非線性節點探測器ORION TOOL KIT25件工具組供應商同美NJE4000/HGO4000非線性節點探測器配套使用。
Flexible wand – Attach magnet (item #3) to retrieve items from hard-to-reach places. Or attach mirror (item #4) to see around cor
ORION TOOL KIT25件工具組供應商
同美NJE4000/HGO4000非線性節點探測器配套使用。
ORION TOOL KIT25件工具組供應商Flexible wand – Attach magnet (item #3) to retrieve items from hard-to-reach places. Or attach mirror (item #4) to see around corners.
Extender – Attach magnet or mirror to extend their reach.
Magnet – Attach to extender (item #2) or wand (item #1) to retrieve metal objects from hard-to-reach places.
Mirror – Attach mirror to extender (item #2) or wand (item #1) to see around corners.
UV Pen – Mark screws with UV pen. During next sweep, check with UV light (item #7) to see if any screws have been tampered with since you marked them.
Dental mirror – Permits seeing around objects in tight places such as computer cabinets.
UV Light – Use UV light to check the marks made with UV pen, to see if anyone has tampered with equipment since last sweep.
Streamlight – Powerful compact flashlight.
Borescope and sleeve – Drill a small hole in a wall, insert borescope with sleeve extended to cover tip while going through the wall. Retract the sleeve, then view inside of wall to find hidden electronics. (Without the sleeve, the mirror at the tip of the borescope is very easy to damage or cover with dust while inserting the scope into a wall.)
Tape Measure – Both metric and English-unit scales.
Multi-tool – Knife, screwdrivers, pliers, can opener, and other tools in one package.
Strippers, Wrench, and Pliers –Strippers cut and trim wires 16 to 26 AWG; adjustable wrench fits up to 7/8”; long-nose pliers.
Over-driver – Racheting driver contains a set of driver bits in the handle.
Small Screwdrivers – Flat-blade and Phillips
Accessories Pouch 1 – Contains cleaning kit for borescope and mirrors, ¼” drill bit (use with Overdriver to drill holes for borescope), and 3/32” short-arm hex key
Accessories Pouch 2 – Torx bits and nut-driver bits for use with Overdriver (item #13)
Line-tracer Probes – Use with Line Tracer (item #19).
Multimeter Probes – Use with Multimeter (item # 23).
Line-tracer – Follow the path of any conductor through walls, from office to office, etc.
Hammer – Interchangeable tips minimize damage to sensitive surfaces or components
Pry Bar – Pull nails or loosen boards.
Punch-down tool – Re-insert wires in ephone exchange block
Multimeter – Check voltages, current, resistance, etc.
Stud Finder – Locates wooden or metal studs within walls.
Batteries and Accessories Pouch – Contains lithium 3V (2), alkaline AA 1.5V (2), and alkaline 9V (2)