雅馬哈MGP12XU調音臺
MGP16X / MGP12X Specifications
Outline MGP16X MGP12X
Mixing capability Mixing channels 16 Line Inputs (8 mono and 4 stereo) 12 Line Inputs (4 mono and 4 stereo)
GROUP 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus
AUX 2 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends
Input channel functions Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
I/O Mic inputs MIC: 10 MIC:6 (100Hz 12dB/oct)
Phantom power 48V phantom power per channel 48V phantom power per channel
Line inputs LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
Digital I/O USB Audio USB IN: iPod, iPhone exclusive USB Audio USB IN: iPod, iPhone exclusive雅馬哈MGP12XU調音臺
General specifications MGP16X MGP12X
Total harmonic distortion 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu)
Frequency response +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise level Equivalent input noise -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Residual output noise -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Crosstalk -74dB @ 1kHz -74dB @ 1kHz
Power requirements 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz
Power consumption 55W max 45W max
Dimensions W 447mm 348mm
H 143mm 143mm
D 495mm 495mm
Net weight 9.0kg 7.5kg
Analog input specifications
Input terminal Actual source
impedance For use with
nominal Input level Connector
PAD GAIN Sensitivity*1 Nominal Max.
before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16 0 -60dB 3kΩ 50-600Ω
Mics -80 dBu
(0.078 mV) -60 dBu
(0.775 mV) -40 dBu
(7.75 mV) XLR-3-31 type*2
Phone jack*4
-16dB -36 dBu
(12.3 mV) -16 dBu
(123 mV) +4 dBu
(1.23 V)
26dB -34dB 600Ω
Lines -54 dBu
(1.55 mV) -34 dBu
(15.5 mV) -14 dBu
(155 mV) Phone jack*3
+10dB -10 dBu
(245 mV) +10 dBu
(2.45 V) +30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24 -34dB 10kΩ 600Ω
Lines -54 dBu
(1.55 mV) -34 dBu
(15.5 mV) -14 dBu
(155 mV) Phone jack*4
RCA Pin Jack
+10dB -10 dBu
(245 mV) +10 dBu
(2.45 V) +30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16 10kΩ 600Ω
Lines -20 dBu
(77.5 mV) 0 dBu
(0.775 V) +20 dBu
(7.75 V) Phone Jack*5
ST CH INSERT INPUT L,R 10kΩ 600Ω
Lines -20 dBu
(77.5 mV) 0 dBu
(0.775 V) +20 dBu
(7.75 V) Phone Jack*5
TALKBACK INPUT 10kΩ 50-600Ω
Mics -66 dBu
(0.389 mV) -50 dBu
(2.45 mV) -30 dBu
(24.5 mV) XLR-3-31 type*6
0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
