好爽又高潮了毛片免费下载,国产97在线 | 亚洲,亚洲一区二区三区AV无码,特级AAAAAAAAA毛片免费视频

行業產品

  • 行業產品

廊坊迪森保溫建材有限公司


當前位置:廊坊迪森保溫建材有限公司>>西門子PLC>>西門子6EP1933-2NC11電源

西門子6EP1933-2NC11電源

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號基本單元10 KWs

品       牌

廠商性質經銷商

所  在  地上海市

聯系方式:彭勇查看聯系方式

更新時間:2017-12-07 20:36:03瀏覽次數:153次

聯系我時,請告知來自 智慧城市網

經營模式:經銷商

商鋪產品:499條

所在地區:

聯系人:彭勇 (銷售)

產品簡介

西門子6EP1933-2NC11電源
上海地友自動化設備有限公司只銷售西門子原裝*,享受西門子免費一年保修(部分產品可換新)本店可簽訂銷售合同,并可開百分之十七的增值稅發票,稅點另算。(部分產品圖片并非實況)具體情況請客戶!實體公司出銷請放心購買!

詳細介紹

西門子6EP1933-2NC11電源

西門子6EP1933-2NC11電源

工作

   上海地友自動化設備有限公司只銷售西門子原裝*,享受西門子免費一年保修(部分產品可換新)本店可簽訂銷售合同,并可開百分之十七的增值稅發票,稅點另算。(部分產品圖片并非實況)具體情況請客戶!實體公司出銷請放心購買! 只要您相信我,就算你要的貨我沒有,我給您找遍中國 也給您找到。

 

用于控制箱的薄型電源

單相 SITOP compact 是滿足低端性能要求的電源。它們具有極為節省空間的緊湊設計,尤其適合控制箱或小型控制柜內的分布式應用。此系列電源的特點是在整個負載范圍具有較低功耗。空載運行期間的功耗極低,非常適合為頻繁處于待機模式的機器設備供電。SITOP PSU100C 電源具有較寬輸入范圍,適用于交流和直流電網;插入式端子促進了電纜連接。

要進一步提高 24 V 電源的可用性,可將 SITOP compact 電源與 DC UPS冗余選擇性模塊結合使用。

主要產品亮點

  • 24 V DC/ 0.6 A、1.3 A、2.5 A 和 4 A 以及 12 V DC/ 2 A 和 6.5 A
  • 24 V DC/3.7 A,用于通過有限的輸出功率 (100 VA) 為 NEC Class 2 電路供電
  • 單相,輸入范圍寬,適用于 85 V 至 264 VAC 或 110 V 至 300 VDC
  • 因薄型設計而具有較小安裝表面
  • 在整個負載范圍內保持高效率:與類似設備相比,可節約電能高達 28 %
  • 空載運行或待機期間的電能消耗很低:可實現高達 53 % 的電能節約
  • 可調輸出電壓用來補償電壓降
  • 綠色 LED 指示“輸出電壓正常”狀態
  • 通過插入式連接端子進行預制接線和快速電氣連接
  • 溫度范圍寬,-20 ~ +70℃
  • 通過全面認證,如 UL、ATEX 或 GL

    配電盤用扁型電源

    我們的新型微型電源單元與邏輯模塊采用了相同的設計,以zui小的體積提供了zui大的性能:提高了整個負載范圍的效率,很低的空載功率損耗確保了運行高效率。單相電網寬電壓輸入、直流供電、寬工作溫度范圍、全面的驗證,以及專門針對容性負載進行優化設計的開關特性,使得它們尤其適用于通用目的。這此電源性能可靠,采用平型、級式配置,可以極其靈活地用于例如配電板等的各種大量應用。

