金屬齒形墊片 一般用精密的車床在金屬不銹鋼平墊片的二面加工成同心的溝槽，根據不同的介質，可選擇柔性石墨、PTFE、無石棉板或其它一些軟金屬，粘貼在墊片的二面。也可不帶密封層直接使用，且能直到良好的密封效果，但在高壓場合中容易對法蘭的表面造成損失。

TD-KF710 Kammprofile gasket the gasket consist of a metal core, generally stainless steel with concentric grooves on both sides. A sealing layer is usually applied on either side and depending on the service duty the material for this layer can be expanded graphite, PTFE, Asbestos free gasket sheeting materials or some soft metal. It can be used without sealing layers to provide an excellent sealing but there is a risk of flange surface damage especially at high seating pressure.

TD-KF710    基本型金屬齒形墊            Basic Type Kammprofile Gasket

TD-KF710JR 帶外環金屬齒形墊（整體式）   Kammprofile Gasket with integral Outer Ring

TD-KF710 SJ 帶外環金屬齒形墊（分體式）  Kammprofile Gasket with Loose Outer Ring

在較低的預緊力下使用是首先的墊片，表面柔軟的密封層避免了金屬對金屬的直接接觸，且能可靠、緊密的結合，保護了金屬法蘭不被損傷，即使在*的載荷下。齒形組合墊尤其適合于高溫、高壓，工況條件交變的場合，在熱交換器、容器、反應釜的法蘭連接處，是傳統金屬包覆墊片的理想替代品。壓力使用范圍：6.4~25Mpa 

gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint.  It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: （6.4~25Mpa）

可選材料MATERIAL：