好爽又高潮了毛片免费下载,国产97在线 | 亚洲,亚洲一区二区三区AV无码,特级AAAAAAAAA毛片免费视频

EBBS-60A兩級跑偏開關,跑偏傳感器廣泛用于冶金、煤炭、水泥建材、采礦、電力、港埠、冶金、化工等領域的各種帶式輸送設備。        

EBBS-60A兩級跑偏開關廠家

EBBS-60A兩級跑偏開關服務

應用范圍

常規皮帶輸送機，包括平皮帶輸送機和槽形皮帶輸送機

地下、索道支撐皮帶輸送機

輪船裝卸系統、堆取料輸送機

技術參數

工作電壓：24VDC

接點容量：2個SPDT 400VAC 10A

一級報警：20° 二級報警：35°

側面滾輪傾斜角度：≤75°

防護等級：IP67

環境溫度：-20℃～+80℃

電纜入口：4*M20*1.5

電纜規格：6~12mm

產品特點

具有地址編碼，內置RS485總線收發器

通訊波特率可編碼

的ModBus-RTU通訊協議

機械觸點，沒有誤動作

堅固的鑄鋁外殼、靜電防腐涂裝適應于惡劣工礦環境安裝

防護IP67在惡劣環境也可使用;使用性能的微動開關和無需維護的滾珠軸承，耐久性

動作桿軸承額定轉速5000轉⁄分，適用皮帶速度6.35米⁄秒

側面滾輪zui大傾斜角度75度，因此輸送帶發生異常偏離時保護開關也會準確動作

EBBS-60A兩級跑偏開關,跑偏傳感器適用于皮帶輸送機，能使皮帶輸送機在皮帶跑偏將導致嚴重掛邊磨損甚至發生撕裂事故前就發出報警信號以及進一步的自動停車。

能及時有效的保護設備安全、避免事故擴大化，達到保障、保護設備的目的。另外由于信號可發送至控制系統，方便實現工廠自動化控制，因此又可達到減員增效，集中控制，利于與調度的目的。

注意事項

1、跑偏開關檔輪與皮帶保持垂直。

2、建議跑偏開關擋輪與皮帶邊緣距離保持120-160mm。

3、跑偏開關底座固定牢固。

訂貨須知 

1、 選配件：安裝支架。

安裝說明

1、兩級跑偏開關底座兩邊各有Ф12mm孔，在皮帶機旁角鐵架鉆Ф12mm孔，用M10×30mm螺絲緊固跑偏開關。

2、安裝跑偏開關應選擇輸送裝置易出現跑偏的位置處安裝，參考應用單位工藝要求，同時要考慮皮帶與擋輪的有效間距和推力，建議皮帶與檔輪間的安裝距離為120-160mm。

3、安裝距離：建議每50米安裝一對跑偏開關。

4、跑偏開關出廠時配有長度0.5米四芯橡套電纜，芯線上配有1、2、3、4線號，其中1、2為常開接點是一級報警信號，3、4為常閉接點是二級停機信號。

廣泛應用于機械、機床制造業及食品廠、紡織、造紙、輕工、化工、礦山、冶金、航空工業、電力保安、汽車工業、船舶交通運輸、建筑、地鐵等各行各業，作光源、限位、定位檢測，自動計數，測速，自動保護，工業自動流水線及微機信號，數控裝置等應用，對提自控系統性和可靠性，具有巨大作用。

Ebs-60a is a two-stage running offset switch, which is widely used in various belt conveyors in metallurgy, coal, ment building materials, mining, electric power, port, metallurgy and chemical industries.
EBBS-60A two - stage deviation switch manufacturers.
EBBS-60A two - level running offset switch quality servi.
Range of application
Conventional belt conveyor, including flat belt conveyor and trough belt conveyor.
Underground and cable support belt conveyor.
Ship loading and unloading system, piling conveyor.
Technical parameters
Working voltage: 24VDC.
Contact capacity: 2 SPDT 400VAC 10A.
Secondary alarm level alarm: 20 ° 35 °
The scroll wheel Angle: 75 ° or less
Protection grade: IP67.
Ambient temperature: - 20 ℃ ~ + 80 ℃
Cable entran: 4*M20*1.5.
Cable specification: 6~12mm.
Product features
With address code, built-in RS485 bus transiver.
Communication baud rate can be encoded.
Standard modbus-rtu communication protocol.
Mechanical contact, no mperation.
Strong cast aluminum shell, electrostatic anticorrosion coating suitable for the installation of harsh industrial and mining environment.
Protection standard IP67 is also available in harsh environments; Exllent durability with high performan micro - switch and non - maintenan ball bearings.
Action bar bearing rated speed of 5000 RPM, applicable belt speed 6.35 m.
The maximum tilt Angle of the side roller is 75 degrees, so the protection switch will also be accurate when the conveyor belt is abnormal.
EBBS - 60 switch, a two-stage wandering wandering sensor suitable for belt conveyor, can make the belt conveyor at the edge of the belt run hang PianJiang cause serious wear and tear accident before they can send out alarm signals and further automatic parking.
To ensure the safety of the equipment and avoid the expansion of the accident in time, so as to ensure the production and protection of the equipment. In addition, because the signal can be sent to the control system, it is convenient to realize the automatic control of the factory, so it can achieve the efficiency of reducing staff, ntralize control, and facilitate the production and scheduling.
Matters needing attention
1. The deviation switch gear is vertical to the belt.
2. It is suggested that the distan between the steering wheel and the belt edge should be kept 120-160mm.
3. The base of the deviation switch is fixed firmly.
Ordering instructions
1. Optional acssories: mounting bracket.
Installation instructions
1, two levels of running deviation switch base Ф 12 mm hole on each side, near the belt conveyor Angle iron frame Ф 12 mm holes, using switch M10 x 30 mm screw fastening wandering.
2, installation running deviation switch should choose conveyer prone location of installation and application referen unit pross requirement, at the same time to consider effective spacing and thrust belt and catch wheel, it is recommended that the installation of the belt between the gear wheel and a distan of 120-160 - mm.
3. Installation distan: it is recommended to install a pair of running deviation switch every 50 meters.
4, running deviation switch factory is equipped with four core cabtyre cable length 0.5 meters, the core is equipped with a no., 2, 3, 4 line, which is suitable for normally open contacts are level 1, 2, alarm signal, 3, 4 for the normally closed contact is secondary stop signal.
EBBS - 60 switch, a two-stage wandering wandering sensors are widely used in machinery, machine tool manufacturing and food factory, textile, paper making, light industry, chemical industry, mining, metallurgy, aviation industry, electric power security, the automotive industry, Marine transportation, building, subway and so on all walks of life, as a light sour, spacing, positioning detection, automatic counting, speed, automatic protection, industrial automatic production lines and microcomputer signal, nc devi applications, such as to improve the autonomous system advanment and reliability, has a huge role.