered separay
MRP w.e.f. 10 th June 2013
30
Range 5A - 1200A, 600V
WiNbreak
Moulded Case Circuit Breakers
(Standard packing includes extended terminals, insulating phase barrier and Hardware.)
l Positive isolation l Trip free mechanism
Ics=50% Icu
Rated Current (Amps)
2 Pole
MRP
(`)
3 Pole
MRP
(`)
4 Pole
MRP
(`)
10kA
5,10,15,20,30,40,50,60 n CS2A2 1910 CS2A3 2110 CS2A4 3100
75,100 CS2A2 1930 CS2A3 2160 CS2A4 3170
14kA
5,10,15,20,30,40,50,60 n CS2AA2
POR
CS2AA3
POR
CS2AA4
POR
75,100 CS2AA2 CS2AA3 CS2AA4
18kA
150, 175 CS3A2
POR
CS3A3
POR
CS3A4
POR 200 CS3A2 CS3A3 CS3A4
250 CS3A2 CS3A3 CS3A4
25kA
15,20,30,40,50,60 n CS2B2
POR
CS2B3
POR
CS2B4
POR
75,100 CS2B2 CS2B3 CS2B4
150, 175 CS3B2 CS3B3 CS3B4
200 CS3B2 CS3B3 CS3B4
250 CS3B2 CS3B3 CS3B4
300 - - CS4A3 CS4A4
350,400 - - CS4A3 CS4A4
35kA
15,20,30,40,50,60 n - - CS2C3
POR
CS2C4
POR
75,100 - - CS2C3 CS2C4
125 - - CS3C3 CS3C4
150 - - CS3C3 CS3C4
175,200 - - CS3C3 CS3C4
225 - - CS3C3 CS3C4
250,300 - - CS4B3 CS4B4
350,400 - - CS4B3 CS4B4
500,630 - - CS5A3 CS5A4
700,800 - - CS5A3 CS5A4
50kA
250,300 - - CS4C3
POR
CS4C4
POR
350,400 - - CS4C3 CS4C4
500,630 - - CS5B3 CS5B4
700,800 - - CS5B3 CS5B4
65kA
125,150,175,200 - - CS3D3
POR
CS3D4
POR 1000 - - CS6B3 CS6B4
1200 - - CS7B3 CS7B4
85kA
250, 300 - - CS4D3
POR
CS4D4
POR
350, 400 - - CS4D3 CS4D4
500, 630 - - CS5D3 CS5D4
700, 800 - - CS5D3 CS5D4
Notes : 1 . While Ordering, Replace "" by Rated Current required.
2. nExtended terminals are not included.
MCCB
PRODUCT DISCONTINUE - AVAILABLE TILL STOCK LAST
MRP w.e.f. 10 th June 2013
31
WiNbreak
Moulded Case Circuit Breakers - Accessories
Electrical Auxiliaries
For correct selection of ASW & ALSW, refer Picture CS1
Shunt & UVT are mounted on Right-hand Seat (T)
Suitable for use on MCCBs
Shunt Trip Under Voltage Trip Auxiliary Switch Alarm Switch Direct Rotary Handle
Extended Rotary
Handle
MRP
(`)
MRP
(`)
MRP
(`)
MRP
(`)
MRP
(`)
MRP
(`)
CS2A3/CS2A4 ST-A(..V) 1200 UVT-A(..V) 1500 ASW-A(R) 750 ALSW-A(R) 750 D-35S 1050 E-35S 2020
CS2A2 ST-A(..V) 1200 UVT-A(..V) 1500 ASW-A(T) 750 ALSW-A(T) 750 - -
POR
CS2B3/B4,CS2C3/C4 ST-B(..V)
POR
UVT-B(..V)
POR
ASW-B(R)
POR
ALSW-B(R)
POR
D-45S
POR
nE-45S
CS2B2 ST-B(..V) UVT-B(..V) ASW-B(T) ALSW-B(T) D-45S nE-45S
CS3A3/A4,CS3B3/B4,CS3C3/C4 ST-C(..V) UVT-C(..V) ASW-C(R) ALSW-C(R) D-55S nE-55S
CS3A2,CS3B2 ST-C(..V) UVT-C(..V) ASW-C(T) ALSW-C(T) D-55S NA
CS1D3,CS2D3 ST-4A(..V) UVT-4A(..V) ASW-4A(R) ALSW-4A(R) N-55 NA
CS1D4,CS2D4 ST-4B(..V) UVT-4B(..V) ASW-4A(T) ALSW-4A(T) N-55 NA
CS3D3 ST-5A(..V) UVT-5A(..V) ASW-5A(R) ALSW-5A(R) N-60 NA
CS3D4 ST-5B(..V) UVT-5B(..V) ASW-5A(T) ALSW-5A(T) N-60 NA
CS4A3/A4,CS4B3/B4, ST-6A(..V) UVT-6A(...V) ASW-6A ALSW-6A N-70S E-70U
CS4C3/C4,CS4D3/D4, ST-6A(..V) UVT-6A(...V) ASW-6A ALSW-6A N-70S E-70U
CS5A3/A4,CS5B3/B4, ST-6A(..V) UVT-6A(...V) ASW-6A ALSW-6A N-70M E-80U
CS5C3/C4,CS5D3/D4 ST-6A(..V) UVT-6A(...V) ASW-6A ALSW-6A N-70M E-80U
CS6B3/B4,CS7B3/B4 ST-7A(..V) NA ASW-7A ALSW-7A NA -
Please read R as MCCB left hand side position & T as right hand position
Notes :
