Dk0010 temperature sensor
Dk0010 temperature sensor are dual-loop process controllers and display instruments based on advanced microprocessor technology. They can control and display process parameters such as temperature, pressure and flow. The instrument is flexible in setting, convenient in configuration and simple in operation.
Product features
12 types of analog input signals are supported, double input channels.
Support SHT1x digital temperature and humidity sensor input
Two way position control relay output, relay closing action can set action protection time interval.
Two way alarm relay output
Two way output current output
Photoelectric isolation Modbus Communication
Selection size
Outline size: 88.38*130.38*32mm
Installation size: 130.38mm
Detailed parameters
Input signal range: 12 standard signal inputs.
Accuracy: temperature + 3%RH (5%RH-95%RH, 25 C)
Humidity + 0.5 C
Output signal simulation: 4-20MA, 0-20MA, 0-10MA
Local control and alarm output (optional):
Temperature master 2A (250V AC)
Temperature alarm 2A (250V AC)
Humidity master 2A (250V AC)
Humidity alarm 2A (250V AC)
Transmitter working temperature: -20 C ~+60 C
Transmitter working humidity: 0%RH~80% RH
Probe working temperature: -40 C ~+120 C
Probe working humidity: 0%RH~* RH
Long term stability temperature: less than 0.1 /Y
Long term stability humidity: less than 1%RH/Y
Response time temperature: less than 18S
Response time humidity: less than 6S
Communication protocol: MODBUS RTU (RS485 interface, two wire system)
Driving distance: 1200 meters
Check mode: no check, odd check, even check.
Address range: 1~247
Baud rate: 4800960019200
Communication data format: one start bit, eight bit data bits, one stop bit.
Power supply: DC 24V + 10%
Power consumption: 4 watts
Protection level: IP66