    要進一步提高 24 V 電源的可用性,可將 LOGO!Power 電源與 DC UPS冗余選擇性模塊結合使用。

    主要產品亮點

    • 5 V DC/ 3 A 和 6.3 A、12 V DC/ 1.9 A 和 4.5 A、15 V DC/ 1.9 A 和 4 A 以及 24 V DC/ 1.3 A、2.5 A 和 4 A
    • 單相,輸入范圍寬,適用于 85 V 至 264 VAC 或 110 V 至 300 VDC
    • 扁平 LOGO! 設計,安裝深度僅為 55 mm
    • 在整個負載范圍內具有高效率,空載損耗低
    • 起動時的功率儲備可達容性負載額定電流的 1.5 倍
    • 溫度范圍寬,-20 ~ +70℃
    • 獲得全面認證,如 cULus、CB、FM、ATEX、cCSAus Class I Div. 2、GL 和 ABS

    he flat power supply unit for distribution boards

    Small. Clever. LOGO!Power

    Thanks to its stepped profile design, the LOGO!Power product family is ideally suited for low installation depths, such as in miniature distribution boards. The stabilized power supplies with a wide range input of 100 … 240 V AC (85 … 264 V) and110 ... 300 V DC are available in two performance classes with an output voltage of 5 V and 15 V, in three performance classes with 12 V and in four performance classes with 24 V. The 12 V and 24 V versions are ideal for supplying LOGO! controllers with the corresponding voltage input. The high level of efficiency across the entire load range as well as the low no-load losses result in lower overall energy consumption. Greater convenience when commissioning and servicing thanks to the integrated current monitor. The extended temperature range from -25 °C to +70 °C enables a host of additional applications.

    To further increase 24 V availability, the 24 V LOGO!Power power supply units can be combined with DC-UPSredundancy and selectivity modules.

    LOGO!Power is the ideal choice when components need to be supplied with DC voltage. It can provide currents up to 4 A. This mini power pack can be used regardless of industry, e.g. in building technology applications for light and heating controllers or for access control systems. LOGO!Power is also well-suited for use in industrial automation, such as in packaging machine, machine tool, conveyor belt or sorting system applications.

    Main product highlights

    • Low width
      with minimum of 18 mm to maximum of 72 mm, thus requiring very little space in the control cabinet
    • High energy efficiency
      with efficiency levels of up to 90% over the entire power range and ERP-compliant no-load losses of < 0.3 W
    • Global use
      thanks to extended operating temperature range from -25 °C to +70 °C (previously -20°C) and international certifications
    • Load monitoring
      thanks to real-time measurement of output current without disconnecting the cable, i.e. without interrupting the DC supply (new)
    • Flexible mounting
      with standard rail or wall mounting in different installation POSTTTIONs
    • Wide portfolio
      with 11 devices with 5 V, 12 V, 15 V and 24 V DC up to 100 watts (new: 12 V/0.9 A and 24 V/0.6 A)
    • Flexible deployment
      on all standard single-phase supply networks thanks to wide range input of 100-240 V AC without switchover and operation on DC networks with 85 – 300 V DC
    • Reliable
      thanks to assured connection of high loads when starting up as well as constant current in the event of overload

    功能強大的標準電源

    單相和三相 SITOP smart 是通用型和功能強大的標準電源,適用于工廠機器設備。雖然結構十分緊湊,但它們具有優異的過載響應:由于功率提升 150 %,可毫無問題地連接較高功耗的負載;120% 的固定過載能力為擴展提供了功率儲備。這些電源具有高能效,能耗低,在控制柜內的散熱量很小。

    要進一步提高 24 V 電源的可用性,可將 SITOP smart 電源與緩沖DC UPS冗余選擇性模塊結合使用。

    主要產品亮點

    • 單相,24 V DC/2.5 A、5 A、10 A 和 20 A 以及 12 V/7 A 和 14 A
    • 三相,24 V DC/10 A、20 A 和 40 A
    • 設計緊湊 – 無需留出側面間隙
    • 具有額定電流的 1.5 倍的額外電源 (5 s/min),允許短暫的功能過載
    • 在高達 45 °C 環境溫度下具有 1.2 倍額定電流的*性過載能力(24 V 型號)
    • 效率高達 91.5 %
    • 可調輸出電壓用來補償電壓降
    • 信號觸點可方便地集成到工廠監視系統中
    • 溫度范圍寬:-25 或 -10 至 +70 °C
    • 通過全面認證,如 CULus、ATEX 或 GL
    •  


感興趣的產品PRODUCTS YOU ARE INTERESTED IN

智慧城市網 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.cmr6829.com,All rights reserved.

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,智慧城市網對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~