DWYER二氧化塔傳感器CDTC系列

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地西安市

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2024-05-31 09:14:31瀏覽次數：109次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  流量開關
  WIKA產品

DWYER流量開關

DWYER數據采集器

DWYER風量罩

西門子壓力差壓溫度變送器

DWYER測試儀表

DWYER風速套件

效驗泵/活塞壓力計

DWYER校驗儀

DWYER燃燒測試

DWYER二氧化碳測試
  Dwyer溫濕度產品
  Dwyer過程控制

暫無信息

陜西正捷工程科技有限責任公司

經營模式：其他

商鋪產品：1183條

所在地區：

詢價 給他留言

產品簡介

TheSeriesCDTCCommunicatingCarbonDioxideSensorcombinesthefunctionoftworoomsensorsintoasingle,compacthousing

詳細介紹

The Series CDTC Communicating Carbon Dioxide Sensor combines the function of two room sensors into a single, compact housing. Parameters include carbon dioxide, temperature, and temperature set point with override. By having field selectable Modbus® and BACnet Communications, only four wires are needed for power and the communication signal. The communicating detectors can be daisy chained together to further reduce installation cost. In order to reduce the set up time, the RS-485 MAC address is set up using on-board DIP switches. A second set of DIP switches are used to select whether output is Modbus® RTU or BACnet MS/TP communication protocols and to limit access to the set up menu.

Like our Series CDT Carbon Dioxide Transmitter, the Series CDTC uses a Single Beam Dual Wavelength Non-Dispersive Infrared (NDIR) sensor to measure the carbon dioxide level. This technology can be used in installations that will be occupied 24 hours per day. For improved accuracy, the transmitter can be field calibrated to the environmental conditions of the installation. Also, the barometric pressure can be programmed to correct for altitude.

Optional local and remote displays are available to display any of the parameters. For applications in which the building occupants aren’t familiar with CO2 concentrations, the LCD can be programmed to display temperature or temperature set point instead.

Range:0 to 2000 or 5000 PPM CO2 (depending on model); 32 to 122°F (0 to 50°C) temperature.

Accuracy:±40 PPM ±3% of reading carbon dioxide; ± 1°C @ 25°C temperature.

Response Time:<2 minutes, diffusion, carbon dioxide.

Sensor Technology:NDIR (non-dispersive infrared); 15 year light source.

Temperature Limits:32 to 122°F (0 to 50°C).

Output:2-wire RS-485, Modbus® RTU or BACnet MS/TP communication protocol.

Temperature Dependence:±8 PPM / °C at 1100 PPM carbon dioxide.

Non-Linearity:16 PPM carbon dioxide.

Pressure Dependence:0.13% of reading per mm Hg carbon dioxide.

Humidity Limits:10 to 95% RH (non-condensing).

Power Requirements:10-42 VDC or 10-30 VAC.

Weight:4.4 oz (125 g).

Agency Approvals:BTL, CE.

Model	Description
CDTC-2E000	Communicating carbon dioxide transmitter with temperature output, 2000 PPM range and European housing
CDTC-2E000-LCD	Communicating carbon dioxide transmitter with temperature output, 2000 PPM range, European housing an LCD display
CDTC-2N000	Communicating carbon dioxide transmitter with temperature output, 2000 PPM range and North American housing
CDTC-2N000-LCD	Communicating carbon dioxide transmitter with temperature output, 2000 PPM range, North American housing and LCD display
CDTC-5E000	Communicating carbon dioxide transmitter with temperature output, 5000 PPM range and European housing
CDTC-5E000-LCD	Communicating carbon dioxide transmitter with temperature output, 5000 PPM range, European housing and LCD display
CDTC-5N000	Communicating carbon dioxide transmitter with temperature output, 5000 PPM range and North American housing
CDTC-5N000-LCD	Communicating carbon dioxide transmitter with temperature output, 5000 PPM range, North American housing and LCD display