現貨BECKHOFF現貨EL2008
EL2008 面議通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
上海勇控自動化設備有限公司
會員1.png)
上海勇控自動化設備有限公司
| 參 考 價 | 面議 |
產品型號CX5120/CX5130
品 牌
廠商性質經銷商
所 在 地上海市
聯系方式：文志勇查看聯系方式
更新時間：2017-06-13 20:28:07瀏覽次數：5541次
聯系我時，請告知來自 智慧城市網BECKHOFF工控機CX5120/CX5130
上海勇控自動化設備主營PILZ皮爾茲安全繼電器，BECKHOFF倍福模塊，SICK，HUBNER編碼器，公司駐德國有辦事處，一手貨源，*，選購。：文，：，，:
CX5120, CX5130 and CX5140 are Embedded PCs from the CX5100 series based on the In®Atom™ multi-core processors. They differ from one another in housing width and CPU type. What is new is that the available Atom™ CPUs now also introduce genuine multi-core technology, extending up to quad-core, into the compact Embedded PC segment. Since the new devices are an extension of the existing CX5000 series, they are equipped with identical hardware interfaces. Two independent Gigabit-capable Ethernet interfaces as well as four USB 2.0 and one DVI-I interface are available. A multitude of further connection options and gateway functions is created by the multi-option interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-Bus or K-Bus Terminals.
All devices in the series are characterised by low power consumption and fanless design.
Depending on the installed TwinCAT runtime environment, the CX5100 can be used for implementing PLC or PLC/Motion Control projects with or without visualisation. The execution of Motion Control applications with interpolating axis movements is also possible.
The extended operating temperature range from -25 to +60 °C enables the use of the CX5100 Embedded PCs in climatically demanding environments.
Like the CX5000, the CX5100 series has a compact design; a modular device with extension modules like in the CX2000 series is not available.
The order number for CX5100 units can be derived as follows:
| Technical data | CX5120 | CX5130 | CX5140 |
|---|---|---|---|
| Processor | processor In®Atom™ E3815, 1.46 GHz, 1 core (TC3: 40) | processor In®Atom™ E3827, 1.75 GHz, 2 cores (TC3: 40) | processor In®Atom™ E3845, 1.91 GHz, 4 cores (TC3: 50) |
| Flash memory | slot for CFast card (card not included), slot for microSD card | ||
| Internal main memory | 2 GB DDR3 RAM (not expandable) | 4 GB DDR3 RAM (not expandable) | 4 GB DDR3 RAM (not expandable) |
| Persistent memory | integrated 1-second UPS (1 MB on CFast card) | ||
| Interfaces | 2 x RJ45, 10/100/1000 Mbit/s, DVI-I, 4 x USB 2.0, 1 x optional interface | ||
| Diagnostics LED | 1 x power, 1 x TC status, 1 x flash access, 2 x bus status | ||
| Clock | internal battery-backed clock for time and date (battery exchangeable) | ||
| Operating system | Microsoft Windows Embedded Standard 7 P | ||
| Control software | TwinCAT 2 PLC runtime or TwinCAT 2 NC PTP runtime | ||
| I/O connection | E-bus or K-bus, automatic recognition | ||
| Power supply | 24 V DC (-15 %/+20 %) | ||
| Current supply E-bus/K-bus | 2 A | ||
| Max. power loss | 9 W (including the system interfaces) | 11 W (including the system interfaces) | 12 W (including the system interfaces) |
