通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
泰思泰克(蘇州)檢測儀器科技有限公司
產品介紹:ProductIntroduction:泰思泰克透過材料接觸傳熱性測試儀根據ISO12127-200設計研發并制造
產品介紹:Product Introduction:
泰思泰克透過材料接觸傳熱性測試儀根據ISO12127-200設計研發并制造;該儀器通過加熱鋼柱自由落下接觸試樣及熱量計,模擬在實際使用過程中,高溫金屬飛濺至,測試的傳熱性能;該儀器操作簡單,數據準確,安全可靠,廣泛應用于消防相關公司及檢測部門;(圖片僅供參考)
產品型號Model:TTech-ISO12127-2
符合標準Standard:
ISO12127-2
技術參數Parameters
1、該設備由加熱箱,控制箱及不銹鋼試驗架臺構成;
The equipment consists of Heating oven, control cabinet and stainless steel test bench;
2、鋼柱下降采用電機控制,自動控制滑板,從而使鋼柱自動落下;
The falling of steel cylinder, is controlled by motor and slide plate is controlled automatically, so that the steel cylinder falls automatically;
3、K型鎧裝熱電偶,直徑1.5mm,測溫精度0.1℃;
K type thermocouple with a diameter of 1.5mm and a temperature measurement of 0.1 ℃.
4、加熱箱采用馬弗爐,控制加熱溫度大于800℃;
The Muffle furnace is used in the heating oven to control the heating temperature above 800 ℃
5、設備采用半導體冷卻方式,測試前,使熱量計溫度降至(20±1)℃;
Before the test, the temperature of calorimeter should be reduced to (20 ± 1) ℃.
6、配備兩個配重砝碼,重量(175±5)g;
Equipped with two weights, the weight is (175 ± 5) g;
7、計時器計時范圍9999s,計時精度0.1s;
The timing range of the timer is0- 9999s, and the timing accuracy is 0.1s.
8、熱量計銅盤直徑(8±0.02)mm,厚度(1.7±0.02)mm,并裝配K型溫度傳感器,測溫范圍不低于1000℃;
The dimensions of the copper disc are: diameter (8 ± 0.02) mm and the thickness (1.7 ± 0.02) mm.Comprising a K-type thermocouple inserted into the copper disc. Testing range≥1000℃
9、熱量計支撐臺由鋁塊制成,安裝在塑料底座上;
Support block for the specimen and calorimeter , made of a curved aluminium sheet and fitted on a plastic base element
10、鋼柱直徑(6mm±11μm),高度(12mm±11μm),質量(2.6g±20mg);
Steel cylinder: Diameter: ? 6,0 mm ± 11 µm ,Height: 12 mm ± 11 µm,Mass: 2,6 g ± 20 mg
11、試樣尺寸(180*25)mm;
Sample diameter: (180*25)mm
12、PLC 及觸摸屏智能控制系統;
PLC and touch screen control system
13、升溫PID智能控制,系統自動采集溫度數據(包括實驗開始溫度、溫度,溫差△T、實時溫度);
PID intelligent control, the system automatically collects temperature data (including start temperature, maximum temperature, temperature difference △ T, real-time temperature);
14、試驗數據系統自動計算,自動存儲;
The test data is calculated and stored automatically;
15、設備占地尺寸:1800mm x 600 mm x 800mm;
Dimension:1800mm x 600 mm x 800mm
16、電源 380V 50/60Hz, 功率6000w
AC 220V 50/60Hz, 6000W
17、產品合格證、說明書各一份。
Manual and certificate of quality are provided.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份