進口不銹鋼污水泵

進口不銹鋼污水泵采用雙流道葉輪排污能力*，不會因固體顆粒、纖維性雜物的吸入而堵塞，具有很好的耐磨性質，不會因顆粒介質的吸入而過早損壞。是目前國內較*與理想的排水機具。該泵采用旋流式的下吸結構，具有不怕堵塞，耐磨損、運行可靠、維修方便、排水*，適用范圍廣泛等突出優點。排污泵采用先jin的機械密封裝置，使用壽命達8000小時以上。標配彎頭，直接接軟管實現移動式安裝,輕巧方便，也可去掉彎頭實現固定式安裝，或加裝自動耦合裝置實現自動化，大大提高了檢修，維護的便利。

產品產品特點

1、采用*的單葉片式或雙葉片葉輪結構，大大提高了污物通過能力，能有效的通過泵口徑的5倍的纖維物質與直徑為泵口徑約50%的固體顆粒。

2、機械密封采用新型硬質耐腐的碳化鎢作材料，同時將密封改進為雙端面密封，使其*處于油室內運行，可使泵安全連續運行8000小時以上。

3、泵整體結構緊湊、體積小、噪聲小、節能*，檢修方便，無需建泵房，潛入水中即可工作，大大減少工程造價。

4、該泵密封油室內設置有高精度抗干擾漏水檢測傳感器，及定子繞組內預埋了熱敏元器件，對水泵電機保護。

5、可根據用戶需要配備全自動安全保護控制柜，對泵的漏水、漏電、過載及超溫等進行保護，提高了產品的安全性與可靠性。

6、根據客戶使用環境不同可配套浮球開關及配電箱，根據不同水位，不同液位設置，液位浮球裝置自動給予配電箱信息，實現泵的自動起動與停止，不需專人看管，使用極為方便。

7、固定安裝時，可根據用戶需求配套雙導軌自動耦合安裝系統，、人可不必下水拆泵檢修，直接由起吊裝置將水泵順著雙導軌提出水泵，它給安裝、維修帶來*方便

8、此泵能夠在全揚程范圍內安全使用，而保證電機不會過載、超電流。

泵結構緊湊，體積小，移動方便，安裝簡便，無需建泵房，潛入水中即可工作，大大減小工程造價。泵油室內設有油水探頭，當水泵側機械密封損壞后，水進入油室，探頭發生信號，對泵實施保護。可根據用戶需要配備全自動安全保護控制柜，對泵的漏水，漏電，過載及超溫等進行監控，保證泵運行可靠安全。雙導軌自動耦合安裝系統，給泵的安裝的安裝，維修帶來了*的方便，人可不必為此而進出污水坑。浮球開關可根據所需的水位變化。自動控制泵的停啟，無需專人看管。在使用揚程范圍內保證電機運行不過載。根據使用場合電機可采用水套式外第三者循環冷卻系統，能保證電泵在無水(干式)狀態下安全運行。安裝方式有固定式自動耦合安裝和移動式自由安裝二種，可滿足不同的使用場合。

應用領域：

主要用于市政工程、工業排污、樓宇建筑、環保污水處理、廠礦企業污水處理等場合，排送含固形物和長纖維的污水、廢水、河水、江水、井水、雨水

德國巴赫原理：

污水泵采用*的單葉片或雙葉片葉輪結構，大大提高了污物通過能力，能有效的通過泵口徑的5倍纖維物質與直徑為泵口徑約50%的固體顆粒。整體結構緊湊、體積小、噪聲小、節能*，檢修方便，無需建泵房，潛入水中即可工作，大大減少工程造價。

德國巴赫優點：

1.結構緊湊、占地面積小。污水泵由于潛入液下工作,因此可直接安裝于污水池內,無需建造專門的泵房用來安裝泵及機,可以節省大量的土地及基建費用。 　　

2.安裝維修方便。小型的污水泵可以自由安裝,大型的污水泵一般都配有自動藕合裝置可以進行自動安裝,安裝及維修相當方便。 　　

3.連續運轉時間長。污水泵由于泵和電機同軸,軸短,轉動部件重量輕,因此軸承上承受的載荷(徑向)相對較小,壽命比一般泵要長得多。 　　

德國巴赫進口不銹鋼污水泵產品用途：

1適用于建筑工程施工、工礦企業、市政工程等污水處理系統。
2、城市環保系統中排污、污水中繼、污水處理。
3、勘探、礦山配套附機。
4、食品、醫療、海水排吸、船艙積水等污水排放。
5、人防系統排水站、供水設備廠、給排水裝置。
6、農業灌溉、農村沼氣池、養魚、噴泉、噴水等。

*參數：

流量：10-200m3/h 揚程：7-60m
口徑：50-200mm  轉速：1450-2900r/min
功率：0.75-15kw  電壓：220/380V
密封：碳化鎢，雙端面密封 材質：304、316

連接方式：螺紋，法蘭

德國巴赫的服務目標：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

選擇德國巴赫的四大理由：

1：進步性 持續性

 回顧巴赫在中國的快速進步性 每年均高速增長，可預見一家大型的生產銷售企業的建立與發展，也必將在中國的閥門市場乃至機械行業的有所建樹。

2：可靠性

 德國巴赫的可靠性與產品之性能是公司經營理念重要組成部分。如期發貨，持續經營，高質量， 均經過嚴格的全面測驗。 這就是巴赫為何能高速發展，并且能提供越來越好的高質量產品，服務的原因。