1. While Ordering Replace "" by Rated Current required.
2. Shunt Trip Coil & UVT available in 24, 48V,110V,220V & l 415V AC/DC (Replace l by required Voltage). 220V & 415V
are standard stock items. UVT - 6A not available in 24V AC/DC. ( l not available for 1000A & 1200A MCCBs)
3. Single block for one Aux. Sw +one Alarm Switch available upto 225AF. Order the same as follows:
- Replace ASW-A+ALSW-A to XL-A(T)
- Replace ASW-B+ALSW-B to XL-B(T)
- Replace ASW-C+ALSW-C to XL-C(T)
4. Rotary handle for Horizontal (Left&Right) mounting also available on request.
5. Rotary Handle for 50AF & 100AF, 2Pole not available.
Please read R as MCCB left hand side position
& T as right hand position
Right-hand
Seat (T)
Left-hand
Seat (R)
Please refer above auxiliary selection for 3 & 4 Pole WiNbreak MCCB Only
n Extended rotary handle (metallic) is also available.
Frame Size
MRP (`)
CS2A3/A4, CSC1N3/N4, CSC1S3/S4, CSC2N3/N4 CSE-35S
940
CS2B3/B4, CS2C3/C4 & CS2B2 CSE-45
CS3A3/A4, CS3B3/B4 & CS3C3/C4 CSE-55 1050
MCCB
MRP w.e.f. 10 th June 2013
32
WiNbreak2
Moulded Case Circuit Breakers
Exeptional current limiting device with double break contacts (Ics=Icu=*)
lPositive isolation lDouble Break lTrip free mechanism l* Neutral Protection in 4 Pole lInterchangeable Trip Unit
FMU (Thermal Magnetic) Release l Adjustable Overload 80-* l Fixed short circuit
Ics=* Icu
Rated Current (Amps) 3 Pole MRP (`)
4 pole MCCBs are with Neutral protection
against overload and shortcircuit
4 Pole MRP (`)
50kA
16, 20, 25, 32, 40, 50, 63, 80, 100n CD100NFMU3P 8320 CD100NFMU4P 12080
125 CS160NFMU3P 11770 CS160NFMU4P 16340
160 CS160NFMU3P 14620 CS160NFMU4P 20200
200 CS250NFMU3P 19180 CS250NFMU4P 25070
250 CS250NFMU3P 22030 CS250NFMU4P 28620
65kA
300 & 400 CS400NFMU3P 25170 CS400NFMU4P 34920
500 & 630 CS630NFMU3P 29640 CS630NFMU4P 38160
800 CS800NFMU3P 42430 CS800NFMU4P 61610
ATU (Thermal Magnetic) Release l Adjustable Overload 80 - * l Adjustable Short circuit 5 - 10 In
Ics=* Icu
Rated Current (Amps) 3 Pole MRP (`)
4 pole MCCBs are with Neutral protection
against overload and shortcircuit
4 Pole MRP (`)
50kA
125 CS160NATU3P 12080 CD100NFMU4P 17050
160 CS160NATU3P 15020 CS160NFMU4P 20400
200 CS250NATU3P 19690 CS160NFMU4P 25880
250 CS250NATU3P 22940 CS250NFMU4P 29130
65kA
300 & 400 CS400NATU3P 25680 CS250NFMU4P 35530
500 & 630 CS630NATU3P 31060 CS400NFMU4P 39790
800 CS800NATU3P 44760 CS630NFMU4P 63030
ETS (Microprocessor based) Release l
n Adjustable Overload 40 - * n Adjustable shortcircuit 1.5 - 10 In
Icu = Ics
Rated Current (Amps) 3 Pole MRP (`)
4 Pole MRP (`)
50kA
40n, 80, 160 CS160NETS3P 23450 ? CS160NETS4P 28500
250 CS250NETS3P 27000 ? CS250NETS4P 40000
65kA
160, 250, 400 CS400NETS3P 29640 ? CS400NETS4P 72000
160, 250, 400, 630 CS630NETS3P 35730 ? CS630NETS4P 85000
630, 800 CS800NETS3P 50240 ? CS800NETS4P 86500
ETM (Microprocessor Release with in-built Earth fault Protection)
n Adjustable Overload 40 - * n Adjustable shortcircuit 1.5 - 10 In
Ics=* Icu
Rated Current (Amps) 3 Pole MRP (`)
4 Pole MRP (`)
65kA
160 CS400NETM33160A3PE
POR
CS400NETM33160A4PE
POR
250 CS400NETM33250A3PE CS400NETM33250A4PE
400 CS400NETM33400A3PE CS400NETM33400A4PE
630 CS630NETM33630A3PE CS630NETM33630A4PE
800 CS800NETM43800A3PE CS800NETM43800A4PE
1. n Extended terminals are not included for MCCBs upto 63A
2. Replace "" with required current range
3. MCCB with microprocessor release having OL, SC, Ammeter, ZSI & RS485 port is also available.
For prices contact nearest branch office.
