當前位置：東莞市力高大同自動化設備有限公司>>類別檢索>>NF 回路設計>>計測系統 MS-500系列

計測系統 MS-500系列

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號MS-500系列

品牌

廠商性質其他

所在地東莞市

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2023-11-10 10:22:11瀏覽次數：285次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  類別檢索

LECROY

Iwatsu

N4L 牛頓

EMtrace

NF 回路設計

全部產品列表

暫無信息

東莞市力高大同自動化設備有限公司

經營模式：其他

商鋪產品：138條

所在地區：廣東東莞市

詢價 給他留言

產品簡介

簡　　述： The MS-521/523/525 is the mainframe unit with built-in power supply used to house the MS-500 series plug-in units.

詳細介紹

24dB/oct Filter · 48dB/oct Filter P-81 / P-82 / P-83 / P-84 / P-85

Features


P-81	P-82	P-83	P-84

	Four modes : Lowpass (Maximum Flatness and Phase-Linear), Highpass and THRU
	16 selectable points for highresolution control of cutoff frequency
	Cascade mode enables simple cascade connection to neighboring units
	Input ground line is floatable, enabling the elimination of induced noise caused by ground loops

Model	Cut-off frequency range	Rolloff
P-81	0.1Hz to 1.6kHz	24dB/oct
P-82	1Hz to 16kHz	24dB/oct
P-83	0.1Hz to 1.6kHz	48dB/oct
P-84	1Hz to 16kHz	48dB/oct

Specifications

Mode	Lowpass (MF, PL), Highpass and THRU
No. of amplifier and filter units	Maximum of 4 channels
Cutoff frequency setting	1, 2………15, 16 (16 points), plus multipliers
Input method	CASCADE (The output of left-side unit is connected.), FLOAT, GND (single-ended input)
Input impedance	100k ohm // 40pF
CMRR	60dB or greater (DC to 1kHz)
Output voltage	±10V
Phase matching between the same type units	P-81 : ±1o typ., P-82 : ±1.2o typ., P-83 : ±1o typ., P-84 : ±2.2o typ. (LP, DC to 2fc, purchased together)

48dB/oct Filter P-85

P-85

Features
	Wide cutoff frequency range :0.1Hz to 119.9kHz
	High resolution : 3-digits
	Four filter modes

Specifications

ModelCutting frequency range	0.1 to 119.9kHz
P-81Rolloff	48dB/oct
P-82Modes	Lowpass (ML, PL), Highpass and THRU
P-83Cutting frequency setting	0.1, 0.2, 0.3, …119.9 (1199 points) plus multipliers
P-84Input method	CASCADE (The output of left-side unit is connected.), FLOAT, GND (single-ended input)
Input impedance	100k ohm // 40pF
CMRR	60dB or greater (DC to 1kHz)
Output voltage	±10V
Phase matching between the same type units	±5.5otyp. (LP, DC to fc, purchased together)

135dB/oct Filter P-86 / P-87


P-86	P-87

Features
	Sharp rolloff equivalent to 135dB/oct
	The combination of P-86 and P-87 configures a bandpass filter

Specifications

Cutting frequency range	P-86 : 1Hz to 119kHz, P-87 : 1Hz to 20kHz
Rolloff	Equivalent to 135dB/oct (8-pole Elliptic)
Modes	P-86 : Lowpass, P-87 : Highpass
Cutting frequency setting	1, 2, 3,…119 (119 points) plus multipliers
Input method	CASCADE (The output of left-side unit is connected.), FLOAT, GND (single-ended input)
Input impedance	100k ohm // 40pF
CMRR	60dB or greater (DC to 1kHz)
Output voltage	±10V
Phase matching between the same type units	±5.5otyp. (LP, DC to fc, purchased together)

P-61

Features
	Wide bandwidth
	High gain
	High CMRR

Specifications

Input type	Balanced differential input
Input impedance	100M ohm
Gain	1 to 1000, 1-2-5 steps
Gain accuracy	±0.2% at 400Hz (no load, 25oC)
Non-linearity	±0.02% or better (DC, no load)
CMRR	120dB or greater (at DC to 120Hz)
DC offset	±2µV / oC (input-referred value)
Frequency response	±0.1dB (at DC to 10kHz) +0.5 to -3dB (at DC to 100kHz)

Isolation Amplifier P-62A / P-64


P-62A	P-64

Features
	High withstanding voltage
	Wide bandwidth enabling excellent waveform transfer characteristics

Specifications

Model	P-62A	P-64A
Isolation voltage	±1000V DC continuous, ±1500Vrms (1 minute, 48 to 62Hz)	±1000V DC continuous, ±2000Vrms (1 minute, 48 to 62Hz)
IMRR	150dB or more (DC to 60Hz)
Gain	0.1 to 1000, 1-2-5 sequence
Input type	Single-ended
Input impedance	1M ohm // 50pF	1M ohm // 60pF
Frequency response	DC to 100kHz (-3dB)	DC to 1MHz (+1dB, -3dB)
Filter	---	Lowpass : 100kHz, 1kHz, 10kHz Highpass : 10kHz, 1kHz, 100kHz
Output voltage	±10V

Specifications

Model	MS-521	*MS-523^2**	MS-525
No. of amplifier and filter units	Maximum of 4 channels	Maximum of 8 channels	Maximum of 16 channels
Power supply	AC100 (120, 200, 220 or 240V is available.)	DC11 to 15V, or AC100V	AC100, 120, 200, 220, 240V
Control or GPIB unit	Not applicable	Applicable by P-42A	Applicable by P-42A
Dimensions	119.5(W) x 199(H) x 400(D)	283.5(W) x 199(H) x 450(D)	480(W) x 199(H) x 400(D)
Weight ^*1	5.0kg	6.1kg	12.2kg