Stick rubber water-stop is also called the back check bailey, hose or external type is a kind of underground structures concrete deformation cracks, settlement joint lateral wall plate (into the water) set up a water stop structure, has in the form of elastic material and the structure of the ability to adapt to the deformation of concrete expansion.
From material selection to differentiate can be divided into rubber water-stop is stuck outside, outside the post check bailey, plastic outside hose joints and buried in the water swelling water-stop, etc. From the structure of the form can be divided into EB water-stop and EP water-stop two kinds. It is worth noting because the check is stuck outside hose set in concrete surface, often in the process of construction requirements and waterproof plate welding seal, so in this case should be chosen with waterproof material of the same type water stop is stuck outside (such as EVA waterproof board choose EVA type water stop is stuck outside), the other type is stuck outside water stop after use, should be paid attention to during the backfill concrete wall lateral external stick to check the protection of the hose.
Check is stuck outside hose price - check is stuck outside hose specifications, common specifications, 300 * 300 * 350 * 8 August 8 the water stop material has good flexibility, abrasion resistance, aging resistance and tear resistance, deformation ability strong, waterproof properties is good, adapt to temperature range of - 45 ℃ - + 60 ℃. When the temperature exceeds 70 ℃, and rubber water-stop with strong oxidation or corroded by oil and other organic solvents, shall not use rubber water-stop.
Stick rubber water-stop is using high elasticity of rubber, produce elastic deformation under various load, so as to play a strong sealing, effectively prevent leakage of building structure, water seepage and shock absorption effect. In many engineering and construction design, civil engineering, water and soil structure has a certain scale, and some problems such as waterproof shockproof, so use and install rubber water-stop is effective means to solve the above problems. When this product is mainly used for cast-in-situ concrete in construction joint and deformation joint, and become one of the basic engineering concrete structure, underground facilities, tunnels culvert, water conveyance aqueduct, retaining dam, etc., to ensure the service life of the project construction. In rubber water-stop installation, if found the concrete pouring process of some or all of the buried in the concrete, concrete has a lot of the stones and sharp Angle steel head, because of the plastic and rubber tearing three to five times lower than strong tensile strength, water stop once punctured or tear, does not need much outside force gap will expand, so in the process of water stop positioning and concrete is poured concrete, attention should be paid to cast positioning method and stress, in order to avoid water stop punctured.