(BEST-121)薄膜體積電阻率測定儀

符合標準：
Meet the standard:
GB/T 1410-2006《 固體絕緣材料體積電阻率和表面電阻率試驗方法》 
GB/T 1410-2006 "solid insulating material volume resistivity and surface resistivity test method"
ASTM D257-99 《絕緣材料的直流電阻或電導試驗方法》 
ASTM D257-99 "DC resistance or conductance of insulating materials test methods"
GB/T 2439-2001《硫化橡膠或熱塑性橡膠 導電性能和耗散性能電阻率的測定》
GB/T 2439-2001 "determination of electrical resistivity and dissipation properties of vulcanized rubber or thermoplastic rubber
GB/T 10581-2006《絕緣材料在高溫下電阻和電阻率的試驗方法》 
GB/T 10581-2006 "insulation material under high temperature resistance and resistivity test method"
GB/T 1692-2008《硫化橡膠絕緣電阻率的測定》 
GB/T 1692-2008 "vulcanized rubber insulation resistivity measurement"
GB/T 12703.4-2010《紡織品 靜電性能的評定 第４部分：電阻率》 
GB/T 12703.4-2010 "textile performance evaluation of fourth parts:" resistivity
GB/T 10064-2006《測定固體絕緣材料絕緣電阻的試驗方法》
Standard Test Method for insulation resistance of solid insulating materials by GB/T 10064-2006
一、概述
I. overview
    薄膜體積電阻率測定儀既可測量高電阻，又可測微電流。采用了美國In公司的大規模集成電路,使儀器體積小、重量輕、準確度高。以雙3.1/2 位數字直接顯示電阻的高阻計和電流。電阻量限從1×104Ω～1×1018 Ω，是目前國內測量范圍zui寬，準確度zui高的數字超高阻測量?jī)x。電流測量范圍為2×10-4 ～1×10-16Ａ。機內測試電壓為100/250/500/1000V任意可調。薄膜體積電阻率測定儀具有精度高、顯示迅速、性好穩定、讀數方便，適用于防靜電產品如防靜電鞋、防靜電塑料橡膠制品、計算機房防靜電活動地板等電阻值的檢驗以及絕緣材料和電子電器產品的絕緣電阻測量。薄膜體積電阻率測定儀除能測電阻外，還能直接測量微弱電流。

The instrument can measure high resistance, and measuring current. The United States In company's large scale integrated circuit, so that the small size, light weight, high accuracy. High resistance meter and current display the resistance 3.1/2 double digits. The amount limit from 1 * 104 to 1 * 1018 Omega Omega, is currently the most wide measuring range, the highest accuracy of digital high resistance measuring instrument. The current measurement range is 2 ~ 1 * 10-16A * 10-4. The test voltage of the machine is 100/250/500/1000V adjustable. The instrument has high precision, good stability, fast display, easy reading, application of insulation resistance measurement in anti-static products such as anti-static shoes, anti-static plastic rubber products, computer room inspection anti electrostatic floor activities such as resistance and insulating materials electrical and electronic products. This instrument can measure the resistance, but also can directly measure the weak current.
二、主要特點
Two, the main features
電阻測量范圍寬  0.01×104Ω～1×1018Ω
A wide range of resistance measurement 0.01 * 104 ~ 1 * 1018.
電流測量范圍為 2×10-4Ａ～1×10-16Ａ
The current measuring range is 2 * 10-4A to 1 * 10-16A
體積小、重量輕、準確度高
Small size, light weight, high accuracy
電阻、電流雙顯示
Resistance, current double display
性能好穩定、讀數方便
Stable performance, easy reading
所有測試電壓(100/250/500/1000V) 測試時電阻結果直讀，免去老式高阻計在不同測試電壓下或不同量程時要乘以系數等使用不便的麻煩，使測量超高電阻就如用萬用表測量普通電阻樣簡便。既能測超高電阻又能測微電流
All the test voltage (100/250/500/1000V) resistance test results reading, replacing the old high resistance meter in different test voltage or different scale should be multiplied by the coefficient of the inconvenient trouble, high resistance as the multimeter is used to measure the general resistance of samples is simple to measure. It can measure both the high resistance and the micro current
三、技術指標
Three, technical indicators
電阻測量范圍    0.01×104Ω～1×1018Ω
Resistance measurement range 0.01 x 104 x ~ 1 x 1018 ohm
電流測量范圍為    2×10-4A～1×10-16A
The current measurement range is 2 * 10-4A ~ 1 * 10-16A
雙表頭顯示    3.1/2位LED顯示
Dual head display 3.1/2 bit LED display
內置測試電壓    100V、250V、500V、1000V
Built in test voltage 100V, 250V, 500V, 1000V
基本準確度    2% (*注)
Basic accuracy 2% (*)
內置測試電壓    100V、250、500、1000V
Built in test voltage 100V, 250, 500, 1000V
使用環境    溫度：0℃～40℃相對濕度<80%
Use ambient temperature: 0 degrees C ~ 40 <80%
供電形式    AC 220V，50HZ，功耗約5W
