| SPECIFICATIONS |
| MODEL | 7110 | 7112 | 7120 | 7122 |
| AC WITHSTAND VOLTAGE |
| Output Rating | 5KVAC/12mA |
| | Range | Resolution | Accuracy |
| Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） |
| Output Frequency | 50Hz/60Hz ±100ppm, User Selection |
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 |
| Output Regulation | ± (1% of output + 5V), From no load to full load |
| SETTINGS |
| Hi-Limit AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of setting + 2counts） |
| Lo-Limit AC Current, mA | 0.00 - 12.00 | 0.01 | ±（2% of setting + 2counts） |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） |
| Dwell Time, second | 0, 0.2 - 999.9
(0=continuous) | 0.1 |
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) |
| DC WITHSTAND VOLTAGE (7120,7122 ONLY) |
| Output Rating | 6KVDC/5mA |
| Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） |
| Output Ripple | <5%（6KV/5mA at Resistive Load） |
| SETTINGS |
| Hi-Limit DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of setting + 2counts） |
| Lo-Limit DC Current, mA | 0.00 - 5.00 | 0.01 | ±（2% of setting + 2counts） |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） |
| Dwell Time, second | 0, 0.2 - 999.9
(0=continuous) | 0.1 |
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) |
| Discharge Time | < 200 msec |
| INSULATION RESISTANCE (7112,7122 ONLY) |
| Output Rating | 1KVDC/1000MΩ |
| Output Voltage, KVDC | 0.10 - 1.00 | 0.01 | ±（2% of setting + 3V） |
| SETTINGS |
| Hi-Limit Resistance, MΩ | 0, 1 - 1000 (0=OFF) | 1 | ±（3% of setting+2counts）at > 500VDC |
| Lo-Limit Resistance, MΩ | 1 - 1000 | 1 | ±（7% of setting +2counts）at <500VDC |
| Delay Time, second | 0, 0.5 - 999.9
(0=continuous) | 0.1 | ±（0.1% + 0.05sec） |
| MEASUREMENT |
| AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） |
| DC Voltage, KV (IR only) | 0.10 - 1.00 | 0.01 | ±（1.5% of reading + 3V） |
| AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of reading + 2counts） |
| DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of reading + 2counts） |
| Resistance, MΩ | 1 - 1000
(Auto Range) | 0.001
0.01
0.1 | ±（3% of reading+2counts）at > 500VDC
±（7% of reading +2counts）at <500VDC |
| GENERAL |
| Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast |
| PLC Remote Control | Input : Test , Reset |
| Output : Pass , Fail , Processing |
| Memory | 5 Sets Store/Recall of each Memory, 4 Test Mode Selectable （W, I, W～I(xiàn), I～W Only 7112, 7122） |
| Display | 16×2 LCD with back light |
| Key Lock | To prevent unauthorized alteration of the test Parameters |
| Calibration | Build-in software and external calibrated meters |
| Environment | 0-40℃, 20-80%RH |
| Dimension/Net Weight | 280mm(W)×89mm(H)×370mm(D)/ 9Kg |
| STANDARD ACCESSORIES |
| Power Cord(10A) | ×1 |
| Fuses | ×3 (Including a spare contained in the fuse holder) |
| Hipot Test Lead ,1.5m(1101) | ×1 |
| Hipot Return Lead ,1.8m(1102) | ×1 |
| *product specifications are subject to change without notice. |
會員1.png)