4. MCCB with Magnetic only trip is also available. For prices contact nearest branch office.
MCCB
MRP w.e.f. 10 th June 2013
33
WiNbreak2
Moulded Case Circuit Breakers - Accessories
Internal Accessories
Description
MRP (`)
Aux. Switch AX-T
1100 Alarm Switch AL-T
Fault Alarm Switch FAL-T
Shunt trip coil ST-T 2530
UVT coil UVT-T 3430
Padlocking Device
Suitable for MCCB Type
MRP (`)
CD 100 / 160 PHL 1 1200
CS 160 / 250 PHL 2 1330
CS 400 / 630 PHL 3 2140
CS 800 PHL 4 2420
CD 100 / 160 PL 1 700
CS 160 / 250 PL 2 900
CS 400 / 630 PL 3 1100
CS 800 PL 4 1150
Direct Rotary Handle with Keylock
Description
MRP (`)
CD 100 DHK1-S 3900
CS 160 & 250 DHK2-S 4100
CS 400 & 630 DHK3-S 4300
CS 800 DHK4-S 4480
Plug-in Base
Description
MRP (`)
CD 100 / 160 3P ? PB 13 1370
CS 160 / 250 3P ? PB 23 17020
CS 400 / 630 3P ? PB 33 27310
CS 800 3P ? PB 43 68330
Rotary Handle
Suitable for MCCB Type
Direct Extended
MRP (`) MRP (`)
CD 100 DH1-S 1370 EH1-S 2060
CS 160 & 250 DH2-S 1490 EH2-S 2470
CS 400 & 630 DH3-S 2920 EH3-S 3840
CS 800 DH4-S 3490 EH4-S 4530
Mechanical Interlock Device
Suitable for MCCB Type
3 Pole 4 Pole
MRP (`) MRP (`)
CD100 MIT13 6770 MIT14 7110
CS160 & 250 MIT23 8250 MIT24 8540
CS 400 & 630 MIT33 8760 MIT34 8990
CS 800 MIT43 9570 MIT44 9650
Extended Terminals for WinBreak2 MCCB
Description MRP (`) Std. Pkg.
For CS400 & CS630, 3Pole CSCETSP33 2400 Set of 3
For CS400 & CS630, 4Pole CSCETSP34 3200 Set of 4
For CS800, 3Pole CSET8033 2770 Set of 3
For CS800, 4Pole CSET8044 3620 Set of 4
Motor Operator
Suitable for MCCB Type Motor Type Control Voltage MRP (`)
CD100 MOP1
100V-200V AC 24V DC
100V & 220V DC
16250
CS160, 250 MOP2
100V-110V AC, 230V AC
24V DC & 220V DC
21540
CS400, 630 MOP3
100V-110V AC, 230V AC
24V DC & 220V DC
33920
CS800 MOP4
100V-110V AC, 230V AC
24V DC & 220V DC
40060
PHL - Fixed Type PL - Removable Type
Notes :
1) The above accessories are common to entire WiNbreak2 MCCBs. Specify Coil
Voltage (12V, 24V, 48V, 110V, 220V AC/DC & 415AC) 220V & 415V are stock item.
2) WiNbreak2 MCCBs are available up to Icu=Ics=150kA for entire range for higher
short circuit level, Price avialable on request.
