| Opt. 01 | Tracking Generator | · Frequency range: 150kHz ~ 1GHz · Amplitude range: -50 ~ 0dBm · Amplitude resolution: 1dB · Amplitude accuracy: ±1dB @ 0dBm, 80MHz · Attenuation accuracy: ±1dB @ 50MHz · Amplitude flatness: ±1dB @10MHz/div, 1.5dB @0dB, entire band · Harmonics: < -30dBc (<-25dBc, 150kHz ~ 10MHz) · Reverse power: < +30dBm · Impedance: 50 ohm nominal · Return loss: < 10dB (VSWR < 2) · Connector: Type N female |
| Opt. 02 | Power Meter | · Frequency Range: 10MHz ~ 2 GHz, usable to 2.7GHz · Power Level Range: -20 dBm ~ +23 dBm, usable to +30 dBm · Power Level Overload: +40 dBm < 10% duty cycle, < 10 mS duration · Return Loss: < 1:1.35 VSWR into 50 ohms, < 1:1.25 typical · Readout Resolution: 0.2 mW, 100 mW scale, 2 W, 1 mW scale; 0.1dB, Log scale · Accuracy: ±(10% rdg 1digit) · Readout: mW or dBm |
| Opt. 03 | Remote Control Software | · Connecting PC to get the trace and provide the control for setting |
| OPTIONAL ACCESSORIES |
| ATA-001 | BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers) |
| ATA-002 | Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) |
| RLB-001 | Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz |
| GTP-3000 | Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm |
| GKT-001 | General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1 |
| GKT-002 | CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1 |
| GKT-003 | RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1 |
| GKT-006 | EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1 |
| GTL-301 | RF Cable RG 223 N(P/M), 1000mm
|
