Dr. F.disch

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Price List for PFM

Dust measuring devices Dr. F.disch Umweltmesstechnik AG

Valid from 01.01.2012 to 31.12.2012

Type of device List Price / unit

（€）

Particle Flow Meter PFM 92 C*）

*） validated by authorities for continuous dust emission control

according to TA Luft

consisting of:

Measuring probe

Probe length: 100 - 500 mm （standard 300 mm）

（others on request）

Material: stainless steel

Connection: assembly by means of snap closure

Output: 4 ... 20 mA

Limit value switches

4 measuring ranges for an optimum adaptation to the

respective dust concentration range

Power: 24 V DC , 110 VAC or 230 V AC 50 Hz

Manual （English）

1.890,00

Particle Flow Meter PFM 02*）

*） approved as suitability-tested measuring device for the

continuous dust emission control according to TA Luft

consisting of:

probe with integrated display and control unit in the probe’s

head

Probe length: 300 mm （standard）

（others on request）

Material: stainless steel, insulated

Connection: 1"-socket

Output: 4 ... 20 mA

Limit value switches

4 measuring ranges

numerical or graphic presentation on the display

Power: 24 V DC , 110 VAC or 230 V AC

Manual （English）

2.620,00

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Dr. F.disch

Particle Flow Meter PFM 02 Ex*）

*） approval as measuring device for continuous dust

measurement in area ExII 1/3D IP65 T 74°C

ExII 3G Ex nA IIC T4

consisting of:

probe with integrated display and control unit in the probe’s

head

-length: 300 mm trapezoidal profile （standard） 3.120,00

-Material: stainless steel, insulated

-2 integrated limit value switches, signal threshold adjustable

-4 amplification stages for an optimum adaptation to the dust

concentration range

-voltage: 24 V DC

-output: 4...20 mA, potential-separated

filter diagnosis unit PFM 92K

installed in a case

consisting of:

Probe with preamplifier

Probe length: 50 mm up to 500 mm

Material : stainless steel

Connection cable 5 m

Control unit

with serial interface （RS 232） 6.100,00

4 measuring ranges for an optimum adaptation to the

respective dust concentration range

Electronic recorder inside the case

126 mm graphic display with pulldown-menus and quick-

setup

3 analog inputs

3 ." – disc

software ReadWin

Manual （English）

Dr. F.disch

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Particle Flow Meter PFM 02V*）

*） approved as suitability-tested measuring device for the

continuous dust emission control according to TI Air

with velocity compensation applicable in case of velocity

alterations . +/- 10%

consisting of:

probe with integrated display and control unit in the probe’s

head

Probe length: 300 mm （standard）

Material: stainless steel, insulated

Connection: 1"-socket 6.120,00

Output: 4 ... 20 mA

Limit value switches

4 measuring ranges

numerical or graphic presentation on the display

analogue input （4…20 mA） for recording a signal in

proportion to the velocity

analogue output （4…20 mA） for the output of the velocity

calculated out of the velocity-proportional signal in the

channel

velocity compensation of the dust signal possible

Power: 24 V DC , 110/230 VAC 50Hz

Manual （English）

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Dr. F.disch

Flow Measuring Device FMD 02

（suitable for combination with PFM 02 V）

for gas velocities > 3 m/s

- dynamic pressure probe

material: 1.4571

（standard - ） installation length: 500 mm 2.160,00

- Differential pressure transducer 0-10 mbar linear

- weld-in flange 1“

- Signal output 4 ... 20 mA

- voltage supply: 24 V DC, 110/230 VAC 50Hz

Flow Measuring Device FMD 09

approved as measuring device according to TI Air, 13th, 17th and

27th BImSchV

for measurement of velocity or flow for gas velocities > 5 m/s

consisting of:

Assembly flange with special flange DN 80 PN 6

（standard length 200mm, inner diameter 100 mm

standard material stainless steel）

Dynamic pressure probe

material: 1.4571 5.370,00

（standard） insertion length into the stack: approx. 500 mm

differential pressure transmitter

weld-in flange DN 80 PN 6

ball valves

signal output 4 … 20 mA

for velocity / flow; temperature

voltage supply: 24 V DC, 230 VAC

mounted in a weather protection case （made of GRP）

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Dr. F.disch

Dust Measuring Device PFM 97 W

consisting of:

Probe

with integrated dust sensors,

differential pressure probe and temperature measurement

.p-transmitter and preamplifier for single signals

Connection cable: 5 m （standard）

dimensions probe head: appr. 250 x 350 x 300 mm

immersion depth: appr. 500 mm （others on request）

Control unit

with integrated LCD-display for visualisation of:

10.170,00

dust concentration, gas velocity and temperature

input-display, automatic measuring range selection

voltage: 230 VAC, 50 Hz ; 24 VDC

output: analogue signals 4...20 mA for:

dust concentration normalised,

dust concentration measured,

calibration signal

6 potential free contacts for signalling of:

measuring modes,

limit value violations and

measuring ranges

dimensions: 240 x 310 x 270 mm

Dr. F.disch

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Dust Measuring Device PFM 97ED*）

*） validated by authorities for dust concentration measurement

according to TA Luft, 13th, 17th, 27th BImSchV

especially for applications in wet and/or sticky gases

consisting of:

Probe unit

sampling probe, immersion depth: 500 mm

（standard length, others on request）

sampling tube heated with flange DN 80 PN 6

injector pump for suck off measuring gas

monitoring of gas flow

triboelectric sensor with electronic unit

plug connections to control unit

weather protection case IP 65

Frame with evaluation unit

Dimensions: 600 x 1700 x 500 mm

Degree of protection: IP 65 27.450,00

Power supply: 3 ~ 400 V / 50 Hz

Fuse: 16 A

equipped and ready for installation wired with:

Evaluation unit

with integrated LCD – Display for display of

dust concentration, gas flow and heating

temperature,

analogue outputs 4-20 mA for dust concentration

and calibration signal

floating contacts for

maintenance,

failure,

limit values and

maintenance request

Voltage and signal distribution

to the control of the beforehand specified devices

2 side channel blowers

for operating the injector pump and supplying dilution

air

Umweltmesstechnik AG

Zwenkauer Stra.e 159, D-04420 Markranst.dt

T. +49-34205-755-0, F. +49-34205-755-40

www.foedisch.de

Dr. F.disch

Dust Concentration Measuring Device PFM 06ED

*） validated by authorities for dust concentration measurement

according to TA Luft, 13th, 17th, 27th BImSchV

especially for applications in wet and/or sticky gases

Consisting of:

Probe unit

sampling probe at heated tube, total length: 1.000 mm

immersion depth: 800 mm

injector for conveying of measuring gas

flow monitoring

scattered-light sensor

plug connections to the control unit being easy to maintain

weather protection case IP 65

dilution air with heating

Frame with evaluation unit

Dimensions: 600 x 1700 x 500 mm

（W x H x D）

Degree of protection: IP 65

34.600,00

Connection voltage: 3 ~ 400 V / 50 Hz

with N and PE

Fuse: 16 A

equipped and wired being ready for installation with:

Evaluation unit

with integrated LCD – Display for display of

dust concentration, flows and heating temperature,

analogue outputs 4-20 mA for dust concentration

and calibration signal as well as 2 freely-assignable

analogue

outputs （e.g. temperature, flow）

potential-free contacts for maintenance, failure,

limit values and maintenance request

Voltage and signal distribution

for the control of the beforehand specified devices

2 side channel blowers

for the operation of the injector and

the supply of dilution air