MCCB
MRP w.e.f. 10 th June 2013
34
MCCB
Range 16A -250A, 690V
WiNbreak1
Moulded Case Circuit Breakers
(Standing Packing includes insulating phase barrier and Hardware)
lPositive Isolation lTrip Free mechanism
FMU (Thermal Magnetic) Release l Adjustable Overload 80-* l Fixed short circuit
Breaking
capacity
Ics = *Icu
Rated Current (Amps) 3 Pole MRP (`) 4 Pole MRP (`)
25kA 16, 20, 30, 40, 50, 63 CSE1M125FMU3P- 4575 CSE1M125FMU4P- 6050
35kA 16, 20, 30, 40, 50, 63 CSE1N125FMU3P- POR CSE1N125FMU4P- POR
ATM (Thermal Magnetic)Release l Adjustable Overload 80-* l Adjustable Short Circuit 5-10 In
Breaking
capacity
Ics = *Icu
Rated Current (Amps) 3 Pole MRP (`) 4 Pole MRP (`)
25kA
80, 100 CSE1M125ATM3P- 4600 CSE1M125ATM4P- 6100
125 CSE1M125ATM3P- 6600 CSE1M125ATM4P- 8700
160 CSE2M250ATM3P- 9950 CSE2M250ATM4P- 12800
200 CSE2M250ATM3P- 11800 CSE2M250ATM4P- 15300
250 CSE2M250ATM3P- 14500 CSE2M250ATM4P- 19300
35kA
80, 100 CSE1N125ATM3P-
POR
CSE1M125ATM4P-
POR
125 CSE1N125ATM3P- CSE1M125ATM4P-
160 CSE2N250ATM3P- CSE2N250ATM4P-
200 CSE2N250ATM3P- CSE2N250ATM4P-
250 CSE2N250ATM3P- CSE2N250ATM4P-
Locking Device for WinBreak1
Frame Size Key Lock MRP
Mechanical
Interlock
MRP Padlock MRP
CSE1 KLW1-125 1150 MIW1-125 2550 PLW1-125 1200
CSE2 KLW1-250 1250 MIW1-250 2650 PLW1-250 1330
Accessories for WinBreak1 MCCBs
Description 4 MRP (`)
Aux Switch AXW1- 810
Alarm Switch ALW1- 810
Combined Switch(Aux+Alarm) XLW1- 1050
Shunt trip Coil STW1-(....) 1600
UVT Coil UVTW1-(...) 2750
Extended Rotary Handle, CSE1 EHW1-125 1700
Extended Rotary Handle, CSE2 EHW1-250 2000
Notes :
1. While Ordering, Replace"" by Rated Current required.
2. For technical details please refer product catalogue
3. Extended Terminals are not included. For prices, please refer page no. 37
Will be supplied only Factory fitted.
The internal accessories are common to entire WinBreak1 MCCBs.
Please Replace "" with R as MCCB Left hand side position & T as MCCB Right
hand position
1. Shunt Trip available in 24VDC, 48VDC, 110VDC, 220VDC & 220VAC, 415VAC
(Replace STW1-(...) by required voltage)
2. Under Voltage Release in 24VDC, 48VDC, 110VDC, 220VDC & 220VAC, 415VAC
(Replace STW1-(...) by required voltage)
3. Combination Switch with one Aux Switch+ One Alram Switch is also available.
MRP w.e.f. 10 th June 2013
35
ACE 2
Moulded Case Circuit Breakers
lPositive isolation lDouble Break lTrip free mechanism
Thermal Magnetic Release (Adjustable Overload & Short Circuit setting)
Ics=Icu at 415V AC (kA)
Rated Current (Amps) 3 Pole MRP (`) 4 Pole MRP (`)
36kA
l Adjustable Overload
l Fixed Short Circuit
16, 20, 25, 32, 40, 50, 63 n CSCN125TM3P 7140 CSCN125TM4P 8740
80,100 CSCN125TM3P 7350 CSCN125TM4P 9170
125 CSCN125TM3P 8420 CSCN125TM4P 10120
l Adjustable Overload
l Adjustable Short Circuit
160, 180 CSCN250TM3P 10970 CSCN250TM4P 13320
200 CSCN250TM3P 12580 CSCN250TM4P 16620
250 CSCN250TM3P 15130 CSCN250TM4P 20880
50kA
l Adjustable Overload
l Fixed Short Circuit
16, 20, 25, 32, 40, 50, 63 n CSCS125TM3P 7360 CSCS125TM4P 10550
100 CSCS125TM3P 7570 CSCS125TM4P 10970
125 CSCS125TM3P 10870 CSCS125TM4P 15350
l Adjustable Overload
l Adjustable Short Circuit
160 CSCS250TM3P 13320 CSCS250TM4P 18540
200 CSCS250TM3P 17800 CSCS250TM4P 23980
250 CSCS250TM3P 21200 CSCS250TM4P 28460
Microprocessor Release
LSIN - Adjustable Overload, Short Circuit, Instantaneous and Neutral Protection
Ics=Icu at 415V AC (kA)
Rated Current (Amps) 3 Pole MRP (`) 4 Pole MRP (`)
36kA
40 n,100,125 CSCN125EM3P 11300 CSCN125EM4P 13860
160 CSCN250EM3P 14070 CSCN250EM4P 16200
200 CSCN250EM3P 17800 CSCN250EM4P 19720
250 CSCN250EM3P 20670 CSCN250EM4P 22910
50kA
40 n,100 ? CSCS125EM3P
POR
? CSCS125EM4P
POR
125 ? CSCS125EM3P ? CSCS125EM4P
160 ? CSCS250EM3P ? CSCS250EM4P
200 ? CSCS250EM3P ? CSCS250EM4P
250 ? CSCS250EM3P ? CSCS250EM4P
315, 350, 400 ? CSCS400EM3P ? CSCS400EM4P
500, 630 ? CSCS630EM3P ? CSCS630EM4P
700, 800 n ? CSCS800EM3P ? CSCS800EM4P
1000 n ? CSCS1250EM3P ? CSCS1250EM4P
1250 n ? CSCS1250EM3P ? CSCS1250EM4P
70kA
40 n,100 ? CSCH125EM3P ? CSCH125EM4P
125 ? CSCH125EM3P ? CSCH125EM4P
160 ? CSCH250EM3P ? CSCH250EM4P
200 ? CSCH250EM3P ? CSCH250EM4P
250 ? CSCH250EM3P ? CSCH250EM4P
315, 350, 400 ? CSCH400EM3P ? CSCH400EM4P
500, 630 ? CSCH630EM3P ? CSCH630EM4P
700, 800 n ? CSCH800EM3P ? CSCH800EM4P
1000 n ? CSCH1250EM3P ? CSCH1250EM4P
1250 n ? CSCH1250EM3P ? CSCH1250EM4P
MCCB
Notes :
