產品特點：

Prognostic BTS100軸承壽命預測測試臺的關鍵部件,工作在高速,高溫以及高載荷的變工況下,極易發生故障,因此,對滾動軸承進行故障診斷和全壽命預測從而實現故障單期預警和精確的維修決策，避免故隙引發的事故BTS100軸承壽命預測測試臺，可以開展軸承壽命加速實驗，實驗原理就是在不改變軸承失效機理，不增加新的失效模式的前提下，通過提高試驗軸承應力水平的方法來加速其失效進程，然后再根據試驗數據運用數理統計理論估算出正常應力下軸承的壽命的數據

The rolling bearing is a key component of rotating machinery, working in high speed, high temperature and high  load under variable working conditions, very easy to failure, therefore, the rolling bearing fault diagnosis and  fatigue life prediction to realize the failure of single-phase early warning and accurate maintenance decision, to  avoid accidents caused by the gap BTS100 Bearing Life Prediction Test Bench, can be carried out to accelerate the  life of bearings experiments, the principle of the experiment is that in the bearing failure mechanism, without  adding new failure mode under the premise of increasing the test bearing stress level to accelerate its failure  process, and then estimate the normal stress under the test data using mathematical and statistical theory to accelerate the failure process. The principle of the experiment is that without changing the failure mechanism of the  bearing, without increasing the new failure mode under the premise of increasing the stress level of the test bearing  to accelerate the failure process, and then according to the test data using mathematical and statistical theories to  estimate the life data of the bearing under normal stress.。

測試臺組成：

Prognostic BTS100軸承壽命預測測試臺，主要由三相異步電動機，聯軸器，雙支撐軸承座單元，測試軸承、溫度監測模塊、轉速調節及轉速顯示模塊，徑向及軸向液壓油站加載系統、負載顯示模塊，轉速脈沖輸出模塊，等模塊組成。

BTS100 Bearing Prognostic Simulator, mainly consists of three-phase asynchronous motor, coupling, double-supported bearing housing unit, test bearings, temperature monitoring module, rotational speed regulation and  rotational speed display module, radial and axial hydraulic oil station loading system, load display module,  rotational speed pulse output module, and other modules

測試臺主要功能：

l檢測故障滾子軸承

l熟悉包絡分析和信號處理技術

l外圈，內圈或滾動體，保持架的損傷對頻譜的影響

l潤滑劑對振動頻譜的影響

l進行軸承磨損發展的基礎研究

l了解軸承缺陷機制作為軸承載荷，轉速的函數關系

l基于損傷發展，運行速度，載荷類型和軸承尺寸估算滾子軸承使用壽命預測模型的開發

l振動，電機電流，負載，摩擦和噪聲與頻譜之間的相關性

l模型基本診斷/預測算法的證明

測試臺基本技術參數：