當前位置：北京金山恒豐科技有限公司>>智能集中控制系統>>XTP R HD 4K 用于 HDMI 信號的 XTP 4K 接收器

XTP R HD 4K 用于 HDMI 信號的 XTP 4K 接收器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2021-10-12 14:40:13瀏覽次數：734次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  智能集中控制系統

全部產品列表

暫無信息

北京金山恒豐科技有限公司

經營模式：其他

商鋪產品：455條

所在地區：

詢價 給他留言

產品簡介

通過單根 CATx 屏蔽電纜在 100 m（330 ) 遠的距離上接收帶嵌入音頻的視頻、雙向 RS-232 和紅外及以太網信號支持分辨率高達 4K 的計算機和視頻信號用于視音頻控制的雙向 RS-232 和紅外插入符

詳細介紹

Extron XTP R HD 4K 是一款接收器，可通過單根 CATx 屏蔽電纜延長視頻、音頻、雙向控制和以太網信號。這款符合 HDCP 2.2 標準的接收器支持分辨率高達 4K 的視頻信號。為了簡化集成，它提供了可選的 HDMI 音頻直通、音頻解嵌至數字 S/PDIF 或模擬立體聲音頻輸出以及用于房間控制的繼電器。以太網擴展及雙向 RS-232 和紅外插入功能方便了局域網接入和遠程視音頻設備控制。通過屏蔽雙絞線電纜可將信號傳輸至 100 m (330') 遠的距離。XTP R HD 4K 支持遠程供電，是需要將信號長距離傳輸至顯示器和其它輸出設備的 XTP Systems® 的理想之選。

特性

通過單根 CATx 屏蔽電纜在 100 m（330') 遠的距離上接收帶嵌入音頻的視頻、雙向 RS-232 和紅外及以太網信號

支持分辨率高達 4K 的計算機和視頻信號

用于視音頻設備控制的雙向 RS-232 和紅外插入

符合 HDCP 2.2 標準

HDCP 可視確認 — 當處理 HDCP 加密的內容時，如果視頻輸出連接至一個不符合 HDCP 標準的顯示設備，圖像解析度轉換器即會輸出一個全屏的綠色信號，可以從視覺上立刻確認被保護內容無法顯示在此顯示設備上

支持遠程供電

強烈建議使用 Extron XTP DTP 24 屏蔽雙絞線電纜，以達到的性能表現

支持 HDMI 參數標準，包括高達 10.2 Gbps 的數據速率、高達 12 位的色深、3D 和高清無損的音頻格式

全面的 EDID 管理 — 過 XTP System Configuration 軟件訪問 EDID Minder，用于設置視頻輸入 EDID、捕獲來自連接顯示設備的 EDID 或上傳定制的 EDID 文件。正確的 EDID 管理確保信號源和顯示設備能輕松地集成至系統中，從而實現優化的系統操作。可免費下載 EDID Manager 2.0 軟件，以提供高級 EDID 編輯及創建定制的 EDID 文件。

EDID 管理器 (EDID Minder®) 自動地管理已連接設備之間的 EDID 通信

密鑰管理器 (Key Mindersup>®) 持續地驗證 HDCP 標準，用于快速、可靠的切換

以太網擴展

HDMI 音頻解嵌，帶模擬立體聲和數字 S/PDIF 音頻輸出

音頻輸出音量調節和*功能

可選的 HDMI 音頻直通

2 個繼電器，用于控制房間功能

兼容所有的 XTP 產品

經 JITC 認證

隨附外置 Extron Everlast™ 電源，產品編號 #70-1174-01 — 該通用型電源具有經驗證的高可靠性和低功耗，能夠降低運行成本

Extron Everlast 電源可享受 7 年部件及人工保修

Video
Gain	Unity
Resolution range	Up to 2560x1600 @ 60 Hz* or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling * reduced blanking
Signal type	Single-link HDMI (or DVI-D or DisplayPort)
Maximum data rate	10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock	300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)
Formats	RGB and YCbCr digital video
Standards	DisplayPort 1.1, DVI 1.0, HDMI 1.4; HDCP 2.2

Interconnection between transmitter and receiver
Connectors	1 female RJ-45 per unit
Termination standards	TIA/EIA T568B
Signal transmission distance	330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Video output
Number/signal type	1 single link HDMI (or DVI-D)
Connectors	1 female HDMI type A

Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise	<0.1% @ 20 Hz - 20 kHz at nominal level
S/N	>90 dB, at maximum balanced output (unweighted)
Crosstalk	≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
Sampling rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths	16, 20, 24 bit

Audio output
Number/signal type	1 analog stereo (2-channel), balanced/unbalanced 1 digital audio, embedded with HDMI output 1 digital audio via S/PDIF output connector
Connectors	(1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video output) 1 female RCA jack (tip, ring)
Supported formats
HDMI	LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos®, Dolby® TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
S/PDIF	LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Analog	Analog stereo audio
Impedance
Analog	50 ohms unbalanced, 100 ohms balanced
Digital	75 ohms (for S/PDIF output)
Maximum level (Hi-Z)	>+12 dBV balanced; +6 dBV unbalanced
Gain error	±0.5 dB channel to channel
Volume control range	-100 dB to 0 dB (control 0 to 100 in 1 dB steps)
NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Communications — receiver
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)

Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output	1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input	RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Baud rates	Up to 115200 baud
Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
Ethernet pass-through port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
Relay number/type	2 normally open relays
Relay control connectors	(1) 3.5 mm captive screw connectors, 4 pole
Relay control contact rating	24 V, 1 A

General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Device	9.1 watts, 12 VDC
Device and power supply	11.3 watts, 12 VDC
NOTE The XTP receiver can be powered either locally by an external power supply or remotely using an optional power injector or XTP CrossPoint matrix switcher.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on sides and top
Thermal dissipation
Device	30.0 BTU/hr
Device and power supply	37.6 BTU/hr
Mounting
Rack mount	Yes, with optional 1U high rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 8.68" W x 6.0" D (half rack wide) (2.5 cm H x 22.1 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	1.6 lbs (0.7 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.