產品標題:531X301DCCAFG2用于主驅動器 

型號： 531X301DCCAFG2

品牌：GE

                                                                                 產品詳情資料：

對齊目標方向1.選擇要更改其方向的目標。2.單擊“對齊目標方向"以打開對話框。3.在“參考"框中，通過首先在框中單擊，然后從圖形視圖或布局瀏覽器中選擇目標，***要將其方向用作參考的目標。4.在“對齊軸"框中，選擇要將其方向從參考目標復制到選定目標的軸。5.在“鎖定軸"框中，選擇要旋轉目標的軸。此軸的方向不會在目標上更改。例如，如果所有目標的Z軸方向垂直于工件表面，并且希望保持此方向，則應鎖定Z軸。6.單擊應用。

對齊目標方向1.選擇要更改其方向的目標。2.單擊“對齊目標方向"以打開對話框。3.在“參考"框中，通過首先在框中單擊，然后從圖形視圖或布局瀏覽器中選擇目標，***要將其方向用作參考的目標。4.在“對齊軸"框中，選擇要將其方向從參考目標復制到選定目標的軸。5.在“鎖定軸"框中，選擇要旋轉目標的軸。此軸的方向不會在目標上更改。例如，如果所有目標的Z軸方向垂直于工件表面，并且希望保持此方向，則應鎖定Z軸。6.單擊應用。

                          產品英文詳情資料：

Aligning target orientation 1. Select the targets whose orientation you wish to change. 2. Click Align Target Orientation to bring up a dialog box. 3. In the Reference box, specify the target whose orientation you want to use as reference, by first click in the box and then selecting the target either from the graphics view or the Layout browser. 4. In the Align Axis box, select the axis whose orientation you want to copy from the reference target to the selected ones. 5. In the Lock Axis box, select the axis to rotate the target around. The orientation of this axis will not be changed on the targets. For example, if the Z axis of all targets are orientated normally to the surface of the work piece and you want to keep it this way, you should lock the Z axis. 6. Click Apply.

Aligning target orientation 1. Select the targets whose orientation you wish to change. 2. Click Align Target Orientation to bring up a dialog box. 3. In the Reference box, specify the target whose orientation you want to use as reference, by first click in the box and then selecting the target either from the graphics view or the Layout browser. 4. In the Align Axis box, select the axis whose orientation you want to copy from the reference target to the selected ones. 5. In the Lock Axis box, select the axis to rotate the target around. The orientation of this axis will not be changed on the targets. For example, if the Z axis of all targets are orientated normally to the surface of the work piece and you want to keep it this way, you should lock the Z axis. 6. Click Apply.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。