General specifications |
---|
Number of read/write heads | max. 2 alternatively 1 read/write head and 1 trigger sensor |
UL File Number | E87056 |
Functional safety related parameters |
---|
MTTFd | 140 a |
Mission Time (TM) | 10 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
---|
LEDs 1, 2 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
LEDs CH1, CH2 | green: read head detected red: Configuration error |
LED PWR/ERR | green: power on yellow: system is starting red: PROFINET bus failure |
Rotary switch | Address setting |
Electrical specifications |
---|
Rated operating voltage | 20 ... 30 V DC , PELV |
Ripple | ≤ 10 % at 30 V DC |
Current consumption | ≤ 4 A incl. read/write heads |
Power consumption | 3.5 W Without read/write heads |
Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
Interface 1 |
---|
Physical | Ethernet |
Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
Interface 2 |
---|
Physical | Ethernet |
Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
Transfer rate | 10 MBit/s or 100 MBit/s |
Directive conformity |
---|
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007 |
Standard conformity |
---|
Degree of protection | IEC 60529:2001 |
Ambient conditions |
---|
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
Mechanical specifications |
---|
Degree of protection | IP67 |
Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw Ethernet: M12 plug connection |
Material | |
| Housing | Powder coated zinc |
Installation | screw fixing |
Mass | approx. 500 g |