1. While Ordering, Replace "" by Rated Current required.
2. Extended Terminals are not included - Please refer table on page no. 36
3. For technical details please refer product catalogue
n Extended terminal are not included.
MRP w.e.f. 10 th June 2013
36
ACE 2
Moulded Case Circuit Breakers
Accessories
Internal Accessories
Description Frame
Voltage
MRP (`)
220V AC 380/415V AC 24V DC 110V DC
Shunt Release
CSCN125TM STC92 STC95 STC98 -- 1650
CSC125EM
STC93 STC96 STC99 -- 1870
CSC250EM
CSCN250TM
CSC400EM
CSC630EM
CSC800EM
STC94 STC97 STC00 STC01 POR
CSC1250EM
U/V Release
CSCN125TM UVTC02 UVTC05 -- -- 2510
CSC125EM
UVTC03 UVTC06 -- -- 2720
CSC250EM
CSCN250TM
CSC400EM
CSC630EM
CSC800EM
UVTC04 UVTC07 -- -- POR
CSC1250EM
Aux/Alarm Contacts
Description MRP (`)
Auxiliary Contact(Left) AXC-L
880 Auxiliary Contact(Middle) AXC-M
Auxiliary Contact(right) AXC-R
Alarm Contact ALC 980
Extended Rotary Handle
Description 3 Pole 4 Pole MRP (`)
CSCN125TM/CSCS125TM EC-55 EC-19 1760
CSC125EM
EC-56 EC-20 2180 CSC250EM
CSCN250TM/CSCS250TM
? CSC400EM
EC-57 EC-21
POR
? CSC630EM
? CSC800EM
EC-58 EC-58
? CSC1250EM
Motor Operator
Suitable for MCCB Typ Voltage MRP (`)
? CSCN125TM MOPC-88 240AC/220VDC
POR
? CSC125/250EM
MOPC-89 240AC/220VDC
? CSCN250TM
? CSC400/630EM MOPC-90 230VAC/220VDC
? CSC800/1250EM MOPC-91 AC230V400V
MCCB
Extended Terminals for ACE2 MCCB
Description MRP (`) Std. Pkg.
For CSCS400/CSCH400, 3 Pole CSCETSP33 2400 Set of 3
For CSCS400/CSCH400, 4 Pole CSCETSP34 3200 Set of 4
For CSCS630/CSCH630, 3 Pole CSCETSP33 2400 Set of 3
For CSCS630/CSCH630, 4 Pole CSCETSP34 3200 Set of 4
For CSCS800/CSCH800, 3 Pole CSCET6063 4000 Set of 3
For CSCS800/CSCH800, 4 Pole CSCET6114 6000 Set of 4
For CSCS1250/CSCH1250, 3 Pole CSCET6063 7200 Set of 3
For CSCS1250 / CSCH1250, 4 Pole CSCET6114 10500 Set of 4
MRP w.e.f. 10 th June 2013
37
Product discontinue-available till stock last
Product discontinue-available till stock last
ACE
Moulded Case Circuit Breakers
Acessories
MCCB Spreaders (extended terminals) for use with MCCB type
Ics=75% of Icu
Ics=Icu at
415V AC
Rated
Current (A)
3 Pole
MRP
(`)
4 Pole
MRP
(`)
25kA
24~32n CSZ2B3 32
POR
CSZ2B4 32
POR
32~40n CSZ2B3 40 CSZ2B4 40
40~50n CSZ2B3 50 CSZ2B4 50
50~63n CSZ2B3 63 CSZ2B4 63
63~80n CSZ2B3 80 CSZ2B4 80
80~100n CSZ2B3 100 CSZ2B4 100
100~125n CSZ2B3 125 CSZ2B4 125
125~160n CSZ3B3 160 CSZ3B4 160
160~200n CSZ3B3 200 CSZ3B4 200
200~250n CSZ3B3 250 CSZ3B4 250
Ics=* of Icu
Ics=Icu at 415V AC
Rated
Current (A)
3 Pole
MRP
(`)
4 Pole
MRP
(`)
25kA
24~32n CSZ2H3 32
POR
CSZ2H4 32
POR
32~40n CSZ2H3 40 CSZ2H4 40
40~50n CSZ2H3 50 CSZ2H4 50
50~63n CSZ2H3 63 CSZ2H4 63
63~80n CSZ2H3 80 CSZ2H4 80
80~100n CSZ2H3 100 CSZ2H4 100
100~125n CSZ2H3 125 CSZ2H4 125
125~160n CSZ3H3 160 CSZ3H4 160
160~200n CSZ3H3 200 CSZ3H4 200
200~250n CSZ3H3 250 CSZ3H4 250
Product Description
3 Pole
125AF MRP (`) 250AF MRP (`)
Aux. Switch AXZ2
POR
AXZ3
POR
Alarm Switch ALZ2 ALZ3
Extended Rotary Handle CSDHZ2 CSDHZ3
UVT Release UVZ2-(..V) UVZ3-(..V)
Shunt Release STZ2-(..V) STZ3-(..V)
Description
MRP
(`)
Std. Pkg.
