| Thermal dome cameras for indoor security and safety applications The D-series are extremely affordable thermal imaging domes. They incorporate a thermal imaging camera which produces clear, crisp images in total darkness. A thermal imaging camera can also see through smoke. The D-series incorporate the same thermal imaging technology found in many of FLIR’s most sophisticated systems, but is packaged for users who have indoor security and safety as their primary application. Contrary to other technologies, thermal imaging does not need any light whatsoever to produce an image on which the smallest of details can be seen. 
Technical specifications Imaging performance Detector type Focal Plane Array （FPA）, uncooled microbolometer: 160 x 120 pixels for D-6; 320 x 240 pixels for D-19 Spectral range 7.5 to 13 μm Field of View D-6: 52° （H） x 40° （V） with 6 .3 mm lens and 160 x 120 pixels FPA D-19: 36° （H） x 27° （V） with 19 mm lens and 320 x 240 pixels FPA Spatial Resoltuion （IFOV） D-6: 6 mrad- D-19: 2 mrad Image frequency* 7.5 Hz NTSC or 8.3 Hz PAL * Focus Fixed Min. focus disctance D-6: 30.5 cm - D-19: 183 cm Pan/Tilt Az Range; Az Velocity 360° continuous; 0.5°/sec to 100°/sec El Range; El Velocity 0° to 90° 0.5°/sec to 100°/sec Programmable presets 32 Auto Scan 1 path: scans linearly between 2 user-defined points Pattern 1 route, up to 200 instructions Auto-flip Enabled Image presentation Video output PAL or NTSC Connector types RS-485, Pelco D Power Requirements 24 V AC +/- 25% Consumption < 20 W Environmental specifications Operating temperature range -10°C to +50°C Humidity < 90% RH, non-condensing. Indoor use only. Must be protected from direct or indirect precipitation or water spray Physical characteristics Camera weight Pendant: 1.6 kg - ceiling mount configuration 3.0 kg Camera size Pendant: 200 mm H, 152 mm ? Ceiling trim ring 279.4 mm ? Shipping weight 5.5 kg Shipping size 38 cm x 38 cm x 48 cm Standard Package Thermal imaging camera, complete ceiling mount kit （trim ring and back housing） user manual | 
