0.6/1kV交聯聚乙烯絕緣電力電纜
XLPE Insulated Power Cable
產品標準 standard
本產品按GB12706《額定電壓35KV銅芯、鋁芯塑料絕緣電力電纜》標準生產，同時還可根據用戶需要按電工委員會*標準IEC、英國標準、德國標準及美國標準生產。The product is manufactured according to the standard of GB12706、IEC.BS,DINICEA upon request.
適用范圍 Applications
本產品適用于工頻額定電壓64/1KV及以下配電網或工業裝置中固定敷設之用。
The product is suitable for use in power distribution lines or fixed installations with rated power- frequency voltage up toincluding 0.6/1Kv.
使用特性 Operating characteridtles
·工頻額定UO/U為0.6/1KV。
Rated power –frequency voltage UO/U為0.6/1KV。
電纜導體允許*zui高工作溫度為90℃。
Max.permissible continuous operating temperature of conductor:90℃.
短路時（zui長持續時間不超過5s）電纜導體的zui高溫度不超過250℃。
Max.short –circuit temperature of conductor shall not exceed 250℃（5s maximum duration ）.
電纜敷設時環境溫度應不低于0℃。
The ambient temperature under installation should not below 0℃.
電纜彎曲半徑：不小于電纜外徑的15倍。
The bending radius should not less than 15 times of cable diameter.
