碳化硅石墨坩堝如何正確驗收和搬運 碳化硅坩堝貨品驗收
Acceptance of goods
收到貨品時，應檢查貨品的外包裝是否完好無損。開箱后檢查坩堝表面有無缺損、裂紋、檢查涂層有無損壞.
Receipt of goods, should check the packaging of goods is intact. Check the crucible surface after unpacking for defects, cracks, check the coating for damage.
碳化硅坩堝的搬運
Crucible handling
錯誤的做法：坩堝在搬運過程中，受到敲打或被滾動，其釉層會被破壞。
Wrong practice：In the course of handling, the crucible is struck or rolled, and the glaze layer is destroyed.
正確的做法：應該用墊了軟墊的手推車（或者其它合適的搬運工具）小心地搬運坩堝。
Right practice：You should use the cushion pad cart (or other appropriate handling tools) carefully handling the crucible.
為了更好的保護坩堝的釉層，搬運坩堝時必須非常小心，要輕取輕放，避免發生敲打、碰撞或跌落的現象，更不能把坩堝橫放在地面上滾動運輸。坩堝的釉層一旦受損，會導致坩堝在使用過程中容易發生氧化和老化現象。應該用墊了軟墊的手推車（或者其他合適的搬運工具）小心的搬運坩堝。
In order to better protect the glaze layer of the crucible, you must be very careful when handling the crucible, to avoid them gently, beat, collision or falling phenomenon, not to the crucible across the ground rolling transportation. If the glaze layer is damaged, it will lead to oxidation and aging. You should use the cushion pad cart (or other appropriate handling tools) carefully handling the crucible.