WiNbreak New WiNbreak WinBreak2 WinBreak1 ACE2 ACE
CSET1033 For 100AF, 3 Pole For 125AF, 3 Pole For 100AF, 3 Pole For 125AF, 3 Pole ACE2 TM for 125AF 3Pole For 125AF, 3 Pole 120 Set of 3
CSET1044 For 100AF, 4 Pole For 125AF, 4 Pole For 100AF, 4 Pole For 125AF, 4 Pole ACE2 TM for 125AF 4Pole For 125AF, 4 Pole 200 Set of 4
CSET2533 For 250AF, 3 Pole For 250AF, 3 Pole
For 160AF, 250AF,
3 Pole
For 250AF, 3 Pole
ACE2 TM for 250AF 3P ACE2 EM
upto 250AF 3Pole
For 250AF, 3 Pole 320 Set of 3
CSET2544 For 250AF, 4 Pole For 250AF, 4 Pole
For 160AF, 250AF,
4 Pole
For 250AF, 4 Pole
ACE2 TM for 250AF 4P ACE2 EM
upto 250AF 4Pole
For 250AF, 4 Pole 480 Set of 4
n Extentended terminals not included
UVT available in 110V, 230V, 415V AC & 24V, 48V, 110V DC {replace (..V) by required
voltage} Shunt trip available in 110V, 220V, 415V AC & 24V, 48V, 110V, 220V DC
{replace (..V) by required voltage)
MCCB
MRP w.e.f. 10 th June 2013
38
New Test Position SDF Without Fuse Links
Switch Disconnector Fuse Unit
(A)
Pole
MRP
(`)
MRP
(`)
Recommended Fuse
Link #
32 TPN CSCSDF32SN12CGF0000 1660 E-CSCSDF32SN12CGF0000 3430 CGF
63 TPN CSCSDF63SN12CHF0000 2360 E-CSCSDF63SN12CHF0000 4500 CHF
Auxiliary Contacts
Description
MRP (`)
1NO +1NC for 32- 63 Comapct SDF CSDFAUX11 425
2NO +2NC for 32- 63 Comapct SDF CSDFAUX22 785
Spare Auxiliary TEST Block
Description
MRP (`)
32~63A TSTAUX 630
Extension Shaft for Handle
MRP (`)
32~63A CSP6X14 200
Spare Handle
MRP (`)
32~63A CSTH 80 S6B 260
MRP w.e.f. 10 th June 2013
39
Amps Pole
CSSDF in Open Execution CSSDF in Sheet Steel Enclosure
Recommended
Fuse Links Type (IEC Size)
MRP
(`)
MRP
(`)
MRP
(`)
MRP
(`)
DIN BS DIN BS DIN BS
32A
2P CSSDF32D2 CSSDF32B2
CDFL00 (32) CTIA-32 (A2)
TP CSSDF32D3 1370 CSSDF32B3 1510 E-CSSDF32D3 POR E-CSSDF32B3 POR
TPN CSSDF32D3N 1480 CSSDF32B3N 1560 E-CSSDF32D3N 3020 E-CSSDF32B3N 3020
4P CSSDF32D4FN 2060 CSSDF32B4FN 2130 E-CSSDF32D4FN 3350 E-CSSDF32B4FN 3220
63A
2P CSSDF63D2 CSSDF63B2
CDFL00 (63) CTIS-63 (A3)
TP CSSDF63D3 1970 CSSDF63B3 1940 E-CSSDF63D3 POR E-CSSDF63B3 POR
TPN CSSDF63D3N 2240 CSSDF63B3N 2050 E-CSSDF63D3N 3840 E-CSSDF63B3N 3550
4P CSSDF63D4FN 2520 CSSDF63B4FN 2540 E-CSSDF63D4FN 3990 E-CSSDF63B4FN 3990
100A
2P CSSDF100D2 CSSDF100B2
CDFL00 (100) CTCP-100 (A4)
TP CSSDF100D3 4480 CSSDF100B3 4110 E-CSSDF100D3 POR E-CSSDF100B3 POR
TPN CSSDF100D3N 4700 CSSDF100B3N 4330 E-CSSDF100D3N 6550 E-CSSDF100B3N 6210