3： 價格

 現代化工廠自動化數控生產線確保閥門與其配件價格合理，品質優良。

和持續不斷地投資于人力，設備廠房，為用戶提供性價格比高，品質優良的閥門。

4：客戶價值觀

通過集中采購 可以降低總體的采購成本。

便捷的采購，有助于客戶優化配置人力資源，達到精簡高效。

借助巴赫充足的庫存zui小化客戶的庫存投入。

高品質的閥門將幫助避免因偽劣產品而導致的停產 停工 誤工。

Imported stainless steel sewage pumps

Imported stainless steel sewage pump adopts double channel impeller sewage capacity is extremely strong, not because of solid particles, fibrous sundry suction and congestion, has the very good wear-resisting property, won't because the suction of granules medium and premature failure. Imported stainless steel effluent pump is currently more advanced and ideal drainage equipment in China. The pump adopts rotary downdraft structure, which has the advantages of not fearing blockage, wear-resisting, reliable operation, convenient maintenance, thorough drainage and wide application. The sewage pump adopts the most advanced mechanical sealing device in China, and the service life reaches over 8000 hours. Imports of stainless steel standard elbow, sewage pump directly connect the hose to realize installation, light and convenient, also can remove the elbow to realize fixed installation, installation of automatic coupling device or automation, greatly improving the repair and maintenance convenience.

Characteristics of imported stainless steel sewage pump products

1, adopt unique simple vane or double vane impeller structure, greatly improving the sewage through the ability, can effectively through the pump five times of pump diameter fiber material and about 50% of the solid particles.

2, mechanical seal, using new hard decay resistance of tungsten carbide as material, at the same time will improve as the double end face seal, seal the indoor running in oil for a long time, can make the safe running more than 8000 hours continuously.

3. The overall structure of the pump is compact, small in size, small in noise, remarkable in energy saving, convenient for maintenance, no need to build the pump room, and can work in the water to reduce the project cost.

4. The pump seal oil chamber is equipped with high precision anti-interference leakage detection sensor, and the heat sensitive components embedded in the stator windings, and absolute protection of the pump motor.

5. It can be equipped with automatic safety protection control cabinet according to users' needs, and absolute protection of water leakage, leakage, overload and overtemperature of the pump, which can improve the safety and reliability of the products.

6, according to different customers to use environment can form a complete set of float switch and distribution box, according to different levels, different level Settings, liquid level float device automatically gives information distribution box, realize the automatic start and stop of pump, without modes, use very convenient.

Seven, fixed installation, in accordance with user requirements can be double guide rail automatic coupling installation system, and people can need not water pump maintenance, directly by the lifting device will pump down the double guide rail pump is put forward, which brings very much convenience to installation and maintenance

8. This pump can be used safely within the range of the whole head, while ensuring that the motor is not overloaded and overcurrent.

Imported stainless steel sewage pump applications:

Mainly used in municipal engineering, industrial sewage, building construction, environmental protection, sewage treatment, sewage treatment and other occasions of factories and mines, long fiber and row send containing solids sewage, waste water, river water, river water, well water, rain water

Principle of imported stainless steel sewage pump in BACH BACH, Germany:

Sewage pump adopt unique single vane or double vane impeller structure, greatly improve the through capacity of the contamination, can effectively through the pump fibre material 5 times of pump diameter and about 50% of the solid particles. The overall structure is compact, small volume, small noise, remarkable energy saving effect, easy to overhaul, no need to build the pump room, to dive into the water to work, greatly reduce the project cost.

German BACH BACH imported stainless steel sewage pump advantages:

1. Compact structure and small footprint. The sewerage pump works under the infiltration fluid, so it can be directly installed in the sewage tank without the need to build a special pump room for the installation of pumps and machines, which can save a lot of land and infrastructure costs.  

2. Installation and maintenance is convenient. Small sewage pumps can be installed freely, and large sewage pumps are usually equipped with automatic coupling devices for automatic installation, installation and maintenance.  

3. Long running time. Since the pump and motor are coaxial, the shaft is short, the rotating part is light, so the load on the bearing (radial) is relatively small, which is much longer than the ordinary pump.  

German BACH BACH imported stainless steel sewage pumps for use:

Apply to sewage treatment system such as construction construction, industrial and mining enterprise, municipal engineering and so on.

2. Sewage discharge, sewage treatment and sewage treatment in urban environmental protection system.

3. Exploration and mining supporting equipment.

4. Food, medical treatment, seawater drainage, water and other sewage discharge.

5. Human defense system drainage station, water supply equipment factory, water supply and drainage equipment.

6. Agricultural irrigation, rural biogas pool, fish farming, fountains, water spraying, etc.

Technical parameters of German BACH imported stainless steel sewage pump:

Flow: 10-200m3 / h yangcheng: 7-60m

Caliber: 50-200mm speed: 1450-2900r/min

Power: 0.75-15kw voltage: 220/380v

Seal: tungsten carbide, double end seal material: 304, 316

Connection mode: thread, flange

Germany BACH BACH imported stainless steel sewage pump service target:

The user first, credit first, high quality, perfect after-sales service is an extension of the value of our products and the important guarantee for the interests of the customer, my company's service tenet is: quality management system to establish and constantly improve the scientific, reasonable and efficient service quality management system, fair, accurate and timely complete customer after-sales service quality assurance work, for my company's customer service build good, comprehensive, full service system.

Four big reasons to choose Bach in Germany:

1: progressive sustainability

Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.

2: reliability

The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.

3: price

Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.

And continuously invest in the human resources, the equipment workshop, provide the customers with the high quality and high quality valves.

4: customer values

Centralized procurement reduces overall procurement costs.

Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.

Minimize customer inventory by using Bach's ample inventory.

High quality valves will help to avoid downtime due to shoddy products.