| Dimensions (W x H x D) | 124 mm x 100 mm x 92 mm | 142 mm x 100 mm x 92 mm | 142 mm x 100 mm x 92 mm |
| Weight | approx. 860 g | approx. 960 g | approx. 960 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C | ||
| Relative humidity | 95 %, no condensation | ||
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | ||
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | ||
| Protection class | IP 20 | ||
| Approvals | CE, UL | ||
| TC3 performance class | performance (40); please see here for an overview of all the TwinCAT 3 performance classes | performance (40); please see here for an overview of all the TwinCAT 3 performance classes | performance plus (50); please seehere for an overview of all the TwinCAT 3 performance classes |
| Ordering information | no operating system | Windows Embedded Standard 7 P 32 bit | Windows Embedded Standard 7 P 64 bit | optional TwinCAT 3 | TwinCAT 2 PLC runtime | TwinCAT 2 NC PTP runtime | TwinCAT 2 NC I runtime |
|---|---|---|---|---|---|---|---|
| CX5120-0100 | x | – | – | – | – | – | – |
| CX5120-0120 | – | x | – | x | – | – | – |
| CX5120-0121 | – | x | – | – | x | – | – |
| CX5120-0122 | – | x | – | – | – | x | – |
| CX5120-0123 | – | x | – | – | – | – | x |
| CX5120-0130 | – | – | x | x | – | – | – |
| CX5130-0100 | x | – | – | – | – | – | – |
| CX5130-0120 | – | x | – | x | – | – | – |
| CX5130-0121 | – | x | – | – | x | – | – |
| CX5130-0122 | – | x | – | – | – | x | – |
| CX5130-0123 | – | x | – | – | – | – | x |
| CX5130-0130 | – | – | x | x | – | – | – |
| CX5140-0100 | x | – | – | – | – | – | – |
| CX5140-0120 | – | x | – | x | – | – | – |
| CX5140-0121 | – | x | – | – | x | – | – |
| CX5140-0122 | – | x | – | – | – | x | – |
| CX5140-0123 | – | x | – | – | – | – | x |
| CX5140-0130 | – | – | x | x | – | – | – |
| Accessories | |
|---|---|
| CX1900-0101 | DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface). |
| CX2900-00xx | CFast cards: 2, 4, 8, 16, 32 GB CFast card |
| Optional interfaces | |
|---|---|
| CX5120-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5120-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5120-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5120-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5120-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5120-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5120-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5120-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5120-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5120-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5120-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5120-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5120-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5120-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5120-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX5130-N010 | DVI-D interface, additional DVI-D port for clone or extended desktop operation |