Power supply form AC 220V, 50HZ, power consumption is about 5W
儀器尺寸    285ｍｍ× 245ｍｍ× 120 mm
The size of 285mm * 245mm * instrument 120 mm
質量    約2.5KG
Mass about 2.5KG
四、工作原理
Four, working principle
        薄膜體積電阻率測定儀根據歐姆定律，被測電阻Rx等于施加電壓V除以通過的電流I。傳統的高阻計的工作原理是測量電壓V固定，通過測量流過取樣電阻的電流I來得到電阻值。從歐姆定律可以看出，由于電流I是與電阻成反比，而不是成正比，所以電阻的顯示值是非線性的，即電阻無窮大時，電流為零，即表頭的零位處是∞，其附近的刻度非常密，分辨率很低。整個刻度是非線性的。又由于測量不同的電阻時，其電壓V也會有些變化，所以普通的高阻計是精度差、分辨率低。
According to Ohm's law, the measured resistance Rx is equal to the current voltage divided by the I V. The traditional working principle of high resistance meter is to measure the voltage V fixed, by measuring the current through the sampling resistor I to get the resistance value. From Ohm's law can be seen as the current I is inversely proportional to the resistance, but not proportional, so is nonlinear resistance display value is infinite resistance when the current is zero, which is zero at the header is infinite, the scale near the very dense, low resolution. The whole scale is nonlinear. And because the measurement of different resistance, the voltage V will also have some change, so the ordinary high resistance meter is the poor accuracy, low resolution.
本儀器是同時測出電阻兩端的電壓V和流過電阻的電流I，通過內部的大規模集成電路完成電壓除以電流的計算，然后把所得到的結果經過A/D轉換后以數字顯示出電阻值，即便是電阻兩端的電壓V和流過電阻的電流I是同時變化，其顯示的電阻值不象普通高阻計那樣因被測電壓V的變化或電流Ｉ的變化而變，所以，即使測量電壓、被測量電阻、電源電壓等發生變化對其結果影響不大，其測量精度很高()，從理論上講其誤差可以做到零，而實際誤差可以做到千分之幾或萬分之幾。
This instrument is the current flowing through the resistor V and the voltage across the resistor I measured at the same time, the large scale integrated circuit to complete the calculation of the internal voltage divided by the current, and then the results obtained after A/D conversion by the digital display of the resistance value, even if the current voltage V and the flow resistance of the two ends of the I is changed at the same time, the resistance value is not displayed as ordinary high resistance meter as a result of changes in the measured voltage or current change of V and I, so even if the measurement voltage, the measured resistance and power voltage change has little influence on the results, the measuring accuracy is very high (patent), according to the theory of the error can do zero, while the actual error can be done a few thousandths or very few.
典型應用
Typical application
1.硫化橡膠體積、表面電阻率測定
1 Determination of volume and surface resistivity of vulcanized rubber
2.測量防靜電鞋、導電鞋的電阻值
2 measure the resistance value of anti-static shoes and conductive shoes
3.測量防靜電材料的電阻及電阻率
3 measure the resistance and resistivity of antistatic material
4.測量計算機房用活動地板的系統電阻值
4 measurement of the resistance value of the movable floor of the computer room
5.測量絕緣材料電阻(率)
5 measure insulation resistance (rate)
6.光電二極管暗電流測量
6 photodiode dark current measurement
7.物理,光學和材料研究
7 physics, optics and materials research
8.高分子材料表面體積電阻率測定
8 surface resistivity measurement of polymer materials
標準配置：
Standard configuration:
主機    1    臺
Host 1
屏蔽箱    1    臺
Shielding box 1
電極    1    套
1 sets of electrodes
測試線+電源線    5    條
Test line + power cord 5
說明書+合格證    2    份
Specification + certificate 2
備注：
Remarks：
薄膜體積電阻率測定儀配不同的測量電極（夾具）可以測量不同材料（固體、粉體或液體）的體積電阻率和表面電阻率或電導率，*符合國家標準GB1410－2006固體電工絕緣材料絕緣電阻、體積電阻系數和表面電阻試驗方法，ASTM D257 絕緣材料的直流電阻或電導試驗方法等標準要求。
The measuring instrument with different electrode (fixture) can measure different materials (solid, powder or liquid) of the volume resistivity and surface resistivity or conductivity, fully meet the national standard GB1410 - 2006 solid electrical insulation insulation resistance, volume resistivity and surface resistance test method of material ASTM, D257 DC resistance or conductance of insulating materials test methods standard.