當前位置：北京金山恒豐科技有限公司>>智能集中控制系統>>XTP T HDMI 用于 HDMI 信號的 XTP 發送器

XTP T HDMI 用于 HDMI 信號的 XTP 發送器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2021-10-12 14:38:44瀏覽次數：566次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  智能集中控制系統

全部產品列表

暫無信息

北京金山恒豐科技有限公司

經營模式：其他

商鋪產品：455條

所在地區：

詢價 給他留言

產品簡介

通過單根 CATx 屏蔽電纜傳輸視頻、音頻、雙向 RS-232 和紅外，以及以太網信號至 100 m 遠的距離支持分辨率高達 1920x1200 的計算機和視頻信號，包括 1080p 60 深色和 2K

詳細介紹

Extron XTP T HDMI 是一款 XTP® 發送器，可通過單根 CATx 屏蔽電纜將視頻、音頻、雙向 RS-232 和紅外及以太網信號發送至 100 m 遠的距離。它符合 HDCP 標準，并支持分辨率高達 1920x1200 的計算機和視頻信號，包括 1080p/60 深色和 2K。此發送器也可通過以太網擴展、雙向 RS-232 和紅外插入功能來實現局域網接入和遠端視音頻設備的控制。XTP T HDMI 發送器與 XTP Systems®配合使用，可用于遠程終端之間的信號分配和長距離傳輸。

特性

通過單根 CATx 屏蔽電纜傳輸視頻、音頻、雙向 RS-232 和紅外，以及以太網信號至 100 m 遠的距離

支持分辨率高達 1920x1200 的計算機和視頻信號，包括 1080p/60 深色和 2K

HDMI 環通，帶可選擇的音頻控制

符合 HDCP 標準

支持遠程供電

強烈建議使用 Extron XTP DTP 24 屏蔽雙絞線電纜，以達到的性能表現

用于視音頻設備控制的雙向 RS-232 和紅外插入

EDID 管理器 (EDID Minder®) 自動地管理已連接設備之間的 EDID 通信

密鑰管理器 (Key Minder®) 持續地驗證 HDCP 標準，用于快速、可靠的切換

以太網擴展

可選擇的模擬立體聲音頻輸入加嵌

音頻輸入增益及衰減

兼容所有的 XTP 產品

UL 2043 阻燃級

經 JITC 認證

Video
Gain	Unity
Resolution range	Up to 1920x1200, 2K, or 1080p (HDTV) reduced blanking
Signal type	Single-link HDMI (or DVI-D*)
Digital video	RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz)
EDID and DDC	Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP	Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
HPD	Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate	6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock	165 MHz
Formats	RGB and YCbCr digital video
Standards	DVI 1.0, HDMI, HDCP 1.1

Video input and loop-through
Number/signal type	1 single link HDMI (or DVI-D) input 1 single link HDMI (or DVI-D) loop-through
Connectors	2 female HDMI type A: 1 input, 1 loop-through

Interconnection between transmitter and receiver
Connectors	1 female RJ-45 per unit
Termination standards	TIA/EIA T568B
Signal transmission distance	330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	<0.1%, 20 Hz - 20 kHz at nominal level
S/N	>90 dB, at maximum balanced output (unweighted)
Crosstalk	≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
Sampling rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths	16, 20, 24 bit

Audio input
Number/signal type	1 analog stereo, balanced/unbalanced or 1 digital audio, de-embedded from HDMI
Connectors	(1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video input)
Source formats	LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, DOlby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Impedance	10k ohms, unbalanced, 20k ohms balanced
Nominal level	+4 dBu, -10 dBV configurable
Maximum level	+21 dBu balanced, +15 dBu unbalanced
Input gain adjustment	-18 dB to +24 dB, 1 dB steps, adjustable
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Communications — transmitter
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)

Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output	1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input	RS-232 (+5 V) via a (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Baud rates	Up to 115200 baud
Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = GND
Ethernet pass-through port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
IR control pin configuration	3 = GND, 4 = IR Tx, 5 = IR Rx

General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumption
Device	8.1 watts, 12 VDC
Device and power supply	9.6 watts, 12 VDC
NOTE Each XTP transmitter can be powered either locally by an external power supply or remotely using an optional power injector.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents
Thermal dissipation
Device	27.6 BTU/hr
Device and power supply	32.6 BTU/hr
Mounting
Rack mount	Yes, with optional 1U high rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	1.6 lbs (0.7 kg)
Shipping weight	4 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
EMI/EMC	CE, C-tick, FCC Class A, ICES, KCC, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.