| CX5130-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5130-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5130-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5130-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5130-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5130-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5130-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5130-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5130-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5130-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5130-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5130-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5130-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5130-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5130-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX5140-N010 | DVI-D interface, additional DVI-D port for clone or extended desktop operation |
| CX5140-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5140-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5140-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5140-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5140-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5140-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5140-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5140-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5140-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5140-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5140-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5140-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5140-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5140-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5140-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
Product announcement | CX51x0-B950: estimated market release 1st quarter 2016 |
Beckhoff 嵌入式 PC
BECKHOFF工控機CX5120/CX5130 BECKHOFF工控機CX5120/CX5130
模塊化安裝于 DIN 導軌的工業 PC
隨著 CX 系列嵌入式 PC 的推出，Beckhoff 將 PC 技術和 I/O 級模塊化技術相結合，構成一種可以安裝于控制柜中的 DIN 導軌單元。該設備系列結合了工業 PC 和硬件 PLC 環境，適用于中等規模的控制任務。可以根據現有任務對模塊化控制系統進行配置，并將其安裝在控制柜或端子盒中。
CX 系統在價格和性能上涵蓋了 Beckhoff的所有控制技術。該產品系列是為那些需要有工業 PC 的特性和計算能力，但由于項目預算有限又不打算購買全套工業 PC 機的客戶而設計。配置該系統時，用戶只需訂購實際所需的組件。例如，CX 能夠在“無頭”模式中運行，即無顯示器和鍵盤；這種情況下，就無需配置相關的接口。
可升級的性能等級
CX 系列產品有多種可選的基本 CPU 模塊，分別配備有不同的處理器，可以滿足各個控制任務的需求：
CX1030: 帶 In® Pentium® M CPU，1.8 GHz 處理器的高性能 CX
CX1020: 帶 In® Celeron® M ULV CPU 和 1 GHz 處理器的高性能 CX
CX1010: 帶 Pentium® MMX-compatible CPU 和 500 MHz 處理器的基本CX
CX9010: 帶 In® IXP420 XScale® 技術和 533 MHz 處理器的以太網控制器器
CX9000: 帶 In® IXP420 XScale® 技術和 266 MH z處理器的以太網控制器
除了多種型號的 CPU 之外，不同 CX型號的系統接口模塊和電源模塊也不同。通過相應的 I/O接口，CX1030、CX1020、CX1010、CX9000 和 CX9010 既可連接 Beckhoff 總線端子模塊，也可以連接 EtherCAT 端子模塊作為 I/O 系統。
組件
CX 系列的系統模塊通過標準的 PC/104 總線（16 位）相互連接。每個系統組件都由寬度為 19 毫米（單模）或 38 毫米（雙模）的單個模塊構成，這些模塊可以依次連接。CX1030、CX1020 和CX1010 的基本單元包括 CPU 模塊和電源模塊。CX9000 和 CX9010 系列則將 CPU 和電源集成于一體。根據 CX 型號的不同，控制器可通過更多的系統接口加以擴展。用于 PROFIBUS、CANopen、DeviceNet、SERCOS interface 和 Lightbus 的現場總線接口擴充了可選模塊的種類，其中又分主站和從站接口。