4P CSSDF100D4FN 5680 CSSDF100B4FN 5820 E-CSSDF100D4FN 7320 E-CSSDF100B4FN 7210
125A
2P CSSDF125D2 CSSDF125B2
CDFL00 (125) CTCP-125 (A4)
TP CSSDF125D3 4780 CSSDF125B3 4810 E-CSSDF125D3 POR E-CSSDF125B3 POR
TPN CSSDF125D3N 5030 CSSDF125B3N 5080 E-CSSDF125D3N 7580 E-CSSDF125B3N 7130
4P CSSDF125D4FN 6480 CSSDF125B4FN 6400 E-CSSDF125D4FN 7800 E-CSSDF125B4FN 8250
160A
2P CSSDF160D2 CSSDF160B2
CDFL00 (160) CTF-160 (B2)
TP CSSDF160D3 5490 CSSDF160B3 5710 E-CSSDF160D3 POR E-CSSDF160B3 POR
TPN CSSDF160D3N 6020 CSSDF160B3N 5820 E-CSSDF160D3N 8290 E-CSSDF160B3N 7960
4P CSSDF160D4FN 7330 CSSDF160B4FN 7380 E-CSSDF160D4FN 10310 E-CSSDF160B4FN 10860
200A
2P CSSDF200D2 CSSDF200B2
CDFL-1-200 CTF-200 (B2)
TP CSSDF200D3 6410 CSSDF200B3 6540 E-CSSDF200D3 POR E-CSSDF200B3 POR
TPN CSSDF200D3N 6900 CSSDF200B3N 6840 E-CSSDF200D3N 9480 E-CSSDF200B3N 8370
4P CSSDF200D4FN 8390 CSSDF200B4FN 8310 E-CSSDF200D4FN 10930 E-CSSDF200B4FN 11370
250A
2P CSSDF250D2 CSSDF250B2
CDFL-1-250 CTK F-250(B3)
TP CSSDF250D3 7520 CSSDF250B3 8050 E-CSSDF250D3 POR E-CSSDF250B3 POR
TPN CSSDF250D3N 8440 CSSDF250B3N 8480 E-CSSDF250D3N 11370 E-CSSDF250B3N 10700
4P CSSDF250D4FN 9830 CSSDF250B4FN 9840 E-CSSDF250D4FN 12490 E-CSSDF250B4FN 13160
315A
2P CSSDF315D2 CSSDF315B2
CDFL-2-315 CTKF-315 (B3)
TP CSSDF315D3 10090 CSSDF315B3 10050 E-CSSDF315D3 POR E-CSSDF315B3 POR
TPN CSSDF315D3N 11320 CSSDF315B3N 10870 E-CSSDF315D3N 14110 E-CSSDF315B3N 14570
4P CSSDF315D4FN 14190 CSSDF315B4FN 13750 E-CSSDF315D4FN 16910 E-CSSDF315B4FN 17480
400A
2P CSSDF400D2 CSSDF400B2
CDFL-2-400 CTMF-400 (B4)
TP CSSDF400D3 13020 CSSDF400B3 12770 E-CSSDF400D3 POR E-CSSDF400B3 POR
TPN CSSDF400D3N 14010 CSSDF400B3N 13100 E-CSSDF400D3N 14890 E-CSSDF400B3N 16460
4P CSSDF400D4FN 16560 CSSDF400B4FN 16350 E-CSSDF400D4FN 17920 E-CSSDF400B4FN 19270
630A
2P CSSDF630D2 CSSDF630B2
CDFL-3-630 CTTM-630 (C2)
TP CSSDF630D3 20010 CSSDF630B3 20980 E-CSSDF630D3 POR E-CSSDF630B3 POR
TPN CSSDF630D3N 22050 CSSDF630B3N 21870 E-CSSDF630D3N 23860 E-CSSDF630B3N 27780
4P CSSDF630D4FN 23980 CSSDF630B4FN 23180 E-CSSDF630D4FN 29010 E-CSSDF630B4FN 31960
800A
2P CSSDF800D2 CSSDF800B2
- CTLM-800 (C3)
TP CSSDF800D3 24410 CSSDF800B3 24200 E-CSSDF800D3 - E-CSSDF800B3 POR
TPN CSSDF800D3N 27000 CSSDF800B3N 27160 E-CSSDF800D3N - E-CSSDF800B3N 29730
4P CSSDF800D4FN 28780 CSSDF800B4FN 28690 E-CSSDF800D4FN - E-CSSDF800B4FN 34730
Notes: 2 Pole switch prices available on request.
