產品名稱: PE系列標準孔板流量計
產品型號: PE系列
PVC孔板用于氣體
產品介紹
The Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE is available in line sizes from 1/2" to 24" and used for air and most gases. It meets or exceeds ASME, AGA & ISO standards.
技術參數
介質： Clean air and compatible gases.
材質： Monolithic （single piece） constructed entirely of gray PVC, Buna-N gaskets.
精度： ±0.6% full scale flow. （Beta= .2-.6） ±0.7% for Beta greater than .6.
溫度： 140°F （60°C） max.
壓力： 150 psi （10 bar） max.
壓損： 1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.
尺寸： 1/2" to 24".
連接： 1/4" female NPT.
安裝： Standard flange 125#/150# rating.
管路： General requirements 10 diameter upstream and 5 diameter downstream.
重量： Varies with line size. See Catalog page.
選型：
1/2" 到24"，請咨詢我司。