軟件
結合 TwinCAT 自動化軟件，CX 嵌入式 PC 成為一個功能強大的 IEC61131-3 PLC，它還可以操控運動控制任務。根據所需的周期時間不同，它可以控制多個伺服軸。CX1010、CX1020或 CX1030 甚至還可以實現特殊的功能，比如“飛鋸”、“電子齒輪箱”或“電子凸輪”等。CX 因而成為一個用單個硬件實現 PLC、運動控制和可視化任務的控制器。在 Windows CE 平臺下，借助于操作系統的實時能力，以高級語言編寫的用戶任務可以在 TwinCAT 運行的情況下實時得到處理。
應用范圍廣
由于工業 PC良好的設計和優異的功能，嵌入式 PC 可以得到廣泛應用。現有的應用包括機械制造（自動化鋸床、自動裝配機、切紙機、旋鑿控制、包裝機、金屬板材加工、物流輸送設備）、過程工藝（水處理、發電、能耗監測）、樓宇控制（寓所控制、門禁控制）等等。
自動化標準
T采用 Beckhoff 總線端子后，可把控制柜和安裝端子的端子盒設計得更加經濟。通過采用 4 線制端子系統，各種信號的傳感器和執行機構都可以直接連接，而無需其它連接系統。現場設備無需像以往那樣在控制柜（或端子盒）與控制器之間作點對點的連接，這樣可大大減少控制器的設計成本，節約空間、材料、工程量和資金。
現場設備可以通過 Beckhoff 總線端子系統在產生信號的現場進行連接，因此對 Beckhoff 總線端子的安裝和布線就像標準端子排那樣簡易和緊湊。總線端子與控制器之間通過一個現場總線耦合器連接。
Beckhoff 總線端子已在許多領域得到了測試和驗證，從機械制造到樓宇控制。采用 Beckhoff 總線端子，可使設計、基建、布線、調試安裝以及對系統和設備的維護和維修變得更加經濟。
PC 現場總線接口卡
基于 PCI 的 PC 現場總線接口卡適用于 Lightbus、PROFIBUS、CAN¬open、DeviceNet、SERCOS 接口和以太網系統，該系列總線接口卡進一步完善了 Beckhoff 現場總線組件產品，專為快速控制和實時任務（如驅動器位置控制）而開發，因而得到廣泛的應用。為了適應不同的需求，接口卡都配有一個或兩個現場總線通道。以太網接口卡 FC9004 總共有 4 個通道。若將這種功能強大的 PC 現場總線接口卡與 TwinCAT 軟件 PLC 和 NC 結合起來，其功能優勢是顯而易見的。這種智能化 PCI 接口卡是在其自身的處理器上高效處理現場總線協議，因此也可用于其它應用場合。通過 DPRAM 接口可將過程映像傳送到 PC 上。TwinCAT I/O 軟件包可提供用于 Windows NT/2000/XP/Vista 的驅動程序和配置工具。用高級語言編寫的程序采用的是 DLL（動態連接庫），對 Visual Basic 應用程序則可提供 ActiveX 接口。帶有 OPC 接口的應用程序可以通過 OPC 服務器訪問過程數據和參數。
所有接口卡都“濃縮”了現場總線的專有技術，具有以下特點：
· 快速數據交換，循環時間短（例如 Lightbus 的循環時間為：< 50 μs）
· 過程數據通訊可任意傳輸、同步傳輸、延時傳輸或等時同步傳輸
· 功能強大的參數和診斷接口
· 對任何設備均可進行自由組態的總線管理
迷你 PCI 現場總線接口卡
新型迷你 PCI 接口卡適用于 PROFIBUS、CANopen、DeviceNet、SERCOS 接口和以太網總線，延伸了 Beckhoff 的 PC 現場總線接口卡產品范圍。與 Beckhoff 標準的 PCI 接口卡一樣，這種接口非常適用于快速控制器和實時任務。
新一代的 Beckhoff 工業 PC，包括控制柜 PC C69xx 和面板型PC CP62xx/CP66xx 設計都非常緊湊。每個設備都配有兩個以太網端口，它們是用于以太網以及基于 EtherCAT 的控制應用場合的高性能工業 PC 的典型代表。工業 PC 可以隨意通過迷你 PCI 接口卡或現場總線技術進行擴展。現場總線接口卡上不帶總線接口，而是通過電纜引到設備的外殼上（視設備而定）。
工控機 CX系列
CX9000-0000 CX9000-0001
CX9001-0000 CX9001-0001
CX9001-0100 CX9001-0101
CX9000-1000 CX9000-1001
CX9001-1000 CX9001-1001
CX9001-1100 CX9001-1101
CX9010-0000 CX9010-0001
CX9010-0002 CX9010-0100
CX9010-0101 CX9010-0102
CX9010-1000 CX9010-1001
CX9010-1002 CX9010-1100
CX9010-1101 CX9010-1102
CX9010-N010 CX9010-N030
CX9010-N031 CX9010-A001
CX1000-0010 CX1000-0011
CX1000-0012 CX1000-0110
CX1000-0111 CX1000-0112
CX1001-0000 CX1001-0010
CX1001-0011 CX1001-0012
CX1001-0020 CX1001-0021
CX1001-0022 CX1001-0100
CX1001-0110 CX1001-0111
CX1001-0112 CX1001-0120
CX1001-0121 CX1001-0122
CX1000-N001 CX1000-N002
CX1000-N003 CX1000-N005
CX1010-0000 CX1010-0010
CX1010-0011 CX1010-0012
CX1010-0020 CX1010-0021
CX1010-0022 CX1010-0100
CX1010-0110 CX1010-0111
CX1010-0112 CX1010-0120
CX1010-0121 CX1010-0122
CX1010-N010 CX1010-N020
CX1010-N030 CX1010-N040
CX1010-N031 CX1010-N041
CX1010-N060 CX1010-A001
CX1020-0000 CX1020-0010
CX1020-0011 CX1020-0012
CX1020-0013 CX1020-0100
CX1020-0110 CX1020-0111
CX1020-0112 CX1020-0113
CX1020-0020 CX1020-0021
CX1020-0022 CX1020-0023
CX1020-0120 CX1020-0121
CX1020-0122 CX1020-0123
CX1020-N010 CX1020-N020
CX1020-N030 CX1020-N040
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