Switch Disconnector Fuse Unit without Fuse Links
LT Heavy Duty Switch Disconnector Fuse Unit CSSDF 32A - 800A, 415V, 50Hz complete with Handle Assembly having Door Interlock and Padlocking
arrangement
Switch Disconnector Fuse Unit
MRP w.e.f. 10 th June 2013
40
Accessories Switch Disconnector Fuse Unit
Key Interlocks (3 Locks - 2 Keys)
For Switch Type
MRP (`)
CSSDF 32A - 160A CSSDFZW-16 3520
CSSDF 200A - 800A CSSDFZW-5 2950
Spare Poles ( Price per Pole )
(Amps)
MRP (`)
DIN BS
32 CSSDF-SP-32D CSSDF-SP-32B 810
63 CSSDF-SP-63D CSSDF-SP-63B 1040
100 CSSDF-SP-100D CSSDF-SP-100B 1950
125 CSSDF-SP-125D CSSDF-SP-125B 2150
160 CSSDF-SP-160D CSSDF-SP-160B 2520
200 CSSDF-SP-200D CSSDF-SP-200B 2925
250 CSSDF-SP-250D CSSDF-SP-250B 3990
315 CSSDF-SP-315D CSSDF-SP-315B 4470
400 CSSDF-SP-400D CSSDF-SP-400B 5730
630 CSSDF-SP-630D CSSDF-SP-630B 8150
800 -- CSSDF-SP-800B 9940
Spare Handle Shaft
CSSDF 32A-160A CSP6x165 210
CSSDF 200A-800A CSP12x255 360
Spare Neutral Links
For Switch Type
CSSDF 32A-63A CSSDF ZX 87 290
CSSDF 100A-160A CSSDF ZX 86 350
CSSDF 200A-400A CSSDF ZX 85 600
CSSDF 630A-800A CSSDF ZX 88 680
Spare Handle
For Switch Type
CSSDF 32A-160A (Moulded) CSWH 80 S6 470
CSSDF 200A-400A (Moulded) CSWH 145 S12 810
CSSDF 630A-800A (Moulded) CSWH 220 S12 1030
Castle Key Locks
CSSDF 32A - 160A CSSDFZW-15
2950
CSSDF 200A - 800A CSSDFZW-4
Auxiliary Contacts
1 NO + 1 NC CSSDF 32A - 63A for 3P CSSDFZX 46 450
2 NO + 2 NC CSSDF 32A - 63A for 3P CSSDFZX 32 840
1 NO + 1 NC CSSDF 32A - 63A for 2P & 4P CSSDFZX 46B 450
2 NO + 2 NC CSSDF 32A - 63A for 2P & 4P CSSDFZX 32B 840
1 NO + 1 NC CSSDF 100A - 160A CSSDFZX 1 450
2 NO + 2 NC CSSDF 100A - 160A CSSDFZX 16 840
1 NO + 1 NC CSSDF 200A - 400A CSSDFZX 33 450
2 NO + 2 NC CSSDF 200A - 400A CSSDFZX 34 840
1 NO + 1 NC CSSDF 630A - 800A CSSDFZX 35 450
2 NO + 2 NC CSSDF 630A - 800A CSSDFZX 36 840
Handle Mounting Kit (for independent mounting of O/E Switches)
CSSDF 200A - 400A HMK-1-2 1140
CSSDF 630A - 800A HMK-3-2 1210
Extended Terminals
32A-63A
TPN ET-323 310
4P ET-324 370
100A-160
TPN ET-327 730
4P ET-328 1050
200A-400A
TPN ET-329 2140
4P ET-330 2610
Switch Disconnector Fuse unit with various options
Centre Mechanism, Fuse
Cover and Terminal Shroud
are also on request 200A DIN/
BS~630A DIN
Fuse Cover and Terminal
Shroud are also on request
200A DIN/BS~630A DIN
Spare
Switch Disconnector Fuse Unit
MRP w.e.f. 10 th June 2013
41
Switch Disconnectors (Load Break Switches)
"" Moulded Pole Construction
LT Heavy Duty Load Break Switches CSSD 25A - 125A, 415V, 50Hz complete with Rotary Handle Assembly having door interlock and padlocking arrangement.
Handle colour: Red Knob and Yellow Base (standard) Black Base and Knob on request.
Modular Pole construction
LT Heavy Duty Load Break Switches CSSD 125A - 3150A, 415V, 50Hz complete with Handle Assembly having door interlock and padlocking arrangement.
Amps Pole
CSSD In Open Execution In Sheet Steel Enclosure
MRP (`) MRP (`)
25
3 CSSD25D3 1180 E-CSSD25D3 2470
4 CSSD25D4 1500 E-CSSD25D4 2680
40
3 CSSD40D3 1500 E-CSSD40D3 2900
4 CSSD40D4 2360 E-CSSD40D4 3110
63
3 CSSD63K3 1830 E-CSSD63K3 3430
